Zebra ZKDU Handleiding

Zebra Keyboard ZKDU

Lees hieronder de đź“– handleiding in het Nederlandse voor Zebra ZKDU (42 pagina's) in de categorie Keyboard. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/42
User’s Guide
Zebra Keyboard Display Unit
ZKDU™
P1059693-001 Rev. A
ii
P1059693-001 Rev. A ZKDU User’s Guide 6/4/2013
© 2013 ZIH Corp. The copyrights in this manual and the software and/or firmware in the
label printer and accessories described therein are owned by ZIH Corp. Unauthorized
reproduction of this manual or the software and/or firmware in the label printer may result in
imprisonment of up to one year and fines of up to $10,000 (17 U.S.C.506). Copyright violators
may be subject to civil liability.
This product may contain ZPL
®, ZPL II®, and ZebraLink™ programs; Element Energy
Equalizer® Circuit; E3®; and Monotype Imaging fonts. Software © ZIH Corp. All rights
reserved worldwide.
ZebraLink and all product names and numbers are trademarks, and Zebra, the Zebra logo,
ZPL, ZPL II, Element Energy Equalizer Circuit, and E
3 Circuit are registered trademarks of
ZIH Corp. All rights reserved worldwide.
All other brand names, product names, or trademarks belong to their respective holders. For
additional trademark information, please see “Trademarks” on the Zebra website.
Proprietary Statement This manual contains proprietary information of Zebra
Technologies Corporation and its subsidiaries (“Zebra Technologies”). It is intended solely for
the information and use of parties operating and maintaining the equipment described herein.
Such proprietary information may not be used, reproduced, or disclosed to any other parties
for any other purpose without the express, written permission of Zebra Technologies.
Product Improvements Continuous improvement of products is a policy of Zebra
Technologies. All specifications and designs are subject to change without notice.
Liability Disclaimer Zebra Technologies takes steps to ensure that its published
Engineering specifications and manuals are correct; however, errors do occur. Zebra
Technologies reserves the right to correct any such errors and disclaims liability resulting
therefrom.
Limitation of Liability In no event shall Zebra Technologies or anyone else involved in the
creation, production, or delivery of the accompanying product (including hardware and
software) be liable for any damages whatsoever (including, without limitation, consequential
damages including loss of business profits, business interruption, or loss of business
information) arising out of the use of, the results of use of, or inability to use such product,
even if Zebra Technologies has been advised of the possibility of such damages. Some
jurisdictions do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you.
iii
6/4/2013 ZKDU User’s Guide P1059693-001Rev. A
FCC Compliance Statement (USA)
This device complies with Part 15 rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for Class B Digital
Devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a residential
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the product manuals, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, the user is encouraged to do one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced RF service technician for help.
The user is cautioned that any changes or modifications not expressly approved by Zebra
Technologies could void the user’s authority to operate the equipment. To ensure compliance,
this printer must be used with fully shielded communication cables.
Canadian DOC Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Product specificaties

Merk: Zebra
Categorie: Keyboard
Model: ZKDU

Heb je hulp nodig?

Als je hulp nodig hebt met Zebra ZKDU stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Keyboard Zebra

Zebra

Zebra ZKDU Handleiding

24 Februari 2023

Handleiding Keyboard

Nieuwste handleidingen voor Keyboard

Elgato

Elgato Stream Deck Neo Handleiding

11 September 2024
Xtrfy

Xtrfy K4 TKL LITE Handleiding

7 Augustus 2024
Ducky

Ducky Zero 6108 Handleiding

5 Augustus 2024
Carlsbro

Carlsbro CDP100 Handleiding

23 Juli 2024
Gamesir

Gamesir GK100 Handleiding

15 Juli 2024
Gamesir

Gamesir Z1 Handleiding

15 Juli 2024
Gamesir

Gamesir VX Handleiding

15 Juli 2024
Gamesir

Gamesir VX2 Handleiding

15 Juli 2024
Kurzweil

Kurzweil SP1 Handleiding

9 Juli 2024
Keychron

Keychron V8 Max Handleiding

29 Juni 2024