Altronix Pace1PRMT Handleiding

Altronix Netwerkkaart/adapter Pace1PRMT

Lees hieronder de 📖 handleiding in het Nederlandse voor Altronix Pace1PRMT (4 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 73 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Pace1PRMT - 1 -

Overview:

Pace1PRMT is a long range Ethernet adapter kit which transmits data at 100mbps full duplex and

power via a single twisted pair (UTP) or Cat5e or higher cable in a PoE(+) compliant format. The

Pace1PRM receiver is powered via a PoE midspan such as the Altronix Netway series or by an

endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM trans-

ceiver which in turn passes this power to an enabled IP camera/device. These plug and play units

facilitate cost effective solutions for IP devices that need to be installed at distances greater than

100m. They also provide a simple way to replace legacy analog products with new IP devices over

single twisted pair (UTP) or structured cable.

Features:

Rev. 111413

Installation Guide

Pace1PRMT

IP and PoE+ Over Extended Distance UTP or CAT5e

Pace1PRM Receiver and Pace1PTM Transceiver kit

Agency Listings:

• UL/CUL Listed for Information

Technology Equipment (UL 60950-1).

• CE approved.

• C-Tick compliant.

Input (Pace1PRM):

• Powered by midspan or endspan.

PoE compliant to IEEE 802.3af (15W) and

PoE+ compliant to IEEE 802.3at (30W).

Ethernet:

• Connectivity: RJ45, auto-crossover.

• Wire type: 4-pair CAT5 or 1 pair UTP

structured cable.

• Distance: up to 500m (1,640 ft.).

• Speed: 10/100BaseT, half/full duplex, auto

negotiation. PoE compliant to IEEE 802.3af

(15W) and PoE+ compliant to IEEE 802.3at

(30W) delivered to camera by Pace1PTM.

Power provided by Pace1PRM to Pace1PTM

by PoE protocol.*

• Throughput is rated to pass 100mbps of

data at distances up to 500m with

proper headend equipment, this supports

.Megapixel, HD720, HD1080

CAT5e or higher:

• Distance: up to @ 100mbps 500m

(see Maximum Length of Cable Type vs.

Camera Power/PoE Class, pg. 4).

UTP (single pair):

• Distance: up to @ 100mbps152m

(see Max. Length of Cable Type vs.

Camera Power/PoE Class, pg. 4).

LED Indicators:

• Pace1PRM/Pace1PTM:

Green - PoE ON (by respective RJ45 jack).

• Pace1PRM and Pace1PTM (RJ45 jack):

Yellow and Green LED IP Link status,

10/100Base-T/active.

Environmental:

• Operating and Storage Temperature:

(refer to Technical Specifications

chart pg. 2).

• Humidity: 20 to 85%, non-condensing.

Functions:

• Auto detection and protection of legacy

non-PoE cameras/devices.

Applications:

• Extend Network link distance in an

industrial environment over 700m

.(see note, pg. 2)

• Retrofit digital IP cameras in an analog

CCTV CAT5e wired installations.

• Works with Megapixel, HD720, HD1080

and VGA (SD) cameras (see note, pg. 3).

Mechanical:

• Dimensions (W x L x H approx.):

Pace1PRM/Pace1PTM:

3.5” x 3.5” x 1”

(88.89mm x 88.89mm x 25.4mm).

I.T.E. 43KC

Z1409

* See note on page 3.

- 2 - Pace1PRMT

Installation Instructions:

Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and

with all local codes and authorities having jurisdiction. Wiring should be UL Listed and/or

Recognized wire suitable for the application.

Pace1PTM and Pace1PRM are not intended to be connected to outside plant leads and should be

installed indoors within the protected premises. Pace1PRM and Pace1PTM are intended for indoor

use only.

1. Pace1PRM installation:

a. Secure unit to desired mounting surface with a proper fastening device utilizing the unit’s

mounting hole (Fig. 2a, pg. 3). Unit should be mounted in proximity to ethernet

switch/network, NVR or video server.

b. Connect structured cable from ethernet midspan or endspan device to RJ45 jack marked

[PoE Input] (Fig. 2, pg. 3).

c. CAT5e or higher: Connect CAT5e or higher to connector marked [RJ45 OUT] (Fig. 2, pg. 3).

UTP: Connect single UTP to connector marked [UTP OUT] (Fig. 2, pg. 3).

2. Pace1PTM installation:

a. Secure unit to desired mounting surface with a proper fastening device utilizing the case’s

mounting hole (Fig. 2a, pg. 3). Unit should be mounted in proximity of camera/device.

b. Connect structured cable from IP camera/device to RJ45 jack marked [PoE Out] (Fig. 2, pg. 3).

c. CAT5e or higher: Connect CAT5e or higher to connector marked [RJ45 IN] (Fig. 2, pg. 3).

UTP: Connect UTP to connector marked [UTP IN].

Technical Specifications:

Parameter Description

Connections RJ45 for ethernet link or single pair UTP.

Input power

requirements

Midspan or endspan port connected.

PoE compliant to IEEE 802.3af (15W) and

PoE+ compliant to IEEE 802.3at (30W)

Indicators

Yellow (RJ45 connector): On - Link, Off - No Link, Blinking - Activity.

Green (RJ45 connector): On - 100Base-TX, Off - 10Base-T.

Green: PoE Active.

Environmental

Conditions

Operating Ambient Temperature: UL60950-1

Pace1PRM: -- -- 20ºC to 49ºC ( 4ºF to 120.2ºF).

Pace1PTM: For 15W: 40º to 75ºC ( 40º to 167ºF)-- --

For 25W: 40º to 70ºC ( 40º to 158ºF)-- --

For 30W: 40º to 60ºC ( 40º to 140ºF)-- --

Relative humidity: 20 to 85%, non-condensing.

Storage Temperature: 40º to 75ºC ( 40º to 167ºF)-- -- .

Operating Altitude: 304.8 to 2000m ( 1000 to 6,561.679 ft.).-- --

Regulatory

Compliance

UL/CUL Listed for Information Technology Equipment (UL 60950-1).

CE approved. C-Tick compliant.

Weights (approx.) Product: 3.88 oz. Shipping: 6.70 oz. (0.11 kg.), (0.19 kg.)

Pace1PRMT - 3 -

Structured

Cable to

Midspan/

Endspan

Green LED

indicates

PoE Present

from Midspan/

Endspan

Green LED

indicates

PoE being

transmitted

to Pace1PTM

CAT5 or higher

from Pace1PTM

Single UTP

from

Pace1PTM

Structured

Cable from

Camera/Device

Green LED

indicates

PoE transmitted

to Camera/Device

Green LED

indicates

PoE received

from Pace1PRM

CAT5 or higher

from Pace

receiver

Single UTP

from

Pace1PRM

*Note: Caution, once PoE connection is established between Pace1PRM and Pace1PTM, discon-

nection from Pace1PTM will not disable the PoE output voltage on the Pace1PRM, although the

Pace1PTM can be reconnected, caution should be taken not to connect the CAT5e or single UTP

wiring from Pace1PRM to any non-PoE device.

PoE compliant

100m max.

Mounting Hole

PoE Camera

Pace1PTMPace1PRM

I. E. 43KCT.

RJ45

Link

Z1409

UT P

Link

RJ45 LEDs llow - Act ivityYe

Green - Speed

Green LED Power and Po E

PoE

Out

Out put

PoE

LED

Input

PoE

LED

ww altronix.comw.

IP-UTP Transceiver

Passes PoE/PoE+

Pace1PTM - ansceiverTr

RJ45

Link

Out put

PoE

LED

Input

PoE

LED

UT P

Link

PoE

Input

I.T.E 43KC.

Z1409

RJ45 LEDs Yellow - Activity

Green - Speed

Green LED Power and PoE

www.altronix.com

IP-UTP Receiver

Pa Po Posses E/ E+

Pace1PRM - Receiver

Structured Cable

or Single UTP

Legend:

PoE+ over CAT5e up to 500m max.

Single UTP up to 152.4m max.

Po Wawered Switch or Net y MidSpan

Single PoE Camera Connection Utilizing Pace1PRM and Pace1PTM:

Fig. 2 Fig. 2a

Pace1PRM Pace1PTM

Fig. 1

Product specificaties

Merk:	Altronix
Categorie:	Netwerkkaart/adapter
Model:	Pace1PRMT
Kleur van het product:	Zwart
Gewicht:	180 g
Gewicht verpakking:	450 g
Gebruikershandleiding:	Ja
LED-indicatoren:	Status, Y
Land van herkomst:	Verenigde Staten
Aantal Ethernet LAN (RJ-45)-poorten:	2
Certificering:	CE
Inclusief netsnoer:	Ja
Aansluiting voor netstroomadapter:	Ja
Ethernet LAN, data-overdrachtsnelheden:	10, 100 Mbit/s
Netwerkstandaard:	IEEE 802.3af, IEEE 802.3at
Temperatuur bij opslag:	-40 - 75 °C
Bedrijfstemperatuur, bereik:	-4 - 120.2 °F
Ethernet interface type:	Fast Ethernet
Hoogte, in bedrijf:	-304 - 2000 m
Power over Ethernet (PoE):	Ja
Maximale afstand:	500 m
Afmetingen (B x D x H):	88.89 x 88.89 x 25.4 mm
Bedrijfstemperatuur (T-T):	-20 - 49 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 85 procent
Aantal producten inbegrepen:	2 stuk(s)
Ondersteundende kabel types:	Cat5e
Duplex systeem:	Volledig
Vermogen per poort Power over Ethernet (PoE):	30 W
Stroom via Ethernet (PoE):	- V