Accell UltraAV K072C-012B Handleiding

Accell Receiver UltraAV K072C-012B

Lees hieronder de 📖 handleiding in het Nederlandse voor Accell UltraAV K072C-012B (2 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

READ ME FIRST – SETUP INSTRUCTIONS

Thank you for purchasing the Accell UltraAV HDMI Distribution

Ampliﬁ er. This product is designed to provide an exceptional

performance and value. Please review the manual before

operating and retain for future reference.

- CAUTION -

1. Ensure the unit has sufﬁ cient

ventilation. Do not cover

ventilation openings. Do not install

in a conﬁ ned space.

2. Do not operate near source

of heat. Do not stack on to p,

underneath or between other heat

generating unit/s including other

ampliﬁ ers.

3. Unplug power adapter if not

used for an extended period.

4. To prevent damage from power

surges, the unit should be plugged

into a surge protector or surge pro-

tected power source.

5. Do not use near liquid or areas

of heavy moisture.

6. Clean unit with a clean and dry

cloth only.

7. This unit cannot be serviced in

the ﬁ eld. Contact Accell if service is

required.

8. Do not open case, risk of shock -

shock hazard.

9. Do not modify power cord or use

the product if the power cord is

damaged.

Introduction

The UltraAV HDMI Matrix and Distribution Amplifier accepts signala from

multiple HDMI enabled audio/video sources and distributes the signal

to up to 2 (4x2 Matrix) or 4 (2x4) HDMI enabled displays. The matrix

can be configured to send any input to a HDMI displays, monitors, ny

projectors or TV’s.

Over-Current and Over-Voltage Protection

The circuit boards are equipped with both oltage over-current and over-v

protection and will automatically power down if encountered. The circuit

boards will restore automatically once the excessive current or voltage

has passed.

Package Contents

●HDMI Distribution Amplifier (Matrix) ●Power Adapter

●Remote Control (with battery) ●Owner’s Manual

2x4 HDMI Distribution Amplifier and Matrix

Model: K072C-011B

Speciﬁ cations

● Independently access 2 HDMI Sources from 4 HDMI Displays

● Supports HD resolutions up to 1080P and 3D

● HDMI 1.4a, HDCP 1.2 compliant

● Input video signal: 5v p-p, Input DDC signal: 5v p-p (TTL)

● Data transfer speed of 6.75Gbps (2.25Gbps/channel)

● Deep color up to 36-bit

● Audio formats supported: S-HD 7.1, Dolby TDT rue-HD 7.1

● Maximum input cable length: Up to 20m (24AWG)

● Maximum output cable length: Up to 20m (24AWG)

● Shelf or surface mountable

● 5V DC, UL Listed power adapter

● Approximate dimensions: 10.9”W x 1.1”H x 6.1”D

277W x 28H x 156D mm

● Operating temperature range: 5 to 131°F (-15 to 55°C)

● Operating humidity range: 5% to 90% RH (no condensation)

Model Numbers:

K072C-011B (2x4)

K072C-012B (4x2)

UltraAV

HDMI Matrix and

Distribution Amplifier

4x2 HDMI Distribution Amplifier and Matrix

Model: K072C-012B

Speciﬁ cations

● Independently access 4 HDMI Sources from 2 HDMI Displays

● Supports HD resolutions up to 1080P and 3D

● HDMI 1.4a, HDCP 1.2 compliant

● Input video signal: 5v p-p, Input DDC signal: 5v p-p (TTL)

● Data transfer speed of 6.75Gbps (2.25Gbps/channel)

● Audio formats supported: S-HD 7.1, Dolby TDT rue-HD 7.1

● Deep color up to 36-bit

● Maximum input cable length: Up to 20m (24AWG)

● Maximum output cable length: Up to 20m (24AWG)

● Rack shelf or surface mountable

● 5V DC, UL Listed power adapter

● Approximate dimensions: 10.9”W x 1.1”H x 6.1”D

(277W x 28H x 156D mm) 5 to 131°F (-15 to 55°C)

● Operating temperature range: 5 to 131°F (-15 to 55°C)

● Operating humidity range: 5% to 90% RH (no condensation)

The 4x2 matix features analog stereo outputs and a TOSLINK fiber

optical digital audio output. Only one output is functional at any given

time. The primary output is the TOSLINK output. Connect an audio

output to your audio receiver.

The audio output provides audio from source device used by Output 1. If

Output 1 is switched to Input 3, the audio from Input 3 will be provided.

4x2 HDMI Distribution Amplifier and Matrix

Audio Output

Setup

With the matrix power switch in the OFF position, connect an HDMI High

Speed cable from the HDMI Output of the most commonly used audio/

video source to the HDMI Input 1 located on the rear of the matrix.

Similarly, connect the remaining source devices to the HDMI Input rts Po

on the matrix.

Tips: Use the shortest length HDMI cables possible in each point

in the installation. Use only High Quality and High Speed HDMI

cables.

Next, connect an HDMI cable to the HDMI Output Port 1 on the rear of

the matrix. Connect the other end to the HDMI Input Port of the displ ay

device. Similarly, connect the remaining HDMI Output Ports from the

matrix to the other displays.

The matrix has internal memory that stores the system

information for faster switching. Please follow the steps in the

order listed: Turn ON the displays and ensure they are awake (not in

standby mode). Check the displa ys INPUT setting to ensure the correct

HDMI port is active.

Turn on the source devices and ensure they are awake (not in standby

mode). Connect the power adapter to the matrix. Plug the power

adapter into a surge protected AC power outlet. Turn the matrix power

switch to the ON position.

The matrix has a low power draw and is intended to be left on. If

the matrix is turned off, start up the system as noted above. If new

hardware is added, please perform a RESET.

To RESET the matrix, turn off the display and source devices. Power off

the matrix and unplug the power adapter from the rear of the matrix.

Wait 20 minutes for the memory of the system configuration inside of

the matrix to be deleted. llow the setup instructions above to correctly Fo

initiate the setup.

Infrared Control (IR)

The Ultra-IR Adapter Kit (optional) enables the user to control the source

device from the location of the display. The HDMI cable, at the display

end, plugs into the IR Adapter. Next the adapter HDMI connector plugs ’s

into the display. The adapter has a port that accepts an optional IR

receiver (IR-RX). When the IR-RX receives an IR signal from the remote

control, it uses the HDMI cable’s CEC line to send the signal to the switch.

The switch has an IR port that accepts the optional IR transmitter (IR-

TX). The IR-TX sends the signal to the source device.

Note: As the Ultra IR-Adapter uses the CEC channel of the HDMI cable,

the CEC function cannot be used when using this device. rn off CEC or Tu

HDMI Link functionality in the source devices and displays.

Ultra-IR Adapter Kit: PN: B164B-001B

Includes IR-Adapter: 1 pc.

IR ansmitter (5 ft.): 1 pc.Tr

Dual Frequency: 38KHZ-60KHZ

IR Receiver (5 ft.): 1 pc.

Ultra-IR ceiver andRe

Transmitter Pin assignment

Ultra-IR ansmitter (5 ft.)Tr

Dual Frequency: 38KHZ-60KHZ

PN: B164B-003B

Troubleshooting

A. One of the displ does not show a picture or output audiay o.

Q. Check the displays input setting to ensure it is set to receive a signal

from the connected HDMI port.

Q. One or more of the connected displays will not display a picture while

one or more of the displa ys do display a picture:

A1. Turn off the power to the matrix, source and displays. it 1 minute. Wa

Turn the source on. Turn the displays on. Turn the matrix on.

A2. The HDMI cables on the non-functonal display/s cannot support

their long length. Use only high-quality High Speed HDMI cables. Keep

the cable length as short as possible. Test by locating the non-working

display close to the matrix. Use a short HDMI cable to connect the matrix

to the TV. A working TV using a short HDMI cable indicates an issue with

the HDMI cable.

Ultra-IR ceiver (5 ft.)Re

Dual Frequency: 38KHZ-60KHZ

PN: B164B-002B

...troubleshooting continued

Q. Get the message “This protocol is not supported” or other error

message.

A. See answer A1 abo .ve and repeat the steps outlined

Q. The matrix is not down sampling the video and some of the TV’s are

not displaying a picture.

A1. Go into the TV’s setup and configure the resolution to match all the

connected TV’s. The TV’s should share the same resolution.

A2. In the source devices menu options set the source device to output a

resolution that matches all the connected displays.

Q. My TV resolution are not optimized.’s

A. The matrix will query the displays and provide the highest common

video resolution amongst them. Example: Using a 1080p source, if 3

of the displays support a maximum resolution of 1080p and 1 displ ay

supports a maximim resolution of 720p ate at a , all 4 display will oper

resolution of 720p. If the 720p TV in the example is then turned of f,

the other 3 displays can then operate in 1080p resolution. Turn Off then

turn On the matrix to refresh the configuration. The three 1080p TV’s will

refresh (flicker) then each will displ a 1080p resolution picture.ay

A SSISTANCE: Questions regarding this product or its product

warranty, please check out our b site at: www.accellcables.com. We

Customer service can be reached by email at support@accellcables.com

or phone at 510-438-9288, toll free 877-353-0772 (M-F 9am-5pm PST).

1-YEAR MANUFACTURERS WARRANTY

The Accell UltraAV Matrix is warranted for one year from date of

purchase to be free of defects in material and workmanship. In the event

of such defects, the Accell product will be repaired without charge or

replaced with a new one at our option, if delivered to Accell Corporation

prepaid, together with a copy of the sales receipt indicating the proof of

purchase date and place of purchase. This warranty excludes defects due

to normal wear, abuse, shipping damage, or failure to use the product

in accordance with the instructions. ACCELL CORPORATION SHALL NOT

BE LIABLE FOR DAMAGES BASED UPON INCONVENIENCE, LOSS OF

USE OF THE PRODUCT, LOSS OF TIME, INTERRUPTED OPERATION OR

COMMERCIAL LOSS, OR ANY OTHER DAMAGES, WHETHER INCIDENTAL,

CONSEQUENTIAL OR OTHERWISE. YOU AGREE THAT ACCELL’S MAXIMUM

LIABILITY ARISING FROM ANY PRODUCT SOLD BY ACCELL SHALL NOT

EXCEED THE PRICE OF SUCH PRODUCT. SOME JURISDICTIONS DO NOT

ALLOW THE LIMITATION OF EXCLUSION OF LIABILITY FOR CERTAIN

DAMAGES, SO THE ABOVE MAY NOT APPLY TO YOU TO THE EXTENT

SUCH JURISDICTION’S LAW IS APPLICABLE TO THIS AGREEMENT. This

warranty gives you specific legal rights, and you may have other rights

that vary from state to state.

LIMITATION OF LIABILITY

IN NO EVENT SHALL ACCELL CORPORATION, ITS SUBSIDIARIES

OR AFFILIATES, OR THEIR RESPECTIVE PARTNERS, OFFICERS,

DIRECTORS, EMPLOYEES, SHAREHOLDERS, REPRESENTATIVES OR

AGENTS (COLLECTIVELY, “ACCELL”) BE LIABLE FOR DIRECT, SPECIAL,

INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR INDIRECT DAMAGES

(INCLUDING BUT NOT LIMITED TO, LOSS OF DATA, USE OR PROFITS),

HOWEVER CAUSED, WHETHER FOR BREACH OF CONTRACT, NEGLIGENCE,

OR OTHERWISE, AND WHETHER OR NOT ACCELL HAS BEEN ADVISED

OF THE POSSIBILITY OF ANY SUCH DAMAGES. YOU AGREE THAT

ACCELL’S MAXIMUM LIABILITY ARISING FROM ANY PRODUCT SOLD

BY ACCELL SHALL NOT EXCEED THE PRICE OF SUCH PRODUCT. SOME

JURISDICTIONS DO NOT ALLOW THE LIMITATION OF EXCLUSION OF

LIABILITY FOR CERTAIN DAMAGES, SO THE ABOVE MAY NOT APPLY TO

YOU TO THE EXTENT SUCH JURISDICTION’S LAW IS APPLICABLE TO

THIS AGREEMENT.

WARRANTY RETURNS PROCEDURE

Contact Customer Support to obtain a Return Authorization (RMA)

number. RMA numbers are valid for 30 days from the date of issuance.

We are unable to accept returns without an RMA number. Returns

without an RMA number clearly printed on the outside of the package

will be refused and returned unopened. All returns must be shipped

prepaid at the expense of the shipper.

Accell assumes no responsibility for any inaccuracies and liability for

direct, indirect, special, incidental, or consequential damages as a result.

Due to ongoing improvements, Accell reserves the right to make changes

to hardware, packaging and any accompanying documentation without

prior written notice.

registered trademarks of Accell Corporation.

LED indicator lights

On initial power on, all LED lights on the matrix should come on solid

blue. All the numerical LED displays will momentarily read ‘0’ and

then change to ‘1 If less than the maximum number of Displays ’.

are connected to the matrix (not all the outputs are used) the

numerical indicator will indicate ‘0’ for that output and there will be no

corresponding blue LED for the unused output. Blue lights HDMI OUT

will only appear for devices connected. Any unused HDMI Input ports will

also have its HDMI IN blue LED unlit.

Operation

Manual Control: u can operate HDMI source switching manually by Yo

using the buttons labeled ‘Out” located on the front panel. Press the

button that corresponds to the output that you want to change the HDMI

source on and toggle through until the desired HDMI input source video

is being displayed. A numerical LED indicates which HDMI source input is

being shown on each output (HDTV).

Remote Control: Included with the Matrix is a Remote Control. The

remote control can control the matrix pointing it at the front of the by

matrix, targeting the integrated IR receiver labeled . IR uses line-of-IR

sight between the remote control (or IR-TX) and the receiver. The angle

which the remote will work is at about a 15° degree angle in either

direction to the recei If the receiver is postioned such that there ver.

is not line-of-sight, the port labeled “IR Extender” accepts an optional

IR Receiver. This receiver enables line-of-sight if the matrix is out of

position.

LED Indicator Lights

Support

Product specificaties

Merk:	Accell
Categorie:	Receiver
Model:	UltraAV K072C-012B
Kleur van het product:	Zwart
Breedte:	277 mm
Diepte:	156 mm
Hoogte:	28 mm
LED-indicatoren:	Ja
HDCP:	Ja
Maximale videoresolutie:	1920 x 1080 Pixels
HDMI versie:	1.4a
HDMI in:	4
Max. overdrachtssnelheid:	6.75 Gbit/s
Bandbreedte:	225 MHz
Aantal HDMI-uitgangen:	2
Bedrijfstemperatuur (T-T):	-15 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 90 procent