Aerohive AP370 Handleiding

Aerohive Access point AP370

Lees hieronder de 📖 handleiding in het Nederlandse voor Aerohive AP370 (6 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

A P S MEROHIVE LENUM AND USPENDED OUNT

I INSTALLATION NSTRUCTIONS

This document describes how to install Aerohive APs using the following mounting systems:

• : This section explains how to mount an AP in the plenum "Plenum and Mount Installation" on page 1

above a dropped ceiling.

• : This section explains how to suspend an AP from a beam, "Suspended Mount Installation" on page 4

post, strut, girder, or any object that can support its weight:

• AP121 - 11.6 oz (0.36 kg)

• AP141 - 13.5 oz (0.42 kg)

• AP230 - 1.6 lb (0.73 kg)

• AP330 - 1.5 lb (0.68 kg)

• AP350 - 2.38 lb (1.08 kg)

• AP370 - 11.6 oz (0.36 kg)

• AP390 - 13.5 oz (0.42 kg)

For the latest product documentation, compliance information, and software updates, visit

www.aerohive.com/support.

P M ILENUM AND OUNT NSTALLATION

Use the plenum mount kit (AH-ACC-BKT-PLENUM-300-100-KIT) to mount the AP models listed above in the

plenum space above a dropped ceiling grid.

Plenum Mount Kit Contents

The plenum mount kit includes the following items:

• Plenum bracket for AP121, AP141, AP330, and AP350 models

• Plenum bracket for AP230, AP370 and AP390 models

• Hanger clip

• Hanger frame

You may need a pair of pliers to pinch the hanger clip into the mounting bracket.

Use the instructions and illustrations on the following pages to install an AP using the plenum mount kit.

Aerohive Plenum and Suspended Mount Installation Instructions

1. Insert the hanger clip into the center hole of the mounting bracket and squeeze it until the clip tabs pop

upward through the smaller holes on either side.

2. Attach the bracket and clip assembly to your AP. The following illustrations show how to do this for

AP121, AP141, AP330, and AP350 models, and for AP230, AP370 and AP390 models.

3. Install external antennas if necessary.

Hanger clip

Tab

Hanger clip

Tab

Hanger clip

AP121, AP141, AP330, and AP350 bracket AP230, AP370 and AP390 bracket

Insert the hanger clip into the center hole in the bracket. Squeeze the clip together

until the tabs snap up into the holes on either side of the center hole.

Tab slot

Tab slot V-shaped tab V-shaped tab

AP Mounting bracket

Attach the bracket and clip assembly to the back of the AP by inserting the V-shaped bracket tabs

into the tab slots on the AP. Make sure the bracket clicks securely into place.

AP121, AP141, AP330, and AP350 models

ClickClick

Bracket

tab

Diagonal

mount clip

and tab

Diagonal

mount clip

and tab

Square

mount clip

and tab

Square

mount clip

and tab

Built-in mounting hardware Diagonal mount Square mount

Attach the bracket and clip assembly to the back of the AP in either a diagonal or square

position using the built-in mounting hardware on the AP. Slide the opposite edges of the bracket

tabs under the mount tabs and rotate the bracket until it clicks into place.

Mounting

bracket

AP230, AP370 and AP390 models (AP370 shown here)

Click

Aerohive Plenum and Suspended Mount Installation Instructions

4. Install the hanger frame into the ceiling plenum as shown in the following illustration.

5. Attach AP and mounting plate to the hanger frame as shown in the following illustration, which shows an

AP121. This step is identical for all models.

6. Connect an Ethernet cable to the network, and—if not using PoE—connect the power cord to a power

source. Replace the ceiling tiles to complete the installation.

Click

Hanger frame

Click

Remove the ceiling tile to access the plenum.

Press the hanger frame onto the ceiling track until

it clicks into place.

(Bird’s eye view wth ceiling tiles

and track removed for clarity)

Hanger frame

AP with bracket

assembly attached

Insert the hanger clip up through the

center slot in the hanger frame.

Rotate the AP and the attached mounting

plate counterclockwise until the clip

locks in place against the sides of the

crossbar.

Product specificaties

Merk:	Aerohive
Categorie:	Access point
Model:	AP370
Kleur van het product:	Wit
Gewicht:	0.68 g
Breedte:	195.07 mm
Diepte:	195.07 mm
Hoogte:	55.88 mm
Plaatsing:	Ceiling, Table, Wall
Aantal USB 2.0-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	3
Aansluiting voor netstroomadapter:	Ja
Modulatie:	256-QAM, DSSS, OFDM
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE 802.3at
Ondersteunde beveiligingsalgoritmen:	802.1x RADIUS, TKIP, WEP, WPA, WPA2
Antennas quantity:	3
Intern:	Nee
Draadloos LAN data-overdrachtsnelheid (max):	1300 Mbit/s
Output current:	2 A
Spanning:	12 V
Maximale overdrachtssnelheid van gegevens:	1300 Mbit/s
2,4 GHz:	Ja
5 GHz:	Ja
Power over Ethernet (PoE):	Ja
Antennefuncties:	Ingebouwde antenne
AC-ingangsspanning:	100 - 240 V
Bedrijfstemperatuur (T-T):	-20 - 70 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 40 procent
Spread spectrum methode:	DSSS