Wet Sounds WW-BT-VC Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Wet Sounds WW-BT-VC (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 78 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Installation Instructions:
Surface Mount Instructions:
Flush Mount Instructions:
Drill a 7/8" hole. Unscrew the locking nut on the back of the device
and pull apart. Slide the unit thru the hole and attach the nut on the
back side.
Note: You can adjust the orientation of the knob in either of
the two mounting positions by loosening the nut on the back
side and rotating the knob to a dierent position. Example,
the mark can either be at 12, 3, 6 & 9 o'clock position.
Skip one track back
• Skip one track back
Adjust volume UP
• Turn and hold the knob clockwise.
Adjust volume DOWN
• Turn and hold the knob counter-clockwise.
• Hook the red wire to 12volt +
• Hook the black wire to 12 volt -
• Insert a 3.5 mm audio cable into the back of the device and connect
to your source or amplier.
Use the 2 Phillips screws to mount
Operation Instructions:
Play music (Some phones may require you to start a media player
rst)
• Tap the knob once.
Pause music
Skip one track forward
• Tap the knob to pause, and tap again to resume playing.
• Turn the knob clockwise.
Instruction Duration
Tap
Turn Approx: 1 second
Press briey
Turn and hold Approx: 3 seconds
Bluetooth® device is connected to phones using a procedure called
pairing. By following a few simple steps, a phone can easily be
paired with the WW-BT-VC.
Follow your phones instruction guide for Bluetooth® pairing. First
make sure that Bluetooth is activated on your mobile phone. Then
set your phone to discover the Bluetooth device. This usually
involves going to settings, connect or Bluetooth menu on your
phone and selecting the option to discover or add a Bluetooth
device. Your phone will nd the Bluetooth® receiver under the
name WW-BT-VC. After selecting WW-BT-VC your phone will
conrm when pairing is complete.
1. Press the knob and hold until you see red and blue LED
lights blinking . At this time, it gets into pair status.
2. Set your Bluetooth phone to search for the Bluetooth®
device (WW-BT-VC).
The WW-BT-VC is easy to operate. One knob performs dierent
functions depending on how long you turn and hold it:
1 2


Product specificaties

Merk: Wet Sounds
Categorie: Niet gecategoriseerd
Model: WW-BT-VC

Heb je hulp nodig?

Als je hulp nodig hebt met Wet Sounds WW-BT-VC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Wet Sounds

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd