Wyse - Dell P20 Dual Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Wyse - Dell P20 Dual (4 pagina's) in de categorie Diversen - Overig. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Wyse P20 Dual VESA Mount
Installation Instructions
The bracket enables a Wyse P20 zero client to be mounted to a wall or on most VESA
compliant mounting surfaces and monitors. Both VESA 75 mm and 100 mm mounting
patterns are supported. The mounting bracket consists of two (2) pieces. The largest
bracket piece attaches to the mounting surface using the VESA mounting patterns.
User-provided hardware must be used that can withstand a force of 25 pounds (11.35
kilograms). The zero client is inserted in a vertical position and cables are attached. The
smaller bracket piece attaches to the VESA compliant mounting monitor. The monitor
bracket and mounted wall bracket pieces are then joined with the provided four (4) thumb
screws.
Notes
When determining location, take into account the cable lengths of the
monitor, keyboard, mouse, power supply, and peripherals.
Mount the zero client only as indicated; improper orientation (where the back
panel or front panel is facing down) could inhibit the dissipation of heat from
the device and damage it.
Do not enclosed the zero client in a confined environment without proper
ventilation. If you have questions, contact the Wyse Sustaining Engineering
Group.
2
Use the following instructions to mount the zero client:
1. Attach the largest bracket to the mounting surface (a swing arm mount is shown). The
mounting surface can have either the VESA 75 mm or 100 mm mounting pattern. The
bracket should be placed upright as shown. Secure the bracket with proper
user-provided hardware that can withstand a force of 25 pounds (11.35 kilograms).
Note
If installing on a hollow wall, any standard anchoring method may be used,
such as screws, butterfly anchors, or expansion bolts.
2. Slide the zero client into the mounted bracket as shown using the pre-assembled guide
rails until it clicks into place. The power button must be positioned as shown.
3
3. If you have mounted the bracket to a wall, now is most convenient time to attach all
desired connections to the zero client.
4. Position the remaining bracket on the monitor as shown to match a set of mounting
holes. Both VESA 75 mm and 100 mm mounting patterns are supported. The bracket
should be placed with the turned edge on top (pointing downward). Secure with four (4)
user-provided screws (do not overtighten).
Note
If you have mounted the zero client bracket to a wall, now is the most
convenient time to attach all desired connections to the monitor before
assembling the two brackets pieces together.


Product specificaties

Merk: Wyse - Dell
Categorie: Diversen - Overig
Model: P20 Dual

Heb je hulp nodig?

Als je hulp nodig hebt met Wyse - Dell P20 Dual stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Diversen - Overig Wyse - Dell

Handleiding Diversen - Overig

Nieuwste handleidingen voor Diversen - Overig