Alpine APF-X304DU Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Alpine APF-X304DU (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 266 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
INSTALLATION MANUAL
Steering wheel remote control interface for:
FIAT, CITROËN, PEUGEOT
Model: Ducato III 250/251 2006 – 2011
Ducato III 250/251 2011 – 2014
Ducato III 250/251/290 2014 – 2021
Jumper II 250/251/290 2006
Boxer II 250/251/290 2006
Kit content: SWRC CAN bus to UART interface with wiring
harness and ISO connector; antenna DIN
adapter; camera adapter, plastic socket
Compatibility: Compatible with several original radio systems
Suitable for: ALPINE Head Units with “CONNECT2 I/F” input
INSTALLATIO
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.
04/2022 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
1
A. Content and wiring harness connections
1 - to RADIO connectors
2 - to CAR connector
3 - to RADIO CONNECT2 I/F plug
4 - Green/White - SPEED output
(connect to the Alpine radio)
5 - POWER ANTENNA output
6 - CAMERA control/REMOTE out
7 - to optional/extra SERVICES:
Orange – Reverse output
Green/White – Speed output
8 - to external switch (Blue cable)
9 - CAN BUS connection access cable
10 - CAN BUS housing for cables
11 - ISO/DIN antenna adapter
12 - CAMERA input adapter
B. Additional accessories.
1. If the car is not equipped with
open dash and single DIN radio
frame, replace the radio dock
with the following original Fiat
spare part number: 735535319
2. If the car is not equipped with
ISO connector for radio, you
need the following Alpine part
number: KIT-DU-OEM.
7
2
3
4
5
0
9
1
!
6
8
@
2
5. Remove the connector from
the instrument panel.
1. Remove the two screws of the
instrument panel cover.
2. Lift the cover at the back first
3. Now remove the cover
completely from the
instrument cluster.
4. Establish a CAN bus connection
to the instrument cluster.
Laying the CAN cable from
radio connector to the back
side of instrument cluster.
C. Connect the CAN bus cable to vehicle (point 10 / page 2).
6. Release the locking clips of the
connector housing.
3


Product specificaties

Merk: Alpine
Categorie: Niet gecategoriseerd
Model: APF-X304DU

Heb je hulp nodig?

Als je hulp nodig hebt met Alpine APF-X304DU stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Alpine

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd