WHALE Gusher 10 Mk3 Handleiding

WHALE Niet gecategoriseerd Gusher 10 Mk3

Lees hieronder de 📖 handleiding in het Nederlandse voor WHALE Gusher 10 Mk3 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Thank you for purchasing this Whale® product.

For over 60 years Whale® has led the way in the design and manufacturer of water and waste systems

including:- plumbing, faucets, showers and pumps for low voltage applications. The company and its products have

built a reputation for quality, reliability and innovation backed up by excellent customer service.

For information on our full product range visit: www.whalepumps.com

CONTENTS

1. Principles of Operation

2. Specification

3. Application

4. Warnings

5. Parts List

6. Optional Extras

7. Installation

8. Maintenance

9. Trouble Shooting

10. Winterising

11. Service Support Details

12. EU Declaration of Conformity

13. Patents and Trademarks

14. Warranty

LIST OF IMAGES

Fig. 1 Through deck installation

Fig. 2 Incorrect installation

Fig. 3 Typical installation diagram

Fig. 4 Mounting arrangements for a standard model

Fig. 5 Dimensions

Fig. 6 Discharge point is well above the water line

Fig. 7 Deck fitting for Gusher Pumps (Half sectional elevation of deck fitting, pump and bracket)

Fig. 8 Exploded diagram

Read the following carefully before installation

To the Fitter:

Check that the product is suitable for the intended application. Follow these installation instructions and ensure all

relevant personnel read the points listed below. Also ensure that these operating instructions are passed on to the

end user. The manufacturer cannot be held responsible for claims arising from incorrect installation, unauthorised

modification or misuse of the product.

To the User:

Read the following instructions carefully.

Whale Gusher®10 Mk3 Pump BP3708 / BP3740

INSTALLATION & USER INSTRUCTIONS

This bilge pump is designed to exhaust standing water only. Manufactured from durable diecast alloy to withstand

tough marine conditions.

This bilge pump is suitable as a primary bilge pump on boats equal to or greater than 12m (40ft). Output capacity

depends on installation, conditions during use and pumping rate. Users should be aware that capacity may not be

sufficient to cope with rapid influx of water. If it is intended for any other purpose or with any other liquid, it is the

users responsibility to ensure that the pump is suitable for the intended use and, in particular, that the materials are

fully compatible with the liquids to be used.

• The pump is designed to evacuate standing bilge water only. Bilge pump capacities may not be sufficient to

prevent flooding from rapid accumulation of water due to storms, rough weather and/ or rapid leaks created

by hull damage and or unsafe navigational conditions.

• Fitting an inlet strainer will ensure the maximum efficiency of the pump.

• This pump is not for use in systems evacuating water through a skin fitting or seacock below the waterline.

All pipework must contain a corectly installed anti-syphon valve/loop (next page see Fig 3 - Typical

installation diagram).

•Not suitable for pumping flammable liquids, diesel, chemicals etc. Suitable for bilge water only.

• With all applications, it is important that a system of safe working practice is applied to installation, use and

maintenance. Ensure the waste water system is drained before installation. In order to securely fasten the

unit, ensure that the mounting surface is a minimum thickness of 18mm (45/64") as shown in Fig. 4

•NOTE Do not screw directly to the hull - must be mounted on a bulkhead or on an additional board.

1. PRINCIPLES OF OPERATION

4. WARNINGS

2. SPECIFICATION

Model On Deck / Bulkhead Thru Deck / Bulkhead

(includes deck plate)

Product Code BP3708 BP3740

Hose Connections 38 mm (1 1/2”) Smooth Hose Connections

Weight 2.3 kg (5 lbs)

Materials

Pump Body: Marine Grade LM6 Aluminium Alloy (epoxy coated).

Diaphragm: Neoprene (Nitrile®option available)

Fasteners: Stainless Steel

Materials In Contact With Fluid Marine Grade LM6 Aluminium Alloy (epoxy coated).

Neoprene, Nitrile®, Stainless Steel

Service Kit

AK3706 - Neoprene Parts

AK3714 - Nitrile® Parts for Oil & Diesel

Contains: Diaphragms, Valves, Gasket

Maximum Suction Lift 4 m (13.5ft)

Maximum Discharge Head 4 m (13.5ft)

3. APPLICATION

Performance Data BP3708 / BP3740 BP3708 / BP3740

Suction Lift 1 m (3 ft) 2 m (6 ft)

Discharge Head 0.5 m (1.5 ft) 0.5 m (1.5 ft)

45 Strokes per Minute 41 ltrs (11 US gals) 41 ltrs (11 US gals)

70 Strokes per Minute 65 ltrs (17 US gals) 65 ltrs (17 US gals)

1 x Mk3 Gusher® 10 pump

1 x Stainless steel handle

(BP3740 includes deckplate)

1 x Mounting hole template

AS4405 - Spare handle

DP3804 - Metal deckplate & lid

DP8904 - Plastic deck plate

SB5865 - Strum box (top entry)

SB4222 - Strum box (side entry)

Please note that incorrect installation may invalidate the warranty.

LOCATION

Choose a position to mount the pump that is dry and away from standing water and is free from obstacles, where the

pump can be operated efficiently and comfortably. Ensure that the pump is installed to allow easy access for

servicing.

Avoid installation locations which require a cockpit locker to be opened in order to operate the pump.

To ensure good priming and flow:

• Avoid sharp bends in pipework.

• Fit a Whale strumbox / strainer part number SB4222 / SB5865

which prevents the end of the hose sucking against a flat

surface and allows the water level to be reduced to a minimum.

• To minimise pumping effort, site the pump halfway (in height)

between the strumbox / strainer and hull outlet.

• Mount in a position with the shortest run lengths possible.

• Use a reinforced hose on inlet to prevent collapsing during suction.

The Gusher® 10 is designed for mounting on deck / bulkhead (BP3708), or

through deck / bulkhead (BP3740). The handle can be fixed on four different

positions relative to the inlet and outlet (see Fig. 4).

To Reposition Handle:

(a) Slacken wormdrive clip and remove diaphragm

(b) Undo the bolts from bracket and rotate body to new position relative to the fork and diaphragm. Note: Inlet

and outlet are always at 180 degrees to each other

6. OPTIONAL EXTRAS

5. PARTS LIST

Fig. 1 Through deck installation

7. INSTALLATION

Fig. 4 Mounting arrangements for a standard model

Fig. 2 Incorrect installation Fig 3 - Typical installation diagram

Product specificaties

Merk:	WHALE
Categorie:	Niet gecategoriseerd
Model:	Gusher 10 Mk3

Heb je hulp nodig?

Als je hulp nodig hebt met WHALE Gusher 10 Mk3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd WHALE

WHALE Instant Match SDP134Tn Handleiding

20 Juli 2024

WHALE Gusher 30 Handleiding

19 Juli 2024

WHALE UF2214 Handleiding

19 Juli 2024

WHALE Gusher 10 Mk3 Handleiding

19 Juli 2024

WHALE InstantMatch Premium SDP303T Handleiding

19 Juli 2024

WHALE Switch Connect BP1578 Handleiding

19 Juli 2024

WHALE Smartbail Handleiding

3 Juli 2024

WHALE Supersub Smart Handleiding

3 Juli 2024

WHALE Sense Handleiding

3 Juli 2024

WHALE Bilge IC Handleiding

3 Juli 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Parkside PWSZS 1 Handleiding

15 November 2024

Parkside WWS-GLK9-Y02 Handleiding

15 November 2024

Fibaro Roller Shutter 3 FGR-223 Handleiding

15 November 2024

Vitalmaxx 02048 Handleiding

15 November 2024

Swissvoice S510-C Handleiding

15 November 2024

Bushnell Spot On 66060WM Handleiding

15 November 2024

Bushnell 119512B Handleiding

15 November 2024

Gembird MF-95-02 Handleiding

15 November 2024

Hikvision DS-PI-T200 Handleiding

15 November 2024

Zipper ZI-UVGW1 Handleiding

15 November 2024