Xantech XT-HDMI-MX42-4K18G Handleiding

Xantech Niet gecategoriseerd XT-HDMI-MX42-4K18G

Lees hieronder de 📖 handleiding in het Nederlandse voor Xantech XT-HDMI-MX42-4K18G (10 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/10

XT-HDMI-MX42-4K18G USER MANUAL

10019358 REV-A0

User Manual

XT-HDMI-MX42-4K18G

Our XT-HDMI-MX42-4K18G 4K HDMI matrix features HDMI 2.0 chipsets with HDCP 2.2 support, allowing distribution of four HDMI sources to two

displays. The unit transmits all HDMI resolutions up to and including 4K 60Hz 4:4:4. The matrix also includes advanced features such as RS-232

for control and conﬁguration of the matrix, bi-directional IR routing, audio breakout and EDID management.

Introduction

Key Features

• Features 4x HDMI inputs which can be independently routed to 2x HDMI outputs

• Supports 4K UHD video (up to 4K @60Hz 4:4:4)

• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio Transmission

• Bi-directional IR from all input and output locations

• HDMI audio breakout via analog L/R audio and coaxial digital outputs concurrently

• Advanced EDID management

• HDCP 2.2

XT-HDMI-MX42-4K18G USER MANUAL

www.xantech.com

Panel Description

Front Panel

IR receiver window for matrix control

Power LED indicator

HDMI output selection buttons 1-2. Press to scroll through source inputs per HDMI output

1 2

Rear Panel

IR input - 3.5mm stereo jack provides zone speciﬁc routed IR

receiver input

IR output - 3.5mm mono jack provides routed IR emitter

output for discrete control of sources

Coaxial digital audio output - RCA (SPDIF)

Analog L/R audio output - 3.5mm stereo audio jack,

Supports 2 channel PCM only

Power on/off switch

EDID DIP switch - Used to manage the video and audio

resolution output by the connected source device.

HDMI inputs - connect to HDMI source devices

HDMI outputs - connect to HDMI display devices

RS-232 Serial port - For control of switcher by third party control

devices

IR input for matrix control

Power port - Use included 12V/2A DC power adaptor

14139

510

10 12

6 7

IR Power

Output 1 Output 2

1 2 3 4 1 2 3 4

XT-HDMI-MX42-4K18G

HDMI 4K 18Gbps 4x2 Matrix

On/Off

3 2

EDID

12V 2A

IR Ext.

RS-232HDMI 1

IR Out 1 IR Out 2 IR Out 3 IR Out 4 IR In L/R OutCoaxial

HDMI 2

Input

Source

HDMI 3 HDMI 4 HDMI 1 HDMI 2

Output

Zone 1

IR In L/R OutCoaxial

Zone 2

OUTPUT AND INPUT SELECTION

A Selects the zone OUTPUT you wish to change the source on (Numbers 1 - 2 correspond to

the zone outputs 1 - 2)

B Selects the source INPUT you wish to change on the selected zone (Numbers 1 - 4

correspond to the source inputs 1 - 4)

EXAMPLE: To switch source 2 to zone 1 you would press 1 in the output section (A) followed

by pressing 2 in the Input section (B).

ALL button: The all button selects all the inputs or outputs in its corresponding box.

Example: (The “All” button in the Output box selects all the zones so all zones will change to

what source input is selected next)

PTP: This button will align all the zone outputs with the like numbered source inputs. Example:

Input 1 to output 1, input 2 to output 2, etc

Remote Control Description

XT-HDMI-MX42-4K18G USER MANUAL

10019358 REV-A0

EDID

3 2 1 0

EDID (Extended Display Identiﬁcation Data) is a data structure that is used between a display and a source. This data is used by the source to ﬁnd

out what audio and video resolutions are supported by the display, from this information the source will discover what the best audio and video

resolutions need to be outputted.

While the objective of EDID is to make connecting a digital display to a source a simple plug and play procedure, issues do arise when multiple

displays or video matrix switching is introduced because of the increased number of variables.

By pre-determining the video resolution and audio format of the sources and display device you can reduce the time needed for EDID hand shaking

thus making switching quicker and more reliable.

Conﬁguration of EDID settings can be achieved using the product dip-switches on the XT-MX42-4K18G. EDID dip-switch settings are shown below.

Note: You must power cycle the product after making EDID changes. For some sources it may be necessary to power cycle the source after EDID

changes have been made for the source to update its video & audio output settings.

Adjusting The EDID Settings

[DIP]=0000: HDMI 1080p@60Hz, Audio 2ch PCM

[DIP]=0001: HDMI 1080p@60Hz, Audio 5.1ch PCM/DTS/DOLBY

[DIP]=0010: HDMI 1080p@60Hz, Audio 7.1ch PCM/DTS/DOLBY/HD

[DIP]=0011: HDMI 1080i@60Hz, Audio 2ch PCM

[DIP]=0100: HDMI 1080i@60Hz, Audio 5.1ch PCM/DTS/DOLBY

[DIP]=0101: HDMI 1080i@60Hz, Audio 7.1ch PCM/DTS/DOLBY/HD

[DIP]=0110: HDMI 4K@60Hz 4:2:0+4K@30Hz 4:4:4, Audio 2ch PCM

[DIP]=0111: HDMI 4K@60Hz 4:2:0+4K@30Hz 4:4:4, Audio 5.1ch PCM/DTS/DOLBY

[DIP]=1000: HDMI 4K@60Hz 4:2:0+4K@30Hz 4:4:4, Audio 7.1ch PCM/DTS/DOLBY/HD

[DIP]=1001: HDMI 4K@60Hz 4:4:4, Audio 2ch PCM

[DIP]=1010: HDMI 4K@60Hz 4:4:4, Audio 5.1ch PCM/DTS/DOLBY

[DIP]=1011: HDMI 4K@60Hz 4:4:4, Audio 7.1ch PCM/DTS/DOLBY/HD

[DIP]=1100: DVI 1280x1024@60Hz, Audio None

[DIP]=1101: DVI 1920x1080@60Hz, Audio None

[DIP]=1110: DVI 1920x1200@60Hz, Audio None

[DIP]=1111: Software Control EDID

EDID Dip-switches

Dip-switch position ‘0’ = Off

Dip-switch position ‘1’ = On

Audio Breakout

The matrix includes audio breakout from the selected HDMI input to associated analogue L/R audio and coaxial digital outputs.

Extracted audio will be concurrent with the corresponding HDMI video output.

1. Coaxial digital output

2. Analogue ﬁxed line level output 3.5mm stereo jack. Note:

supports 2 channel PCM only

1 2

IR In L/R OutCoaxial

Zone 1

IR In L/R OutCoaxial

Zone 2

Product specificaties

Merk:	Xantech
Categorie:	Niet gecategoriseerd
Model:	XT-HDMI-MX42-4K18G

Heb je hulp nodig?

Als je hulp nodig hebt met Xantech XT-HDMI-MX42-4K18G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Xantech

Xantech 791-44 Handleiding

6 Januari 2024

Xantech XSS24100W Handleiding

5 Januari 2024

Xantech DL85K Handleiding

5 Januari 2024

Xantech XT-DIG-11 Handleiding

5 Januari 2024

Xantech 282D Handleiding

4 Januari 2024

Xantech XT-HDMI-MX42-4K18G Handleiding

4 Januari 2024

Xantech XSS26100W Handleiding

4 Januari 2024

Xantech 283D Handleiding

4 Januari 2024

Xantech 17294 Handleiding

4 Januari 2024

Xantech 284D Handleiding

4 Januari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo VPPI Handleiding

21 November 2024

Festo VAVE-P17-TP-5YL1-P Handleiding

21 November 2024

Festo SD-SUB-D-BU9 Handleiding

21 November 2024

Festo SAMH-F12-MK Handleiding

21 November 2024

Festo SFAB Handleiding

21 November 2024

Festo SASC-P4-A-M8-S Handleiding

21 November 2024

Festo SFAH Handleiding

21 November 2024

Festo DRRD-12 Handleiding

21 November 2024

Festo SDE3 Handleiding

21 November 2024

Festo SFTE Handleiding

21 November 2024