Aguilar Tone Hammer 700 Handleiding

Aguilar Niet gecategoriseerd Tone Hammer 700

Lees hieronder de 📖 handleiding in het Nederlandse voor Aguilar Tone Hammer 700 (26 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/26
Page 1
English
Thank you for purchasing the Tone Hammer® 700
amplier!
Incorporating the preamp from the popular Tone
Hammer® preamp/DI pedal this superlight bass head
combines three bands of flexible EQ, a colorful “Drive”
control, and watts of power in a 4 lb. (2.22 kg.) 700 .9
package. The Tone Hammer® 700 will give you the
legendary“Aguilar Sound” while still fitting into the
accessory pouch of most gig bags the perfect choice –
for bass players on the go. This solid state amplier
provides 700 watts at either 4 or 2.67 ohms, continuous
boasts an incredibly flexible EQ section, and also
features a series eects loop, XLR balanced output, and
two rear panel speakon outputs.
Table of Contents
I. Important Safety Instructions page 2
II. Getting Started page 3
A. Manual Conventions
B. Basic Setup
C. Protection Features
III. Features and Functions page 4
A. Front Panel
B. Rear Panel
IV. Warranty Information page 6
V. Environmental Protection page 6
Page 2
I. Important Safety Instructions
WARNING: To reduce the risk of re or electric shock, do not expose
equipment to rain or moisture. Aguilar Amplication assumes no
responsibility for any damage or injury that results from improper
use or service.
CAUTION: RISK OF ELECTRIC SHOCK! DO NOT OPEN! There are no user
serviceable parts inside of this product. This is a high voltage
device, and internal voltages can be lethal. Any and all work
should be performed by qualied personnel only.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
14. Vents are provided for heat dissipation on the sides, and at the rear of the amplier.
Maintain at least a 2” (5cm) space around these vents to provide sufficient
ventilation.
15. Make sure that the power cord is intact before plugging it into the unit. Do not use a
cord with visible damage to its insulation, or connectors.
16. The equipment shall be connected to a MAINS socket outlet with a protective
earthing connection. This is a Class I device, equipped with a safety feature that
requires the use of the three-pin grounding power plug.
17. Use only accessories listed in this manual, or in other way specied by the
manufacturer.
18. Do not install this amplier on carts or other moving objects.
19. Where the MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable. To completely disconnect the
equipment from the AC mains, remove the power cord from the AC receptacle.
20. Do not use this device with wall/ceiling mounts not specied by the manufacturer.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that
may cause undesirable operation.

Product specificaties

Merk: Aguilar
Categorie: Niet gecategoriseerd
Model: Tone Hammer 700

Heb je hulp nodig?

Als je hulp nodig hebt met Aguilar Tone Hammer 700 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Aguilar

Aguilar

Aguilar Grape Phaser II Handleiding

18 November 2024
Aguilar

Aguilar Filter Twin II Handleiding

28 Mei 2024
Aguilar

Aguilar Tone Hammer Handleiding

18 Mei 2024
Aguilar

Aguilar Chorusaurus Handleiding

17 Mei 2024
Aguilar

Aguilar DB 599 Handleiding

17 Mei 2024
Aguilar

Aguilar DB 925 Handleiding

17 Mei 2024
Aguilar

Aguilar Filter Twin Handleiding

12 Augustus 2023
Aguilar

Aguilar DB 751 Handleiding

12 Augustus 2023
Aguilar

Aguilar Tone Hammer 700 Handleiding

12 Augustus 2023
Aguilar

Aguilar Agro Handleiding

12 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Cecotec

Cecotec ReadyWarm 2050 Max Dual Handleiding

18 November 2024
Cecotec

Cecotec Toastin' time 850 Handleiding

18 November 2024
Coors Light

Coors Light CLVIC13 Handleiding

18 November 2024
Cecotec

Cecotec Ready Warm 2500 Thermal Connected Handleiding

18 November 2024
Cecotec

Cecotec Ready Warm 1800 Thermal Connected Handleiding

18 November 2024
OSD Audio

OSD Audio Black R10 Handleiding

18 November 2024
OSD Audio

OSD Audio Black S82 MK2 Handleiding

18 November 2024
Arco

Arco AH-AHB Handleiding

18 November 2024
Corberó

Corberó CEMIPROG1800 Handleiding

18 November 2024
Corberó

Corberó CEMIPROG1500 Handleiding

18 November 2024