Altronix Trove2DM2 Handleiding

Altronix Niet gecategoriseerd Trove2DM2

Lees hieronder de 📖 handleiding in het Nederlandse voor Altronix Trove2DM2 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 130 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Rev. TDMP103017

Trove1DM1

- Trove1 enclosure with Altronix/DMP backplane (TDM1)

TDM1

- Altronix/DMP backplane only

Trove2DM2

- Trove2 enclosure with Altronix/DMP backplane (TDM2)

TDM2

- Altronix/DMP backplane only

Installation Guide

All registered trademarks are property of their respective owners. More than just power.™

Installing Company: Service Rep. Name: _____________________ __________________________________________

Address: Phone #: ________________________________________________________ _________________________

Access & Power Integration

- 2 - Trove1DM1 / TDM1 / Trove2DM2 / TDM2

Overview:

Trove1DM1 and Trove2DM2 accommodate DMP Wiegand Modules with or without Altronix power supplies and 734/734N

accessories for access control systems.

Specifications:

• 16 Gauge backplane and enclosure with ample knockouts for convenient access.

Installation Instructions for Trove1 and Trove2:

1. .Remove backplane from enclosure prior to mounting (do not discard hardware)

2. Trove1DM1 :(Pg. 7)

Mark and predrill holes on the wall to line up with the top two keyholes in the enclosure. Install two upper fasteners and

screws in the wall with the screw heads protruding. Place the enclosure’s upper keyholes over the two upper screws;

level and secure. Mark the position of the lower two holes. Remove the enclosure. Drill the lower holes and install the

two fasteners. Place the enclosure’s upper keyholes over the two upper screws.

Install the two lower screws and make sure to tighten all screws.

Trove2DM2 (Pg. 8):

Mark and predrill holes on the wall to line up with the top three keyholes in the enclosure. Install three upper fasteners

and screws in the wall with the screw heads protruding. Place the enclosure’s upper keyholes over the three upper screws;

level and secure. Mark the position of the lower three holes. Remove the enclosure. Drill the lower holes and install the

three fasteners. Place the enclosure’s upper keyholes over the three upper screws.

Install the three lower screws and make sure to tighten all screws.

3. Mount included UL Listed tamper switch (Altronix Model TS112 or equivalent) in desired location, opposite hinge.

Slide the tamper switch bracket onto the edge of the enclosure approximately 2” from the right side (Fig. 1, pg. 1).

Connect tamper switch wiring to the Access Control Panel input or the appropriate UL Listed reporting device.

To activate alarm signal open the door of the enclosure.

4. Mount Altronix/DMP modules to TDM1 or TDM2 backplane, refer to pages 3, 4.

Fig. 1

Trove1DM1

Trove1 enclosure with TDM1 Altronix/DMP backplane

• Includes: tamper switch, cam lock, lock nuts,

and mounting hardware.

Enclosure Dimensions (H x W x D):

18” x 14.5” x 4.625” (457mm x 368mm x 118mm).

TDM1

Altronix/DMP backplane only

• Includes mounting hardware.

Dimensions (H x W x D):

16.625” x 12.5” x 0.3125” (422.3mm x 317.5mm x 7.9mm).

TDM1 accommodates a combination of the following:

Altronix Modules:

• One (1) AL400ULXB2, AL600ULXB, AL1012ULXB,

AL1024ULXB2,

eFlow4NB, eFlow6NB, eFlow102NB or eFlow104NB.

• One (1) ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB),

PDS8(CB), VR6.

DMP Modules:

• modules.Up to eight (8) DMP 734/734N

Trove2DM2

Trove2 enclosure with TDM2 Altronix/DMP backplane

• Includes: tamper switch, cam lock, lock nuts,

and mounting hardware.

Enclosure Dimensions (H x W x D):

27.25” x 21.75” x 6.5” (692.2mm x 552.5mm x 165.1mm).

TDM2

Altronix/DMP backplane only

• Includes mounting hardware.

Dimensions (H x W x D):

25.375” x 19.375” x 0.325” (644.5mm x 482.6mm x 8.3mm)

TDM2 accommodates a combination of the following:

Altronix Modules:

• Two (2) AL400ULXB2, AL600ULXB, AL1012ULXB,

AL1024ULXB2,

eFlow4NB, eFlow6NB, eFlow102NB or eFlow104NB.

• Two (2) ACM8(CB), MOM5, PD4UL(CB),

PD8UL(CB), PDS8(CB), VR6.

DMP Modules:

• modules.Up to sixteen (16) DMP 734/734N

Edge of

Enclosure

to Access Control

Panel or

UL Listed

Reporting

Device

Enclosure

Tamper

Switch

(provided)

Trove1DM1 / TDM1 / Trove2DM2 / TDM2 - 3 -

Standoff

Altronix

Sub-Assembly or

DMP 734 plastic housing

Backplane

Pan Head

Screw

Pem

TDM1: Configuration of Altronix Power Supply

and/or Sub-Assembly Boards and DMP 734/734N Wiegand Modules

1. Fasten standoffs (provided) to pems that match the hole pattern for Altronix Power Supply/Chargers or Altronix

Sub-Assembly boards . Fasten metal standoffs in the correct locations to provide proper grounding, (Fig. 2, pg. 3)

see below (Fig. 2, pg. 3).

2. Mount boards to standoffs utilizing 5/16” pan head screws (provided) (Fig. 2, 2a, pg. 3).

3. Mount DMP modules into the correct positions 734/734N (Fig. 2, pg. 3):

a. fasten standoffs to appropriate pems on the backplane (Fig. 2, 2b, pg. 3).

b. remove DMP 734/734N board from the plastic housing.

Use the base part of the housing to mount onto TDM1 (Fig. 2b, pg. 3).

c. secure the base of DMP to the standoffs using provided 5/16” pan head screws.734/734N

d. make all necessary connections before reassembling DMP Wiegland.734/734N

4. Fasten TDM1 backplane to Trove1 enclosure utilizing pan head screws (provided).

Altronix

Power

Supply

Metal

Standoff

Placement

Altronix

Sub-

Assembly

734

Interface

Module

734

Interface

Module

734

Interface

Module

734

Interface

Module

734

Interface

Module

734

Interface

Module

734

Interface

Module

734

Interface

Module

734

Interface

Module

734

Interface

Module

734

Interface

Module

734

Interface

Module

Mounting

Standoff

Placement

Fig. 2 - Trove1DM1/TDM1 Conﬁgurations

Fig. 2bFig. 2a

Product specificaties

Merk:	Altronix
Categorie:	Niet gecategoriseerd
Model:	Trove2DM2

Heb je hulp nodig?

Als je hulp nodig hebt met Altronix Trove2DM2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Altronix

Altronix T2MK77F16 Handleiding

8 Februari 2024

Altronix Trove2DM2 Handleiding

8 Februari 2024

Altronix T3MK75F16 Handleiding

8 Februari 2024

Altronix PMK2 Handleiding

8 Februari 2024

Altronix Trove3SH3 Handleiding

7 Februari 2024

Altronix 6062 Handleiding

7 Februari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Lescha S 180 Handleiding

15 November 2024

LC-Power LC6350 V2.3 Handleiding

15 November 2024

Silver Cross Dune Insect Net Handleiding

15 November 2024

Silver Cross Dune Universal Car Seat Adaptors Handleiding

15 November 2024

Silver Cross Dune First Bed Folding Carrycot Stand Handleiding

15 November 2024

Silver Cross Reef Insect Net Handleiding

15 November 2024

Silver Cross Wave Carrycot Handleiding

15 November 2024

Shimano ST-T4000-R Handleiding

15 November 2024

Livarno Lux IAN 365148 Handleiding

15 November 2024

Livarno Lux HG04042 Handleiding

15 November 2024