Xit XTCG5DIII Handleiding

Xit Overige camera toebehoren XTCG5DIII

Lees hieronder de 📖 handleiding in het Nederlandse voor Xit XTCG5DIII (1 pagina's) in de categorie Overige camera toebehoren. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Protective cover

Electrical contacts

Camera battery compartment

cover slot

Vertical-grip operation switch

Vertical-grip AE start button

Vertical-grip AE lock/FE lock/Index

reduce button

Vertical-grip AF point selection/

Magnify button

Battery release lever

Battery compartment

INSTRUCTIONS

Thank you for purchasing Xit Product.

The XTCG5DIII is a battery grip that can hold two Battery Packs LP-E6

or six size-AA/LR6 batteries. It is also equipped with a vertical-grip

shutter button, Main Dial, etc. to enable shooting in the same way

as a horizontal grip.

ATTACHING TO THE CAMERA

1. Remove the battery from the camera (Fig. 1).

2. Detach the camera's battery compartment cover

3. Insert the detached cover into its storage slot to ensure that it will

not be lost(Fig. 3).

4. Remove the protective cover, and then insert the electrical contacts

into the battery compartment (Fin. 4-1).

5. Align the attachment screw with the camera's tripod socket, and then

turn the attach/detach knob to tighten securely to the camera (Fig. 4-2)

- Be sure to attach the battery grip to the camera before inserting

the batteries. The results of the battery check may not be

displayed properly if you attach the battery grip to the camera

with the batteries already inside.

- Before removing the battery grip from the camera, be sure to

turn the camera's power switch to <OFF>, and take out the

batteries. After removing the batteries, attach the protective

cover to the electrical contacts.

INSERTING THE BATTERY PACKS

1. Slide the lever as shown by the arrow and open the cover (Fig. 5)

2. Press both release levers outward in the battery compartment, and

remove the battery magazine (Fig. 6).

3. Insert one or two Battery Packs LP-E6 in the orientation shown on

the battery compartment cover (Fig. 7).

4. Close the battery compartment cover until it clicks into place.

- If only one battery pack is used, it may be inserted in either the

right or left sides.

- lf two battery packs are inserted, power is supplied

simultaneously by both battery packs. Two battery packs with

dierent charging levels can be inserted and used without any

problems.

- Remove the battery packs from the battery grip when the

camera will not be used for an extended period.

1. Insert the batteries into the Battery Magazine XTCG5DIII (Fig. 8).

Make sure the + and - battery contacts are properly oriented as

shown in the illustration.

2. Turn over the battery magazine so that the inserted batteries are

facing downward, and then insert the battery magazine until the

release lever locks into place (Fig. 9).

3. Close the battery compartment cover until it clicks into place.

INSERTING SIZE-AA/LR6 BATTERIES

- Fewer images can be shot when using size-AA/LR6 batteries.

Also, fewer images can be shot depending on the battery brand

and storage conditions, and so usage of size-AA/LR6 batteries

is recommended only for emergencies.

- With size-AA/LR6 batteries, use six new batteries of the same

brand at temperatures above 20°C/68°F. The camera may

not function when used in low temperatures or old and new

batteries are used together.

USING THE BATTERY GRIP

- Turning the vertical-grip operation switch to <ON> (Fig. 10) makes the

battery grip buttons and dial function in the same way as those

on the camera.

- When shooting in the horizontal-grip position, turn the vertical-grip

operation switch to <OFF> so that you do not accidentally use the

buttons or dial on the battery grip.

BATTERY LIFE

Temperature: +23°C /0°C 73 F/32 F [Number of shots - approx.]° °

Shooting method Power supply

Model Possible

shots

Viewnder shooting

EOS 5D

Mark III

LP-E6 x 2 1700/1500

AA alkaline/LR6 batteries 300/100

Live View shooting

LP-E6 x 2 400/360

- Based on ClPA (Camera & Imaging Products Association) testing standards,

the number of images that can be shot is reduced by holding the shutter

button halfway down for an extended time, and using the AF

frequently without shooting.

- The number of images that can be shot is reduced by frequent usage

of the LCD monitor.

- The battery level can be checked on the LCD panel of the camera and

in the viewnder.

SPECIFICATIONS

Type: Battery grip for the EOS 5D Mark Ill

Power sources: (1) One or two Battery Packs LP-E6

(2)AA alkaline/LR6 batteries x 6

Power switch: Camera's power switch

Working temperature range: 0°C - +40°C / 32°F - 104°F

Working humidity: 85% or less

Dimensions: 149.1 (W) x 114.3 (H) x 76.3 (D) mm/

5.9 (W) x 4.5 (H) x3.0 (D) in.

Weight: Approx. 315 g / 11.1 oz.

(not including the power

supply or battery magazine)

PART NAMES

Battery compartment cover

DC coupler cord mount

Attach/detach knob

Guide pin

Attachment screw

Battery compartment release lever

Vertical-grip shutter button

Vertical-grip Main Dial

Hand strap mount

Tripod socket

Battery magazine XTCG5DIII

Canon

Product specificaties

Merk:	Xit
Categorie:	Overige camera toebehoren
Model:	XTCG5DIII
Kleur van het product:	Zwart
Gebruikershandleiding:	Ja
Ondersteund aantal accu's/batterijen:	8
Merkcompatibiliteit:	Canon
Compatibele producten:	EOS 5D Mark III
Type product:	Digitale camera batterijgreep
Type batterij:	LP-E6
Cylindrische batterij-grootte:	AA