WestBend Grain Mill 555 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor WestBend Grain Mill 555 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 105 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
2008 Back To Basics®, a Brand of Focus Electrics, LLC.
www.focuselectrics.com
GRAIN MILL
Instruction Manual
Register this and other Focus Electrics products through our website:
www.focuselectrics.com
Assembling Your Grain Mill...................................................................................... 2
Using Your Grain Mill ............................................................................................... 3
Cleaning Your Grain Mill ......................................................................................... 3
Helpful Hints............................................................................................................. 3
Warranty .................................................................................................................. 4
SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
2
Assembling Your Grain Mill
Hopper
Clamp Screw with Lever
*The handle arm, wood handle grip, handle bolt and nut for the handle bolt is
considered the “Arm Assembly.” These parts are not sold separately.
Milling
Cone
Shaft
with
Nylon
Sleeve
Housing
with Milling
Ring
Handle Knob
Adjustor
Handle Arm
Wood Handle
Grip
Handle Bolt
Nylon
Washer
Housing
Cover
Cover Nut for
Screw Handle Bolt
Rubber Pad
Clamp Cap
Cover
Clamp Cap
3
Keep your work area, all equipment and utensils clean. Before using, dismantle the
grinder and wash all parts in warm, soapy water.
1. Insert the shaft and attached milling cone through the housing.
2. Slip the nylon washer on the end of the shaft.
3. Attach the arm assembly with the handle knob adjustor. DO NOT OVER
TIGHTEN.
U
SING
Y
OUR
G
RAIN
M
ILL
Mount the Grain Mill on a table or counter top and secure with the clamp screw.
Select the desired texture by turning the handle knob adjustor clockwise for fine
milling or counter-clockwise for a coarser texture. DO NOT OVER TIGHTEN. This
will cause excessive wear and may damage the grain mill. Turn the handle knob
adjustor clockwise until snug, then add grain and begin milling.
C
LEANING
Y
OUR
G
RAIN
M
ILL
The Back To Basics® Grain Mill is easy to clean. Simply use a brush or cloth to wipe
clean. If a thorough cleaning is needed; wash in warm, soapy water, rinse and dry
thoroughly.
H
ELPFUL
H
INTS
This product is designed to grind grains and dried nuts. Never put any foreign
objects not intended for this product into the grinder.
Most dried beans and nuts can be ground, but may need to be chopped into smaller
pieces before the grinder will accept them. This can be done easily with a food
chopper or blender.
We do not recommend grinding peanuts or other fresh nuts as they contain too much
oil. This will cause the shaft to bind and ruin the milling cone.


Product specificaties

Merk: WestBend
Categorie: Niet gecategoriseerd
Model: Grain Mill 555

Heb je hulp nodig?

Als je hulp nodig hebt met WestBend Grain Mill 555 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd WestBend

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd