Saitek 3D 210 Stereo Speaker System Handleiding

Saitek Diversen - Overig 3D 210 Stereo Speaker System

Lees hieronder de 📖 handleiding in het Nederlandse voor Saitek 3D 210 Stereo Speaker System (11 pagina's) in de categorie Diversen - Overig. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

Saitek

3D 210

Stereo Speaker System

USER GUIDE

BEDIENUNGSANLEITUNG

GUIDE D’UTILISATION

MANUALE D’USO

MANUAL DEL USUARIO

3D 210_Manual_Final.qxd 06/06/2007 15:04 Page 1

If you do not have access to the internet, or if the website cannot answer your

question, please contact your local Saitek Technical Support Team. We aim to offer

quick, comprehensive and thorough technical support to all our users so, before you

call, please make sure you have all the relevant information at hand.

To find your local Saitek Technical Support Center, please see the separate Technical

Support Center sheet that came packaged with this product.

Information for Customers in the United States

FCC Compliance and Advisory Statement

Warning: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1 This device may not cause harmful interference, and;

2 This device must accept any interference received, including interference that may

cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna;

• Increase the separation between the equipment and receiver;

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected;

• Consult the dealer or an experienced radio/TV technician for help.

Saitek Industries, 2295 Jefferson Street, Torrance, CA 90501, USA

Canada 210

Operation is subject to the following two conditions:

1 This device may not cause interference, and;

2 This device must accept any interference, including interference that may cause

undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

ENGLISH

Saitek 3D 210 Stereo Speaker System

Congratulations on buying the Saitek 3D 210 Stereo Speaker system.

The Saitek 3D 210 has two speaker units with ASIS (Advanced Stereo Imaging

System) and a bass contour control to give you enhanced bass and clear treble from

any analog music source.

Operating the Saitek 3D 210 is simple:

1 Plug the 9V DC transformer cable into the speaker unit’s power-in socket. Plug the

adapter into a wall socket and switch on.

2 Plug the 3.5mm jackplug cable into the audio out socket of your PC, iPod, MP3

player, PSP etc.

3 Turn the volume control clockwise until it clicks and the red light illuminates. The unit

is now on.

4 With the 3D 210’s volume control at 0, turn on your music source, press Play and

adjust the volume level of your PC, iPod, MP3 player, PSP etc to three quarters.

Now turn up the 3D 210’s volume to the desired listening level.

5 You can use the Saitek 3D 210’s bass contour control to adjust the frequency

response of the speaker system to suit your listening environment. To increase bass

boost, turn the bass contour control clockwise. To reduce bass boost, turn the bass

contour control anti-clockwise.

6 Do not use your 3D 210 at excessive volume levels. If your 3D 210 sounds

distorted, turn down the volume and/or bass contour controls until the distortion

stops.

Positioning the speaker system

You can position the 3D 210 speakers in three different ways to suit your listening

environment and preferred sound.

Technical Support

Can't get started - don't worry, we're here to help you!

Nearly all the products that are returned to us as faulty are not faulty at all - they have

just not been installed properly.

If you experience any difficulty with this product, please first visit our website

www.saitek.com. The technical support area will provide you with all the information

you need to get the most out of your product and should solve any problems you might

have.

3D 210_Manual_Final.qxd 06/06/2007 15:04 Page 2

Stereo-Lautsprechersystem Saitek 3D 210

Herzlichen Glückwunsch zu Ihrer Entscheidung für das Lautsprechersystem Saitek 3D

210.

Das Saitek 3D 210 verfügt über zwei Lautsprechereinheiten mit ASIS (Advanced Stereo

Imaging System, hochentwickeltes Stereo-Abbildungssystem) und einer

Basskontursteuerung, die Musik aus jeder analogen Quelle mit verbesserten Bässen

und klaren Höhen wiedergeben.

Die Bedienung des Saitek 3D 210 ist einfach:

1 Stecken Sie das Kabel vom Transformator mit 9 V Gleichspannung in die

Versorgungsbuchse des Geräts. Schließen Sie den Adapter an eine Wandsteckdose

an und schalten Sie ein.

2 Stecken Sie das Kabel mit dem 3,5-mm-Klinkenstecker in die Buchse Audio Out

Ihres PCs, iPods, MP3-Players, Ihrer PSP usw.

3 Drehen Sie den Lautstärkeregler im Uhrzeigersinn, bis er klickt und die rote

Kontrollleuchte aufleuchtet. Das Gerät ist jetzt eingeschaltet.

4 Behalten Sie am 3D 210 eine Lautstärkeeinstellung von 0 bei. Schalten Sie Ihre

Musikquelle an, drücken Sie auf Abspielen und stellen Sie die Lautstärke an Ihrem

PC, iPod, MP3-Player, Ihrer PSP usw. auf drei Viertel der Gesamtlautstärke. Jetzt

drehen Sie die Lautstärke am 3D 210 auf den gewünschten Hörpegel.

5 Mit Hilfe der Basskonturregelung des Saitek 3Dkönnen Sie den Frequenzbereich

des Lautsprechers Ihrer Hörumgebung anpassen. Um die Bassleistung zu erhöhen,

drehen Sie den Basskonturregler im Uhrzeigersinn. Um die Bassleistung zu

verringern, drehen Sie den Basskonturregler gegen den Uhrzeigersinn.

6 Benutzen Sie den 3D 210 nicht mit übermäßiger Lautstärke. Wenn sich der Ton des

3D 210 verzerrt anhört, drehen Sie den Lautstärkeregler und/oder den Bass-Kontur-

Regler zurück, bis die Verzerrungen aufhören.

Positionierung des Lautsprechersystems

Sie können die Lautsprecher des 3D 210 auf drei verschiedene Weisen positionieren,

um sie an Ihre Hörumgebung anzupassen und Ihr bevorzugtes Klangbild zu schaffen.

Technischer Support

Probleme - keine Angst, wir lassen Sie nicht im Stich!

Wussten Sie, dass fast alle Produkte, die als fehlerhaft an uns zurückgeschickt werden,

überhaupt nicht defekt sind? Sie wurden einfach nicht richtig installiert!

Sollten Sie Probleme mit diesem Produkt haben, besuchen Sie bitte zuerst unsere

Website www.saitek.de. Unsere Website, speziell der Bereich Technischer Support,

Conditions of Warranty

1 Warranty period is 2 years from date of purchase with proof of purchase submitted.

2 Operating instructions must be followed.

3 Specifically excludes any damages associated with leakage of batteries.

Note: Batteries can leak when left unused in a product for a period of time, so it is

advisable to inspect batteries regularly.

4 Product must not have been damaged as a result of defacement, misuse, abuse,

neglect, accident, destruction or alteration of the serial number, improper electrical

voltages or currents, repair, alteration or maintenance by any person or party other

than our own service facility or an authorized service center, use or installation of

non-Saitek replacement parts in the product or the modification of this product in

any way, or the incorporation of this product into any other products, or damage to

the product caused by accident, fire, floods, lightning, or acts of God, or any use

violative of instructions furnished by Saitek plc.

5 Obligations of Saitek shall be limited to repair or replacement with the same or

similar unit, at our option. To obtain repairs under this warranty, present the product

and proof of purchase (eg, bill or invoice) to the authorized Saitek Technical Support

Center (listed on the separate sheet packaged with this product) transportation

charges prepaid. Any requirements that conflict with any state or Federal laws, rules

and/or obligations shall not be enforceable in that particular territory and Saitek will

adhere to those laws, rules, and/or obligations.

6 When returning the product for repair, please pack it very carefully, preferably using

the original packaging materials. Please also include an explanatory note.

7 IMPORTANT: To save yourself unnecessary cost and inconvenience, please check

carefully that you have read and followed the instructions in this manual.

This warranty is in lieu of all other expressed warranties, obligations or liabilities.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT

NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO

THE DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not

allow limitations on how long an implied warranty lasts, so the above limitations may

not apply to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL OR

CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER

WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow

the exclusion or limitation of special, incidental or consequential damages, so the

above limitation may not apply to you. This warranty gives you specific legal rights,

and you may also have other rights which vary from state to state.

This symbol on the product or in the instructions means that your

electrical and electronic equipment should be disposed at the end of its

life separately from your household waste. There are separate collection

systems for recycling in the EU.

For more information, please contact the local authority or your retailer

where you purchased the product.

3D 210_Manual_Final.qxd 06/06/2007 15:04 Page 4

Product specificaties

Merk:	Saitek
Categorie:	Diversen - Overig
Model:	3D 210 Stereo Speaker System

Heb je hulp nodig?

Als je hulp nodig hebt met Saitek 3D 210 Stereo Speaker System stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Diversen - Overig Saitek

Saitek CONTROL DECK FOR PC Handleiding

29 September 2023

Saitek 3D 380 2.1 Active Speakers Handleiding

29 September 2023

Saitek 3D 210 Stereo Speaker System Handleiding

29 September 2023

Saitek PRECISION CONTROL PACK Handleiding

29 September 2023

Saitek 3D 590 2.1 Active Speakers Handleiding

29 September 2023

Saitek Hi-Speed USB 2.0 Hub Handleiding

29 September 2023

Saitek Pro Flight Headset Handleiding

29 September 2023

Handleiding Diversen - Overig

Nieuwste handleidingen voor Diversen - Overig

Ewent EW3967 Handleiding

14 Oktober 2023

Ewent EW3974 Handleiding

14 Oktober 2023

Ewent EW3965 Handleiding

14 Oktober 2023

Ewent EW3705 R2 USB 2.0 Video Grabber Handleiding

14 Oktober 2023

Ewent EW3973 Handleiding

14 Oktober 2023

Ewent EW3971 Handleiding

14 Oktober 2023

Sharkoon QuickPort Combo USB 3.0 Handleiding

26 September 2023

Sharkoon SATA QuickPort Intern 1-Bay Handleiding

26 September 2023

Sharkoon SilentStorm SFX Bronze Handleiding

26 September 2023

Sharkoon SATA QuickPort XT Duo Clone Handleiding

26 September 2023