Zmodo Smart Handleiding

Zmodo Deurbel Smart

Lees hieronder de 📖 handleiding in het Nederlandse voor Zmodo Smart (10 pagina's) in de categorie Deurbel. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
QUICK
START GUIDE
SMART DOORBELL
Before you begin
1
Make sure that your wiring is connected to a
mechanical doorbell chime and a transformer
with a low-voltage of 10VAC-36VAC.
Make sure that your package includes the smar t
doorbell, 6 screws and 6 anchors.
You will need a strong WiFi connection near
your doorbell.
Congratulations! We are excited to welcome you
to the next generation of smart technology. We
believe that our products can bring you the best
in convenience and security.
Follow the steps below to install and set up the
doorbell:
DO NOT directly attach the doorbell to primary
power (110/120 VAC and 220/230/240 VAC).
If you do not use a doorbell chime, you MUST
use a 20 ohm/10 watt resistor between the
smart doorbell and one wire from the power
source. Resistor not included in packaging.
Failing to do so will cause damage to the smart
doorbell and void the warranty.
Remove the mounting bracket from your
Smart Doorbell. Loosen the two screws on
the bottom of the doorbell and slide down
to remove the mounting bracket.
Loosen these two screws
Mounting your doorbell
2
Remove your existing doorbell button.
Once you’ve removed your old doorbell,
make sure that the two wires used to
connect your doorbell button remain
exposed.


Product specificaties

Merk: Zmodo
Categorie: Deurbel
Model: Smart

Heb je hulp nodig?

Als je hulp nodig hebt met Zmodo Smart stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Deurbel Zmodo

Zmodo

Zmodo Smart Handleiding

8 Februari 2023

Handleiding Deurbel

Nieuwste handleidingen voor Deurbel