Allen & Heath AB168 Handleiding

Allen & Heath Staafmixer AB168

Lees hieronder de 📖 handleiding in het Nederlandse voor Allen & Heath AB168 (2 pagina's) in de categorie Staafmixer. Deze handleiding was nuttig voor 65 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

AB168 AP9588 issue 1

The is a portable, rugged audio interface AB168 box for the Allen & Heath GLD Qu digital mixing and

systems. It provides remote controlled mic/line preamps and 8 XLR line outputs. connects to the 16 It

mixer over a single Cat5 cable using the Allen & Heath dSNAKE protocol. A second AB168 can be

connected to the AB168 to expand the number of system inputs outputs. and

The AB168 is simply an audio interface. It cannot be used by itself. It must connect to the GLD or Qu

mixer which is where the audio is processed.

 The AB168 not compatible with Allen & Heath iLive Series components or ACE connection. is

Refer to the GLD User Guide AP8561 and Qu User Guide AP9372 for instructions on connecting and

using the AB168 with your system. Refer to the Allen & Heath web site for more information suitable and

Cat5 cables.

The AB168 can be operated horizontally with the connectors facing upward

or sideward, or vertically to save space on stage. It can also be mounted in

a 19” equipment rack or case using the optional kit. AB168-RK10

The diagrams below show two example applications.

Allen & Heath can provide the following CAT5e cables:

AH9650 100m drum of Etherex cable with Neutrik EtherCon locking connectors.

AH9651 20m Etherex cable with Neutrik EtherCon locking connectors.

AB168 AudioRack

GLD-80 +

2x AB168

32 inputs, 16

outputs on stage

Qu- + AB168 16

Access all 16

mic inputs on

stage

AB168 2 issue 1 AP9588

AB168 Panel Layout















 Input sockets 16 balanced XLR mic/line

inputs with +48V Phantom Power indicator. The

preamps are built into the AB168 their Gain, and

Pad and 48V phantom power are remote

controlled from the mixer via the dSNAKE link.

The outputs of the analogue preamps are

converted to digital format and transported via

dSNAKE to be processed and mixed at the GLD

or Qu mixer.

The sockets are numbered 1-16. On GLD, any

input can be patched to any channel at the

console. On Qu, sockets are mapped one- -one to

to input channels.

The Phantom Power indicator detects voltage at

the socket whether supplied by the AB168 or

received from an external source.



 Output sockets 8 balanced XLR outputs

operating at nominal +4dBu line level. Any signal

can be patched to any socket using the GLD I/O

screen or Qu Setup / Output Patch / dSNAKE

menu. The mixer defaults to a logical mapping of

these sockets to get you started.



 Space is provided next to the sockets for

custom labelling.







 dSNAKE port Cat5 cable link to connect to

the mixer or AR2412 rack. This carries the

inputs, outputs and the monitor sends to and

from the AB168 as well as preamp control and

system status. Maximum Cat5 cable length is

120m (396’) depending on cable type.

 We recommend using EtherCon locking

connectors to prevent damage to cables or ports.



 EXPANDER port Cat5 cable link to

connect a second AB168 rack to add further

mic/line inputs and XLR line outputs. It can also

be used to connect to the Allen & Heath ME

personal mixing system.



 Mains power input IEC connector and

fuse for the built-in universal voltage power

supply unit. This accepts worldwide voltages

from 100 to 240V AC 50/60Hz. Check that you

have received the correct mains lead for your

territory.

Secure the cable in place using the plastic P-clip.

Use a T20 Torx screwdriver to ret the screw.



 Vents Ensure good ventilation at the sides

and back the rack. Avoid obstruction of vents of

while operating. Avoid dirt or liquid ingress.

Note





 Read the Safety Instructions Sheet and information printed on the panel before operating.

 A limited one year manufacturer s warranty applies to this product the conditions of which can be found ’,

at: . www.allen-heath.com/legal

 By using this Allen & Heath product and the software within it you agree to be bound by the terms of the

relevant End User Licence Agreement (EULA), a copy of which can be found at: . www.allen-heath.com/legal

 Register your AB168 with Allen & Heath online at:

http://www.allen-heath.com/uk/support/Pages/ProductRegistration.aspx

















Product specificaties

Merk:	Allen & Heath
Categorie:	Staafmixer
Model:	AB168

Heb je hulp nodig?

Als je hulp nodig hebt met Allen & Heath AB168 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Staafmixer Allen & Heath

Allen & Heath M-DL-WAVES3 Handleiding

1 Augustus 2024

Allen & Heath ZED-36 Handleiding

9 Juli 2024

Allen & Heath ZED-28 Handleiding

9 Juli 2024

Allen & Heath DX 4 Handleiding

9 Juli 2024

Allen & Heath dLive GPIO Handleiding

25 Maart 2024

Allen & Heath DX88-P Handleiding

15 November 2023

Allen & Heath iDR-4 Handleiding

27 Maart 2023

Allen & Heath AB168 Handleiding

5 December 2022

Handleiding Staafmixer

Nieuwste handleidingen voor Staafmixer

Oster FPSTSM3711 Handleiding

20 December 2024

Oster FPSTHS3610 Handleiding

20 December 2024

Oster FPSTHB2615W Handleiding

20 December 2024

Girmi MX03 Handleiding

17 December 2024

Girmi MX17 Handleiding

17 December 2024

Girmi MX39 Handleiding

17 December 2024

Behringer XENYX 1003B Handleiding

14 December 2024

Taurus Robot 750 Pink Edition Handleiding

11 December 2024

Ambiano GT-SB-08 Handleiding

10 December 2024

Pyrex SB-1110 Handleiding

9 December 2024