XYZprinting RF10BXEU03K Handleiding

XYZprinting Niet gecategoriseerd RF10BXEU03K

Lees hieronder de 📖 handleiding in het Nederlandse voor XYZprinting RF10BXEU03K (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 200 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Filament Replacement Instructions

Take out the stopper by

rotating anti-clockwise.

Remove the stopper Lift the cartridge Change the ﬁlament

and chip

Close the cartridge

Screw in the stopper

tightly

Take out the accessories

from the ﬁlament cartridge

and replace them with new

accessories.

A. Filament parameter chip

B. Filament

C. Desiccant pouch

Press the joint of the casing

of the ﬁlament cartridge

gently and open it.

Put a new filament parameter

chip in place. Make sure it is

placed in the correct direction.

Reassemble the cartridge

and pull the ﬁlament to

make sure it is discharged

smoothly.

Replace the stopper and

screw it up clockwise.

Turn the cartridge over

and make sure the

stopper has been

tightened to its position.

Put a new desiccant pouch

in place.

Direct the ﬁlament through

the guide hole to put out

the ﬁlament easily.

1-1

1-2

2-1 3-1 4-1

4-2

5-1

5-2

3-3

2-2

345

Note

1. Do not use the filament cartridge in an environment with heavy dust or high humidity.

2. Unsealed filament kit must be used as soon as possible to ensure good printing quality.

3. If product is defective out of the box, please contact customer service and return the filament and parameter

chip with the original packing for exchange.

3-2

Product specificaties

Merk:	XYZprinting
Categorie:	Niet gecategoriseerd
Model:	RF10BXEU03K
Gewicht:	600 g
Gewicht verpakking:	1000 g
Type verpakking:	Doos
Diameter:	1.75 mm
Aantal per verpakking:	1 stuk(s)
Merkcompatibiliteit:	XYZprinting
Printkleuren:	Blauw
Compatibiliteit:	da Vinci
Code geharmoniseerd systeem (HS):	84779080
Printmateriaal:	ABS
Glasovergangstemperatuur (min):	70 °C
Glasovergangstemperatuur (max):	90 °C
Temperatuur printkop:	210 °C