AceSee IMX222-DM368 Handleiding

AceSee Beveiliging IMX222-DM368

Lees hieronder de 📖 handleiding in het Nederlandse voor AceSee IMX222-DM368 (2 pagina's) in de categorie Beveiliging. Deze handleiding was nuttig voor 74 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

4 Parameter Description

2 Product Notes

1 Unpacking Inspection

｜Accessories list

1. Once receive the product, the user should open the

outer packing box to check the appearance for obvious

damage.

2. Please referring to the following list to check whether

the accessories are complete.

｜ External camera structure diagram

3 Main Features

5 Camera Structure

Accessory name Number

IP camera 1

CD（users guide） 1

Quick Operation Guide 1

Thank you for buying our IP camera, please read

the following instructions carefully to learn the

related operation.

1. Before using the camera，please read this

guide book carefully and make sure the power

supply is normal.

2. Users should follow the manufacturer's instruc-

tions to install device professionally and must

not dismantle the equipment without permission.

3. To prevent the sensor pull light phenomenon,

prohibit putting the lens under bright light for a

long time.

4. If the lens is dirty or foggy, please use a dry soft

cloth to clean it.

5. The equipment must not be installed under the

air door of air conditioner , otherwise the lens

will become blurry and condenses into moisture.

6. When install, repair or clean the equipment,

please make sure the power has been turned

off.

7. Stay away from high temperature and heat

source environment, pay attention to ventilation.

8. To avoid damage and electrical shock, non-

professionals are forbidden to dismantle the

equipment.

9. Prohibit putting this equipment to work in strong

magnetic field and laser beam environment.

10. If there is lightning during installation, please

take grounding lightning protection measures.

11. Damages to the machine and all other

economic losses caused by human are at

your own risk.

Mind you respected user, important

operations and maintenance (repair)

guide are described in the attached

product instruction.

Mind you respected user, uninsulated

"dangerous voltage" exists, please be

aware of electric shock.

Reminders:

• Power supply must pass safety certification ,Its

output voltage, current, voltage polarity and oper-

ating temper ature must match requirement of this

equipment.

• Please install lightning protection devices or cut off

the power in thunder and lightning conditions.

• To capture high-quality video and pictures, please

make sure the network connection is stable and

smooth.

1. Ultra-low illumination and high-performance real-time

screen, support ABLC image effect.

2. Support WEB configuration, and IE network Monitoring

3. Support dual-stream.

4. Support OSD, color, brightness, saturation and digital

zoom settings settings.

5. Support real-time video transmission, video motion

detection and privacy masking.

6. Support remote monitoring, ONVIF2.4 protocol and

IR-CUT switch.

7. Support P2P network platform.

Illustration

The following structure diagram is used as an example

for the different appearances of different models.

Sequence NO. Interface Functional description

1 Power connector 12V DC input power

2 Network interface Network data transmission

3 Power connector（for

stand-by power） 12V DC input power

4 Network interface Network data transmission ,

12V DC input power

1. Input interface

2. Device connection

HD IP CAMERA

Quick Operation Guide

Thank you for using our product, please read this manual

carefully before use.

Please refer to the complete User manual for more information

from the CD.

Type1

Type2

IMX222+DM368

Name IMX222+DM368

Description TI 2MP IP camera

Sensor type 1/2.8" 2.43 Megapixel CMOS Image sensor.

Minimum Illumination 0.5 Lux

S/N Ratio ˃50db

Shutter 1—1/10000s(adjustable)

Lens 2.8mm/3.6mm/4mm/6mm/8mm/2.8-12mm

(adjustable),Lens optional

Lens interface type C/CS

Day/Night ICR-infrared filter

Video Compression H.264/JPEG

Bit Rate 64-12000Kbps

Max image size 1920×1080

Frame Rate 50Hz:25fps(1920×1080)

60Hz:30fps(1920×1080)

Image setting Brightness, contrast, saturation, sharpness

can be adjusted

Backlight Compensation Support

Storage function FTP、Local、NVR、SMTP

Onvif Onvif 2.4

Intelligent alarm Motion detection、Privacy

Protocol TCP/IP、HTTP、DHCP、FTP、DNS、

DDNS、RTSP、NTP、SMTP

General function Single/Dual/Tri-Stream/Mirror

Communication inter-

face RJ45（10M/100M）Adaptive Ethernet port

Temperature -20℃～55℃

Humidity 0%-90%RH Without Condensation

Power DC12V±5% / PoE(802.3af)

Size 38×38mm

2. Enter URL : http://192.168.1.168

6 Quick Configuration Tool

7 IE Connection

1.Install Client Software

Find out the document“IP Search.exe”,

make a copy in the computer and double

click to open it.

As shown in the picture:

2. Change the Camera’s IP Settings

Make sure IP camera is connected, and

click Search to search the IP camera, find

it, click it, and then change the IP settings.

Finally, click Modify IP to confirm the change.

As shown in the picture:

9 Mobile Client Connection

8 Computer Client Connection

1. Install Mobile Monitoring Software

Enter URL on your phone: www.danale.com,

download and install mobile monitoring software

“Danale”.

2. Add Device

Click “Add Device ”, enter device name, serial number

and password (You can directly scan the QR code to

get the device serial number ).

2 3

※ Search to add device: Configuration Management→Device

Management→ Add Device→ Online Searching→ Query

→ Select Device

1. Install Computer Client Software CMS

Find out the document “HeroSpeedCMS.exe”,

make a copy in your computer and double click to

install it .

2.Search Add Device

Click “Search Device” to search for device in LAN,

or add device manually.

2 3

※ Add device manually: Configuration→Device Management

→Add Manually

3. Install control

An OCX control is needed in your computer for

the first IP camera installation, click the pop up

tip "OK" and install OCX control.

As shown in the picture:

4. User login

Refresh the website and enter correct user name

and password.

Both the default user name and password are

admin.

1.Browser settings

Open your IE browser ，Click Tool→ Internet Op-

tion→ Security→ Customized Level→ Active X

Control and Plug-in, select all "Enable".

Product specificaties

Merk:	AceSee
Categorie:	Beveiliging
Model:	IMX222-DM368

Heb je hulp nodig?

Als je hulp nodig hebt met AceSee IMX222-DM368 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Beveiliging AceSee

AceSee AS-0810 Handleiding

19 Augustus 2022

AceSee IMX222-HI3516C Handleiding

19 Augustus 2022

AceSee IMX238-HI3518C Handleiding

19 Augustus 2022

AceSee IMX222-A5S66 Handleiding

19 Augustus 2022

AceSee IMX222-DM368 Handleiding

19 Augustus 2022

AceSee AR0130-DM365 Handleiding

19 Augustus 2022

AceSee 1690 DVR Handleiding

19 Augustus 2022

Handleiding Beveiliging

Nieuwste handleidingen voor Beveiliging

Geemarc SOS-PRO 295 Handleiding

6 Maart 2024

Technaxx TX-106 Handleiding

4 Februari 2024

One2track Safety Angel Handleiding

16 Oktober 2023

Sygonix SY-3851632 Handleiding

16 Oktober 2023

Sygonix 1326052 Handleiding

16 Oktober 2023

Sygonix 43588A WLAN Camera Handleiding

16 Oktober 2023

Sygonix 43176S LAN Camera Handleiding

16 Oktober 2023

Sygonix SY-3181234 Handleiding

16 Oktober 2023

Sygonix Touch IP65 Handleiding

16 Oktober 2023

Sygonix 1882082 Handleiding

16 Oktober 2023