AJH Synth MiniMod VCA Handleiding

AJH Synth Niet gecategoriseerd MiniMod VCA

Lees hieronder de 📖 handleiding in het Nederlandse voor AJH Synth MiniMod VCA (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 138 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

VCA User Guide

Thank you for purchasing the AJH Synth MiniMod VCA module, which like all AJH Synth Modules,

has been designed and handbuilt in the UK from the very highest quality components. We hope

that it will help and inspire you towards creating some great music and soundscapes!

The MiniMod Discrete Cascaded VCA exactly re-creates the VCA circuitry of the vintage Model D

synthesiser in Eurorack modular format. It features two fully discrete transistor VCA cores which

are hardwired in series, to which we have added full voltage control to both VCA cores along with

an overdrive facility. Particular attention has been paid to the selection and matching of compo-

nents in the audio signal path, including the use of audiophile grade capacitors and operational

ampliers.

There are two Audio Inputs, each with their own level controls along with two CV inputs which

control the gain of VCA 1 and a Master CV Input and level control which controls the gain of VCA

2. An oset control allows a preset gain to be added to VCA 1. Internally it operates at the same

voltage and signal levels as the early Model D voltage controlled amplier and the output of VCA

1 is hardwired to the input of VCA 2.

A high gain (overdrive) mode can be selected with an onboard jumper. This overdrives the Input

of VCA 1 by a factor of 3 and forces it into soft clipping - the second VCA can be used in a similar

way to the Master volume on a guitar amplier to control levels so that variable levels of distor-

tion (or "grit") can be added to the sound and still maintain unity gain overall.

Module width is 10 HP of Eurorack space and it is compatible with standard Eurorack cases. The

height of the panel is 128.5mm and depth is 26mm . There are four mounting holes at the corners

of the module and we provide 4 of M3 rack xing screws, along with a Eurorack compatible

power cable. Current consumption is 40mA from the +12V supply rail and 22mA from the -12V

supply rail.

All AJHSynth modules are covered by a one year guarantee against manufacturing defects.

Note:

It is very important that the power supply ribbon cable is connected correctly, see the “adjustment and

calibration” section for an illustration of the correct orientation.

Discrete Transistor Cascaded VCA

www.ajhsynth.com

mod

DISCRETE CASCADED VCA

MASTER

CV 2

OUT

CV 2CV 1

AUDIO 1

AUDIO 2

AUDIO 2AUDIO 1

MASTER

OFFSET

mod

CV 1

2 8

4 6

010

2 8

4 6

010

2 8

4 6

010

2 8

4 6

010

2 8

4 6

010

2 8

4 6

010

11 Master (VCA 2) Level

1 Audio Input 1

5 CV Input 1

6 CV Input 2

VCA 1 Oset 9

Audio Level 1 3

Audio Level 2 4

Audio Input 2 2

Audio Output 12

Master CV Input 10

1 Audio Input 1 : Audio Input 1 forms part of a 2 input audio mixer which is attached to the front end of

VCA 1, this input is mixed with Input 2 at a level set by Audio 1 Level Control (3). Signal

levels of up to +/- 5 Volts are acceptable.

Note:

Just like the VCA on the vintage Model D synthesiser on which this module is based, the

input stage is AC coupled - therefore it is not possible to process DC control voltages

through the Audio Inputs - it is suitable for processing audio signals only. However, if DC

control voltages are accidentally connected to the Audio Inputs it will not cause any

damage to the module.

2 Audio Input 2 : Audio Input 2 forms part of a 2 Input audio mixer which is attached to the front end of

VCA 1. This input is mixed with Input 1 at a level set by Audio 2 Level Control (4). Signal

levels of up to +/- 5 Volts are acceptable. Should more Audio inputs be needed a

Eurorack compatible audio mixer can be connected to either Audio Input 1 or 2.

3 Audio Level 1 : Sets the amount of signal from Audio Input 1 (between 0% and 100%) that is mixed with

Audio Input 2 and sent to the Input of VCA 1.

4 Audio Level 2 : Sets the amount of signal from Audio Input 2 (between 0% and 100%) that is mixed with

Audio Input 1 and sent to the input of VCA 1.

5 CV Input 1 : Control voltage Input for VCA 1, this is mixed with CV Input 2 (6) and the sum of these

voltages control the gain of VCA 1. An input voltage range of +/-5 V is acceptable and +5V

gives approximately unity gain. Negative voltages will generally be ignored unless

combined with a (larger level) positive voltage from CV Level 2 control, in which case the

resulting voltage will be (CV2 - CV1). The output of both VCA 1 and VCA 2 repond in a

linear manner in relation to all CV inputs.

Controls, Inputs and Outputs

7 CV Level 1

8 CV Level 2

6 CV Input 2 : Works in the same fashion as CV Input 1. Any voltage applied to this Input is attenuated

by CV 2 Level control (8) and summed with CV 1 Level output voltage, the resultant

control voltage regulates the gain of VCA 1 between zero and unity.

Note that CV 1 & CV2 act on VCA 1 ONLY, see signal ow diagram below.

7 CV Level 1: Sets the amount of control voltage (between 0% and 100%) sent from CV Input 1 (5) to

regulate the gain of VCA 1

8 CV Level 2 : Sets the amount of control voltage (between 0% and 100%) sent from CV Input 2 (6) to

regulate the gain of VCA 1

9 VCA 1 Oset : Sets the initial gain of VCA 1 by applying a control voltage directly to the CV input node,

so that it eectively acts as a manual volume control for the VCA . See the signal ow

chart below for a visual indication of function.

12 Audio Output : Audio output. The output signal level is typically +/- 5V but can be much higher (up to

+/-11v) if the Gain Jumper (J1) is removed, so it is important that the output level is

controlled with the Master Level Control (10) to prevent overloading modules which are

connected downstream.

Removing this Jumper boosts the level of signal fed to the input of VCA 1 by almost

300%. This overdrives the VCA core and creates up to 20% of tube-like harmonic distor-

tion. With the Gain Jumper removed care must be taken to adjust the Master Level

control to reduce the gain of VCA 2 by a corresponding amount and keep the output

level around +/-5V to prevent possible damage to other modules downstream of this

module.

10 Master CV Input : A voltage applied to this input varies the gain of VCA 2. When no jack is connected the

switch contact of the jack socket is connected (normalised) to +10V and the gain of the

VCA can be manually controlled by the Master Level control (10). This emulates the

“Pedal” control and Input of the Model D, but with a greater gain range. Control voltages

up to +10V can be connected to this Input.

11 Master Level : Controls the CV voltage level to VCA 2. If no jack is connected to Master CV Input (9) then

a setting of 5 (12 o’clock) will give unity gain for VCA 2. If VCA 1 is being over driven by

removing J1 (C) then this can be turned down so that unity gain from the VCA Output is

maintained, in a similar fashion to the Master volume control on a guitar amplier.

If a CV signal is fed into Master CV Input (9) then this controls the level of this signal fed to

the VCA gain cell between 0% (no audio output) and 100% (Unity gain with +/-5V audio

input).

VCA 2VCA 1

Audio Input 1

Audio Output

CV IN. 1

Level

CV IN. 2

Audio Level 1

MiniMod Cascaded VCA

Gain Jumper

Master Input Jack

Normalled to

+10V Internally

Master CV Input

+10V

+5V

Master

Level

Audio Level 2 CV Oset

Audio Input 2

Audio and CV Signal Flow Chart

C Gain Jumper :

(J1 on PCB)

Product specificaties

Merk:	AJH Synth
Categorie:	Niet gecategoriseerd
Model:	MiniMod VCA

Heb je hulp nodig?

Als je hulp nodig hebt met AJH Synth MiniMod VCA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd AJH Synth

AJH Synth MiniMod VCA Handleiding

1 Juli 2023

AJH Synth MiniMod VCF Handleiding

22 Juni 2023

AJH Synth MiniMod VCO Handleiding

21 Juni 2023

AJH Synth Dual Contour Handleiding

19 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Vitec MGW Diamond-HX OG Handleiding

23 November 2024

Electrolux STA9 Handleiding

23 November 2024

Electrolux UMP3 Handleiding

23 November 2024

Electrolux ZS70GL Handleiding

23 November 2024

Bosch HEZ8TK36UC Handleiding

23 November 2024

Bosch HEZ8ZZ36UC Handleiding

23 November 2024

Bosch HDZIT301 Handleiding

23 November 2024

Bosch HEZBS301 Handleiding

23 November 2024

LG LX-330 Handleiding

23 November 2024

Stamos S-PLASMA 60U Handleiding

23 November 2024