Accell UltraAV K078C-006B Handleiding

Accell Receiver UltraAV K078C-006B

Lees hieronder de 📖 handleiding in het Nederlandse voor Accell UltraAV K078C-006B (2 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Model Numbers:

K078C-006B (1x4)

K078C-007B (1x8)

UltraAV®

HDMI Splitter and Distribution

Amplifier

READ ME FIRST – SETUP INSTRUCTIONS

Thank you for purchasing the Accell UltraAV HDMI

Distribution Ampliﬁ er. This product is designed to provide

an exceptional performance and lue. Please review the va

manual before operating and retain for future reference.

- CAUTION -

1. Ensure the unit has sufﬁ cient

ventilation. Do not cover

ventilation openings. Do not install

in a conﬁ ned space.

2. Do not operate near source

of heat. Do not stack on to p,

underneath or between other heat

generating unit/s including other

ampliﬁ ers.

3. Unplug power adapter if not

used for an extended period.

4. prevent damage from power To

surges, the unit should be plugged

into a surge protector or surge pro-

tected power source.

5. Do not use near liquid or areas

of heavy moisture.

6. Clean unit with a clean and dry

cloth only.

7. This unit cannot be serviced in

the ﬁ eld. Contact Accell if service is

required.

8. Do not open case, risk of shock -

shock hazard.

9. Do not modify power cord or use

the product if the power cord is

damaged.

Introduction

The UltraAV HDMI Distribution Amplifier (Splitter) accepts a signal from

a single HDMI enabled audio/video source and splits the single input

into 4 (1x4 Splitter) or into 8 (1x8 Splitter) HDMI outputs. The audio/

video signal is mirrored on up to 4 (1x4 Splitter) or 8 (1x8 Splitter) HDMI

displays, monitors, projectors or TV’s.

Over-Current and Over-Voltage Protection

The circuit boards are equipped with both oltage over-current and over-v

protection and will automatically power down if encountered. The circuit

boards will restore automatically once the ex ltage cessive current or vo

has passed.

Package Contents

● HDMI Distribution Amplifier (Splitter) ● Power Adapter

● Owner’s Manual

specifications continued...

● Operating temperature range: 5 to 131°F (-15 to 55°C)

● Operating humidity range: 5% to 90% RH (no condensation)

1x8 HDMI Distribution Amplifier (Splitter)

Model: K078C-007B

Speciﬁ cations

● Connect 1 HDMI Source to up to 8 HDMI Displays

● Supports HD resolutions up to 1080P and 3D

● HDMI 1.4a, HDCP 1.2 compliant

● Input video signal: 5v p-p, Input DDC signal: 5v p-p (TTL)

● Data transfer speed of 6.75Gbps (225MHz)

● Audio formats supported: DTS-HD 7.1, Dolby True-HD 7.1

● Deep color up to 36-bit

● Maximum input cable length: Up to 20m (24AWG)

● Maximum output cable length: Up to 20m (24AWG)

● Supports cascade up to 6 units (Silicon Image chipset)

● Rack shelf or surface mountable

● 5V DC, UL Listed power adapter

● Input AC: 50Hz to 60Hz, 100-240V

● Approximate dimensions: 10.9”W x 1.1”H x 6.1”D

(277W x 28H x 156D mm)

● Operating temperature range: 5 to 131°F (-15 to 55°C)

● Operating humidity range: 5% to 90% RH (no condensation)

1x4 HDMI Distribution Amplifier (Splitter)

Model: K078C-006B

Speciﬁ cations

● Connect 1 HDMI Source to up to 4 HDMI Displays

● Supports HD resolutions up to 1080P and 3D

● HDMI 1.4a, HDCP 1.2 compliant

● Input video signal: 5v p-p, Input DDC signal: 5v p-p (TTL)

● Data transfer speed of 6.75Gbps (225MHz)

● Audio formats supported: DTS-HD 7.1, Dolby True-HD 7.1

● Deep color up to 36-bit

● Maximum input cable length: Up to 20m (24AWG)

● Maximum output cable length: Up to 20m (24AWG)

● Supports cascade up to 3 units

● Shelf or surface mountable

● 5V DC, UL Listed power adapter

● Input AC: 50Hz to 60Hz, 100-240V

● Approximate dimensions: 10.9”W x 1.1”H x 6.1”D

277W x 28H x 156D mm

Cascading

The HDMI splitter can be cascaded (l ered) to expand the number of ay

supported displays.

K078C-006B (1x4 Splitter) - Supports up to 3 layers.

K078C-007B (1x8 Splitter) - Features a Silicon Image chipset supporting

up to 6 layers.

To create a 2 layer cascade, two same distribution amplifiers must be

used. Run an HDMI cable from an output on unit #1 to the input of unit

#2. A 2 layer cascade of the 1x4 splitter will support up to 7 outputs. A 2

layer 1x8 splitter cascade will support up to 15 outputs.

Setup

With the splitter power switch in the OFF position, connect an HDMI High

Speed cable from the HDMI Output on the audio/video source to the

HDMI Input 1 on the back of the splitte r.

Tips: Use the shortest length HDMI cables possible in each point

in the installation. Use only High Quality and High Speed HDMI

cables.

Next, connect an HDMI cable to the HDMI Output Port 1 on the splitter

and then connect the other end to an HDMI Input Port on the displ ay

device. Similarly, using HDMI cables, connect the remaining HDMI Output

Ports on the rear of the splitter to the HDMI Input ports of the other

displays.

Connect the power adapter to the splitte Plug the power adapter into a r.

surge protected AC power outlet. Turn ON the video source, and turn ON

the displays. Turn the splitter’s power switch to the ON position.

Infrared Control (IR)

The area on the front panel labeled is the IR IR or IR Extender

Transmitter (IR-TX) port.

Using the Ultra-IR Adapter Kit (optional) enables the control of the source

device from the location of the display. Plug the HDMI cable into the IR

Adapter at the displ end. Next plug the IR Adapter HDMI connector ay ’s

into the display. The IR Adapter has a port that accepts an optional IR

Receiver (I RX). When the IR-RX receives an IR signal from the source R-

devices remote control, it uses the HDMI cable’s CEC line to send the

signal to the splitte Plug the optional IRr. -TX into the IR port on the front

panel of the splitte int the end of the IRr. Po -TX at the source device.

The signal is transmitted through the IR-TX sending the IR signal to the

source device.

Note: As the Ultra IR-Adapter uses the CEC channel of the HDMI cable,

the CEC function cannot be used when using this device. rn off CEC or Tu

HDMI Link functionality in the source devices and displays.

The illust tion below shows the optional Ultra-IR Adapter Kit controlling ra

the source device on a 1x4 splitte The 1x8 splitter is setup in a similiar r.

manner. Note: Due to specific pin requirements, only use Accell Ultra-IR

transmitters or receivers.

Ultra-IR Adapter Kit: PN: B164B-001B

Includes IR-Adapter: 1 pc.

IR ansmitter (5 ft.): 1 pc.Tr

Dual Frequency: 38KHZ-60KHZ

IR Receiver (5 ft.): 1 pc.

Ultra-IR ceiver andRe

Transmitter Pin assignment

Ultra-IR ansmitter (5 ft.)Tr

Dual Frequency: 38KHZ-60KHZ

PN: B164B-003B

Troubleshooting

Q. One of the display does not show a picture or output audio.

A. Check the displays input setting to ensure it is set to recei a signal ve

from the connected HDMI port.

Q. One or more of the connected displays will not display a picture while

one or more of the displa ys do display a picture:

A1. Press the button on the front of the splitter to reset it. RESET

Alternatively turn off the power to the splitte source and displays. it r, Wa

60 seconds. Turn the source on. Turn the displays on.Turn the splitter on.

A2. The HDMI cables on the non-functonal display/s cannot support

their long length. Use only high-quality High Speed HDMI cables. Keep

the cable length as short as possible. Test by locating the non-working

display close to the splitter. Use a short HDMI cable to connect the

splitter to the TV. A working TV using a short HDMI cable indicates an

issue with the HDMI cable.

Q. Get the message “This protocol is not supported” or other error

message.

A. See answer A1 abo .ve and repeat the steps outlined

Q. The splitter is not down sampling the video and some of the TV are ’s

not displaying a picture.

Ultra-IR ceiver (5 ft.)Re

Dual Frequency: 38KHZ-60KHZ

PN: B164B-002B

troubleshooting continued...

A1. Go into the TV’s setup and configure the resolution to match all the

connected TV’s. The TV’s should share the same resolution.

A2. In the source devices menu options set the source device to output a

resolution that matches all the connected displays.

Q. My TV resolution are not optimized.’s

A. The splitter will query the displays and provide the highest common

video resolution amongst them. Example: Using a 1080p source, if 3

of the displays support a maximum resolution of 1080p and 1 displ ay

supports a maximim resolution of 720p ate at a , all 4 display will oper

resolution of 720p. If the 720p TV in the example is then turned of the f,

other 3 displays can then operate in 1080p resolution. Press the RESET

button on the front panel of the splitter to refresh the configuration. The

three 1080p TV’s will refresh (flicker) then each will displ a 1080p ay

resolution picture.

ASSISTANCE: Questions regarding this product or its product

warranty, please check out our b site at: www.accellcables.com. We

Customer service can be reached by email at support@accellcables.com

or phone at 510-438-9288, toll free 877-353-0772 (M-F 9am-5pm PST).

1-YEAR MANUFACTURERS WARRANTY

The Accell UltraAV Splitter is warranted for one year from date

of purchase to be free of defects in material and workmanship.

In the event of such defects, the Accell product will be repaired

without charge or replaced with a new one at our option, if

delivered to Accell Corporation prepaid, together with a copy

of the sales receipt indicating the proof of purchase date and

place of purchase. This warranty excludes defects due to normal

wear, abuse, shipping damage, or failure to use the product in

accordance with the instructions. ACCELL CORPORATION SHALL

NOT BE LIABLE FOR DAMAGES BASED UPON INCONVENIENCE,

LOSS OF USE OF THE PRODUCT, LOSS OF TIME, INTERRUPTED

OPERATION OR COMMERCIAL LOSS, OR ANY OTHER DAMAGES,

WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE. YOU

AGREE THAT ACCELL’S MAXIMUM LIABILITY ARISING FROM

ANY PRODUCT SOLD BY ACCELL SHALL NOT EXCEED THE PRICE

OF SUCH PRODUCT. SOME JURISDICTIONS DO NOT ALLOW

THE LIMITATION OF EXCLUSION OF LIABILITY FOR CERTAIN

DAMAGES, SO THE ABOVE MAY NOT APPLY TO YOU TO THE

EXTENT SUCH JURISDICTION’S LAW IS APPLICABLE TO THIS

AGREEMENT. This warranty gives you specific legal rights, and

you may have other rights that vary from state to state.

LIMITATION OF LIABILITY

IN NO EVENT SHALL ACCELL CORPORATION, ITS SUBSIDIARIES

OR AFFILIATES, OR THEIR RESPECTIVE PARTNERS, OFFICERS,

DIRECTORS, EMPLOYEES, SHAREHOLDERS, REPRESENTATIVES

OR AGENTS (COLLECTIVELY, “ACCELL”) BE LIABLE FOR

DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE,

OR INDIRECT DAMAGES (INCLUDING BUT NOT LIMITED

TO, LOSS OF DATA, USE OR PROFITS), HOWEVER CAUSED,

WHETHER FOR BREACH OF CONTRACT, NEGLIGENCE, OR

OTHERWISE, AND WHETHER OR NOT ACCELL HAS BEEN

ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES. YOU

AGREE THAT ACCELL’S MAXIMUM LIABILITY ARISING FROM

ANY PRODUCT SOLD BY ACCELL SHALL NOT EXCEED THE PRICE

OF SUCH PRODUCT. SOME JURISDICTIONS DO NOT ALLOW

THE LIMITATION OF EXCLUSION OF LIABILITY FOR CERTAIN

DAMAGES, SO THE ABOVE MAY NOT APPLY TO YOU TO THE

EXTENT SUCH JURISDICTION’S LAW IS APPLICABLE TO THIS

AGREEMENT.

WARRANTY RETURNS PROCEDURE

Contact Customer Support to obtain a Return Authorization

(RMA) number. RMA numbers are valid for 30 days from the date

of issuance. We are unable to accept returns without an RMA

number. Returns without an RMA number clearly printed on the

outside of the package will be refused and returned unopened. All

returns must be shipped prepaid at the expense of the shipper.

Accell assumes no responsibility for any inaccuracies and liability

for direct, indirect, special, incidental, or consequential damages

as a result. Due to ongoing improvements, Accell reserves

the right to make changes to hardware, packaging and any

accompanying documentation without prior written notice.

are registered trademarks of Accell Corporation.

Product specificaties

Merk:	Accell
Categorie:	Receiver
Model:	UltraAV K078C-006B
Kleur van het product:	Zwart
Breedte:	277 mm
Diepte:	156 mm
Hoogte:	28 mm
LED-indicatoren:	Ja
HDCP:	Ja
Maximale videoresolutie:	1920 x 1080 Pixels
HDMI versie:	1.4a
Ingangsspanning:	100-240 V
HDMI in:	1
Max. overdrachtssnelheid:	6.75 Gbit/s
Bandbreedte:	225 MHz
Aantal HDMI-uitgangen:	4
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	-15 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 90 procent