Woods Cascade 4 Handleiding

Woods Tent Cascade 4

Lees hieronder de 📖 handleiding in het Nederlandse voor Woods Cascade 4 (8 pagina's) in de categorie Tent. Deze handleiding was nuttig voor 85 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
OWNER’S MANUAL
Cascade 4 Tent
CTC Model: 076-6075-6
DANGER!
Stoves, lanterns, candles, grills, heaters and other fuel-burn-
ing devices
produce carbon monoxide and will consume the available
oxygen in
the tent. Use of such devices in a tent may cause asphyxia-
tion,
carbon monoxide poisoning, and death or serious and
permanent
WARNING!
KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS
FABRIC.
This product is made withame-resistant fabric, which meets
CPAI-84
specications. IT IS NOT FIREPROOF! The fabric will burn if
left in
continuous contact with any ame source. The application
of any
foreign substance to the fabric may render the ame-resis-
tant
properties ineective.
Anchor properly at all times and carefully consider campsite
choice.
Be aware of possible falling rocks or tree limbs, lightning
CLEANING:
Allow dirt to dry on the fabric after a rainfall before lightly
sweeping
it o with a brush. For tougher stains, spray the area with
water and
lightly wipe it o with a few strokes. Do not use washer or
dryer.
DO NOT SCRUB THE FABRIC AND ALWAYS MAKE SURE IT IS
CTC 7-DAY REPLACEMENT WARRANTY
Unpack and inspect all contents for defects in workmanship
and
materials within 7 days of purchase. If any defects are found,
return the
product to the place of purchase, along with proof of pur-
chase, and
it will be replaced free of charge.
1-YEAR REPLACEMENT PARTS WARRANTY
This product carries a replacement parts warranty against
defects in
materials and workmanship for a period of 12 months from
date of
purchase. At its discretion, the manufacturer may provide
replacement
parts. Original purchaser will be required to provide proof of
purchase.
The consumer will be responsible for shipping costs incurred
outside
of the U.S. or Canada.
Warranties DO NOT cover normal wear and tear, misuse,
abuse,
inclement weather conditions (e.g. wind, rain, hail, lightning,
tornadoes
or hurricanes) or other acts of God, mildew and rotting,
damage or
fading caused by prolonged exposure to UV rays. This war-
ranty gives
you specic legal rights. You may also have other rights
which vary
depending on locale. Under no circumstances shall the
manufacturer
be liable for any incidental or consequential damages.
The tent is water-repellent. It is not waterproof. During heavy
or
continuous rain, some leakage may occur. Avoid contact
between
objects and the inside of the tent, as this may result in leak-
age at
points of contact. In the event of seam leakage, apply
a seam-sealer compound.
Although our products are manufactured according to
rigorous
specications, periods of wind or rain may loosen the stakes
and
cause the frame to sink into the ground. This will weaken the
structure’s overall rigidity. Puddles may also form on the roof
if
the unit has not been assembled tightly. If pooling should
occur,
it is advisable to drain the y to avoid possible damage to
frame
and fabric. Adjustment of guy lines may be necessary. In case
NOTICE!
Do not return to retail store
for warranty consideration.
Call Toll-Free helpline:
CAMPERS’ TIPS
The key to an enjoyable camping experience is planning
and preparation.
Before you go...
Research the area where you intend to camp. Prepare for any
possible weather condition. Be aware of hazards and emer-
gency
protocol. Know the rules and regulations.
Check out your equipment before your trip. Be sure your
cook stove, lanterns, ashlights, air mattress, etc., are in good
working order.
Erect your tent to become familiar with setup.
Once you’ve assembled your tent in a dry, well-ventilated
area, apply
seam-sealing compound to the stitching of the inside seams
following manufacturer’s directions. Allow to dry thoroughly
before storage. Reapply annually.
Checklists are great planning tools. Here are some areas to
consider.
Camp Setup:
Tent, chairs, table, ground cloth, entrance mat, tarp, poles,
rope, stakes, bungee cords, duct tape, zip ties, hammer/tools,
bedding.
Kitchen setup, food and beverages:
Plan for transport, preparation, storage and disposal.
Remember to pack re-starting devices in waterproof contain-
ers, and bring pots, dishes, utensils, can opener, heavy-duty
garbage bags and
biodegradable soap. Store your food in lockers or out of sight
in
vehicles.
Clothing: Be prepared for all your activities. Include a hat,
sunglasses and quality socks. Dress in layers.
Cascade 4 Tent
076-6075-6
ASSEMBLY INSTRUCTIONS
IMPORTANT NOTES:
Assemble your tent before camping to become familiar with
the
assembly.
Two people are recommended for setup.
Select a clean, level area for the campsite, free of debris and
sharp
objects, away from any natural watercourse.
Use of a ground cloth is recommended to prolong the life of
the tent
oor and provide additional insulation and moisture pro-
tection.
To prevent damage to the zippers, unzip the doors and
windows of
the tent prior to disassembly, allowing air to move freely.
Seam-seal the inside stitched seams of the tent. This will
improve
weather resistance. Available in sporting goods departments.
Discolouration may occur if applied to outside seams.
Tent: 1 each Aluminum Poles: 4 each
(total)
Rainy: 1 each
“V Aluminum Stakes: 12 each
1) Assemble the poles by placing aluminum sections into metal
ferrules. Three poles are provided.
Step 2: Assemble poles
Step 4: Raise the tent:
Step 1: Verify package contents
Step 3: Spread tent, attach pole clips, stake at one end
1) Spread out the tent at, oor side down.
2) Lay out the poles in a crisscross fashion across the inner tent.
1) Start both ends of one pole and insert the pole into an arc and attach into the opposite corner
webbing grommet.
2) Attach the pole clips to the arched pole.
3) Repeat this procedure with the other cross pole. Your inner tent is now free standing.
2 each (A) Main Poles
2 each (B) Fly Ridge
(A) Main 2 each (B) Fly Ridge
A
A
A A
1) Stake down the tent by inserting a stake
through the stake loops, located along the
perimeter of the tent.
2) Make certain the tent oor is pulled out
evenly and tightly.
3) Hammer the stakes into the ground at a 45°
angle using a hammer or mallet.
1) Unfold the rainy and place over the tent.
Make sure that the rainy awning is over the front
door.
2) Attach the rainy to the tent by attaching the
plastic side release female buckle on the rainy
corners to the plastic side release male buckle at
the tent corners.
3) Adjust tension using the webbing ladder locks
1) To take down the tent, disassemble in reverse
order.
2) Remove and fold rainy.
3) Be sure to leave doors and windows unzipped
to avoid zipper damage.
4) Remove stakes with hammers or stake puller.
DO NOT pull on tent.
5) Carefully disengage poles from pins. Push
poles away from you through the sleeves to mini-
mize risk of damage to tent or poles.
6) Keep poles and stakes together in bags
provided.
1) Spread tent at, distribute evenly.
2) Fold into quarters not to exceed the length of
pole bag.
3) Lay pole bag at opposite end from door.
Tightly roll bag, skin and rainy forcing air
through unzipped door.
4) Secure with ties and place in carry bag with
Be certain campres are extinguished.
Dispose of garbage appropriately.
1) Secure tent using all guy lines and stakes. Tent
must be secured for proper function.
Tent appears as shown
Tent appears as shown
Step 5: Stake tent
Step 9: Fully assembled Step 10: Disassembly Step 11: Packing the tent
Step 6: Body assembled Step 7: Attach the rainy Step 8: Secure the rainy
Dimension A should
be close to but not
exceed the length
of the pole bag.
A
Fold tent into a
rectangular shape.
Front of tent
(door unzipped)


Product specificaties

Merk: Woods
Categorie: Tent
Model: Cascade 4

Heb je hulp nodig?

Als je hulp nodig hebt met Woods Cascade 4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Tent Woods

Handleiding Tent

Nieuwste handleidingen voor Tent