2hp Swarm Handleiding

2hp Niet gecategoriseerd Swarm

Lees hieronder de 📖 handleiding in het Nederlandse voor 2hp Swarm (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/3
2hp Swarm
Swarm
OUT
DETUNE
VOICES
FREQ
2hp
Hyper Oscillator
Discover more at https://www.twohp.com/modules/swarm
Voices CV Input
Range: -5V to +5V
Voices
Controls the number of active
oscillators. Only 1 oscillator is
active when the knob is fully
counter clockwise.
20 oscillators are active when
the knob is at the center posi-
tion. From there, the number
of active oscillators increments
to dozens of oscillators (max of
88 for Saw, 55 for Pulse) when
the knob is fully clockwise. Detune
Controls the amount detune
applied to each oscillator. The
rst half of the knob provides
tasteful detune, while the
second half provides chaotic
detune.
No detune is applied when
the knob is fully counter
clockwise.
Detune CV Input
Range: -5V to +5V
Freq
1V/Oct Input
Range: -5V to +5V
Freq
Controls the macro pitch of all
active voices. Tracks 1v/oct.
Audio Output
Range: 10Vpp
Tech Specs
Width: 2HP
Depth: 45mm
Power Consumption:
+12V=85mA, -12V=7mA,
+5V=0mA
Wave Toggle
Toggles between sawtooth
(left) and pulse (right)
waveforms.
Watch The Demo
Module Installation
• To install your 2hp module, locate a space with the appropriate HP in your rack for instal-
lation.
• Next, connect the module’s power cable to your power supply. The cables on this end are
keyed, though you should make sure to align the red stripes on both connectors to en-
sure safe and proper connection. Our illustration uses a ying bus cable, though the same
action applies for busboards/alternate power solutions. See the gure below for refer-
ence:
• Next, make sure your module’s power cable is properly connected to your module. For
2hp modules, conrm that your cable’s red stripe aligns with the white marker line on
the module’s PCB, just above the power header. You may notice that even though there
is only 1 row of 5 pins on your 2hp module, but 2 rows on the power cable. You can use
either row of 5 pin connectors on the cable with your module, so long as the red stripe is
properly aligned. See gure below for reference:
• Finally, mount your module to the rails
using 2.5mm mounting screws and the
included sliding mounting nuts. Your
module is now ready to be powered on and
patched!
Module Pairings
Swarm is a versatile sound source on its own, but here are a few considerations from our line
up that we think work great with Swarm!
2hp
OUT
IN
Lo-Fi
A
WOW
HISS
POP
2hp
VCA
IN
CV
OUT
IN
CV
OUT
Lo
Lo
Lo
Lo-
-
-
-Fi
Fi
Fi
FiLo-Fi
Lo-Fi makes a perfect pairing
with Swarm!
Crunch up your swarming saws
with the digital mode on Lo-Fi, or
patch together a wobbly, vintage
synth melody with the analog
mode.
EG
EG
EG
EGEG
Though its envelope is sim-
pler than what’s oered on our
ADSR module, EG’s curve and
amplitude controls are perfect
for dialing in the shape of your
super-saw stabs.
Combine with a VCA, and you are
ready to sequence your trance or
hardcore voice!
VCA
VCA
VCA
VCAVCA
Pair our analog dual VCA with EG
above and Swarm to have your
super-saw voice ready to go!
Use one VCA channel to shape
your sound, while using another
channel to attenuate any mod-
ulation you may be using on
Swarm.
MMF
BP
RESO
FREQ
2hp
HP
LP
INPUT
MMF
MMF
MMF
MMFMMF
Having an analog, state-variable
lter in Swarm’s signal patch is
helpful for adding shaping, dy-
namics, and timbral transitions to
your super-oscillator.
High-pass out your trance lead, or
patch together a squelching bass
line. The pairings don’t get much
better than this.
2hp
EG
OUT
ATTACK
AMP
TRIG
DECAY
LINEAR
EXPO

Product specificaties

Merk: 2hp
Categorie: Niet gecategoriseerd
Model: Swarm

Heb je hulp nodig?

Als je hulp nodig hebt met 2hp Swarm stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd 2hp

2hp

2hp Swarm Handleiding

30 Januari 2025
2hp

2hp Lo-Fi Handleiding

30 Januari 2025
2hp

2hp Bell Handleiding

30 Januari 2025
2hp

2hp Trim Handleiding

30 Januari 2025
2hp

2hp Comb Handleiding

30 Januari 2025
2hp

2hp Rout Handleiding

30 Januari 2025
2hp

2hp S+H Handleiding

30 Januari 2025
2hp

2hp AVert Handleiding

30 Januari 2025
2hp

2hp Delay Handleiding

30 Januari 2025
2hp

2hp Verb Handleiding

30 Januari 2025

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Sunding

Sunding SD-581C Handleiding

30 Januari 2025
Viking

Viking PRONGK1 Handleiding

30 Januari 2025
Creative

Creative Sound BlasterX Katana V2X Handleiding

30 Januari 2025
XTRARM

XTRARM XTR-FS5100 Handleiding

30 Januari 2025
XTRARM

XTRARM XTR-FS5050 Handleiding

30 Januari 2025
XTRARM

XTRARM XTR-FS5110 Handleiding

30 Januari 2025
XTRARM

XTRARM XTR-FS2070 Handleiding

30 Januari 2025
Sunding

Sunding SD-589 Handleiding

30 Januari 2025
XTRARM

XTRARM XTR-FS4030 Handleiding

30 Januari 2025
Viking

Viking PROLPK1 Handleiding

30 Januari 2025