Allen & Heath ZEDi-10FX Handleiding

Allen & Heath Mengpaneel ZEDi-10FX

Lees hieronder de 📖 handleiding in het Nederlandse voor Allen & Heath ZEDi-10FX (12 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 86 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

ZEDi 10 / ZEDi 10FX - -

10 Channel Live + Recording Mixer User Guide

Thank you for purchasing this Allen & Heath ZEDi 10 or ZEDi 10FX!- -

We recommend that you read all of this user guide to get the best from your mixer and after

reading, please keep this safe for future reference.

Included in this package is:

 ZEDi 10 / ZEDi 10FX Mixer.- -

 IEC C5 Mains Power Cable. Please check correct mains plug is fitted for your country.

 USB A B Cable 2M.-

 This User Guide!

1. Get to know your mixer

1.1 MONO INPUT CHANNELS (M)

1. Mic Input Socket uses a standard 3 Pin XLR socket for connecting -

dynamic or condenser microphones.

2. Line / Inst Input Socket uses a standard 1/4” (6.25mm) Jack socket

for connecting balanced or unbalanced signals such as guitars and

other instruments.

3. Gain Control adjusts the gain of the input preamplifier to drive the

source signal level. Gain ranges from 5dB to 60dB.

4. Instrument Line / Inst input activates the circuit for electro-

acoustic and electric guitars, basses and other Direct Input

instruments. When activated the Mic Input Socket is disabled.

5. For channels M3 M4 and this is replaced by a LINE/PAD switch. This

activates the LINE input and a PAD Mic Input circuit which reduces the

Socket gain level by 20dB for very loud sources.-

6. lo-cut (Hi Pass Filter) is used for reducing Low Frequency noise such -

as handling noise, popping, rumble and proximity effect in microphone

signals.

7. HF EQ (High Frequency) equaliser affects treble frequencies in

the signal for adding “brightness” and “definition” or for reducing “hiss”

and “harshness”.

8. MF EQ (Mid Frequenc y) equaliser aff ects frequencies in the signal

for adding “presence” or for removing “boxiness”.

9. LF EQ (Low Frequency) equaliser affects bass frequenc ies in the

signal to cover “boom” and “sub bass” frequencies.-

10. AUX send controls the amount of si gnal sent from the channel to

the aux buss and AUX OUT MIX. The signal is sourced pre fader (-) so

is independent of the level being sent to the main L R Mix. -

There is a master level control for the .AUX OUT

11. FX send controls the amount of signal sent from the channel to

the FX buss and the . The signal is post fader ( ) which FX OUT -MIX

means it’s affected by the channel control so it stays in proportion MIX

to the signal going to the .MAIN MIX

There is no master level control for the .FX OUT

12. PAN adjusts signal from a mono input channel between the left

and right busses and subsequently the main outputs.

13. MIX rotary fader controls the amount of signal to the left and right

busses.

14. -Pre Fade Listen (PFL) switches the channel input signal to the

headphones for checking before adding it to Mix. The PFL signal is

taken after the but before the control. The EQ MIX LR Meters display

the channel input level when the PFL switch is activated.

1.2 STEREO INPUT CHANNELS (ST)

1. ST1 ST2 Inputsand use standard 1/4” (6.25mm) Jack

sockets for balanced or unbalanced line level stereo sources

such as professional keyboards, drum machines and other pro

audio equipment.

2. 2 -ST2 USB IN 1 includes from the ZEDi USB interface.

Plugging into the jacks will override the input from USB. Make

sure nothing is plugged into the jack sockets if you want to use

the for USB playback.ST-2

3. 4 -ST3 USB IN 3is from the ZEDi USB interface.

See section 3. for more information on the ZEDi USB

interface.

4. ST1 Gain Control ST1adjusts the input level to the channel.

There is no Gain Control for ST2.

5. HF LF EQ M1 M2 and are the same for as they are for & and

are set at the same frequencies. There is no EQ for .ST2

6. AUX send controls the amount of signal sent from the

channel to the aux buss and AUX OUT.

The signal is sourced pre fader ( ) so is independent of the -MIX

level being sent to the main L R Mix. -Unlike the FX bus, there is

a master level control for the Aux output.

7. FX send controls the amount of signal sent from the

channel to the FX buss and the . The signal is postFX OUT -

fader ( ) which means it’s affected by the channel MIX MIX

control so it stays in proportion to the signal going to the MAIN

MIX.

8. BAL adjusts the relative level between the left and right

stereo signals as they are sent to the left and right busses and

subsequently the main outputs. There is no BAL for .ST2

9. MIX rotary fader controls the amount of signal to the left

and right busses.

10. -Pre Fade Listen (PFL) switches the channel input signal to

the headphones for checking before adding it to Mix. The PFL

signal is taken after the but before the control. EQ MIX

The LR Meters PFL display the channel input level when is

activated.

Product specificaties

Merk:	Allen & Heath
Categorie:	Mengpaneel
Model:	ZEDi-10FX
Kleur van het product:	Zwart
Gewicht:	2300 g
Breedte:	332.9 mm
Diepte:	274.6 mm
Hoogte:	96.5 mm
Aan/uitschakelaar:	Ja
USB-poort:	Ja
Type aansluitplug:	6,3 mm
Inclusief AC-adapter:	Ja
Aantal USB 2.0-poorten:	1
Microfoon, line-in ingang:	Ja
Videomogelijkheid:	Nee
Meegeleverde software:	Cubase LE Software, \nCubasis LE App
Hoofdtelefoon uit:	Ja
AUX ingang:	Ja
Aantal kanalen:	10 kanalen
XLR out:	2
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	12 W
Aantal microfooningangen:	4
Spook power:	48 V
Booth out (RCA):	2