Waves Blender To Go BL-1070721 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Waves Blender To Go BL-1070721 (46 pagina's) in de categorie Blender. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/46
English
SAFETY INSTRUCTIONS
General Information
1. Read these instructions carefully and keep them
in a safe place.
2. Only use the appliance as described in this
manual.
3. In case of damage caused by failure of not living
up to this manual the warranty will decay
immediately. The manufacturer/importer
accepts no liability for damages caused by
failure to not living up the manual, a negligent
use or use not in accordance with the
requirements of this manual.
4. This appliance is not intended for use by
persons (including children) when reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
5. Children should be supervised to ensure that
they do not play with the appliance.
6. Cleaning and user maintenance shall not be
made by children unless they are older than 8
years and supervised.
7. Keep the appliance and its cord out of reach of
children less than 8 years.
8. Always remove the power cord and let it cool:
Before moving the unit; Before the unit is stored;
Before you go mounting or dismantle parts;
Before cleaning or maintenance work; After use.
9. Only have the appliance repaired by a qualified
service centre.
10. Qualified service center: after-sales service of
the manufacturer/importer, which is qualified to
carry out repair to avoid any kind of danger. In
case of problems please return the appliance to
this service.
Electricity and heat
1. Before use, check that the mains power supply
voltage is the same and the voltage is the same
as the voltage indicated on the appliance.
2. Always plug the appliance into an earthed plug
socket.
3. Regularly check the power cord for damage.
4. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
5. Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions,
or is dropped or damaged in any manner. Return
appliance to manufacturer or the nearest
authorized service agent for examination, repair
or electrical or mechanical adjustment.
6. To remove the plug from the plug socket, pull
the plug. Do not pull the power cord.
7. Make sure the power cord does not come into
contact with hot surfaces.
Product specificaties
| Merk: | Waves |
| Categorie: | Blender |
| Model: | Blender To Go BL-1070721 |
Heb je hulp nodig?
Als je hulp nodig hebt met Waves Blender To Go BL-1070721 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Blender Waves
21 Mei 2023
20 November 2022
Handleiding Blender
- Blender Electrolux
- Blender Braun
- Blender Bosch
- Blender Philips
- Blender Panasonic
- Blender AEG
- Blender BEKO
- Blender Grundig
- Blender Inventum
- Blender Kenwood
- Blender Krups
- Blender Medion
- Blender Quigg
- Blender Siemens
- Blender Tefal
- Blender Unold
- Blender Adler
- Blender Afk
- Blender Akai
- Blender Alessi
- Blender Ambiano
- Blender Amica
- Blender Ariete
- Blender Bamix
- Blender Bartscher
- Blender Beem
- Blender Bellini
- Blender Beper
- Blender Bestron
- Blender Bifinett
- Blender Blaupunkt
- Blender Blendtec
- Blender Blokker
- Blender Bodum
- Blender Bomann
- Blender Boretti
- Blender Bourgini
- Blender Brabantia
- Blender Brandt
- Blender Breville
- Blender Buffalo
- Blender Bugatti
- Blender Domo
- Blender Domoclip
- Blender Dualit
- Blender Duronic
- Blender Efbe-schott
- Blender Emerio
- Blender Esge
- Blender Esperanza
- Blender Espressions
- Blender ETA
- Blender Eufy
- Blender Exquisit
- Blender Fagor
- Blender Farberware
- Blender Fritel
- Blender G3 Ferrari
- Blender Galanz
- Blender Gastroback
- Blender GE
- Blender George Foreman
- Blender Gorenje
- Blender Gourmetmaxx
- Blender Graef
- Blender H.Koenig
- Blender Haier
- Blender Hanseatic
- Blender Hendi
- Blender Hitachi
- Blender Homeland
- Blender Hotpoint
- Blender Hyundai
- Blender Innoliving
- Blender InstantPot
- Blender Kalorik
- Blender Kambrook
- Blender Kitchen Crew
- Blender KitchenAid
- Blender Klarstein
- Blender Koenic
- Blender Koenig
- Blender Kogan
- Blender Konig
- Blender Korona
- Blender Lagrange
- Blender Laica
- Blender Livington
- Blender Livoo
- Blender Logik
- Blender Maestro
- Blender Magic Bullet
- Blender Magimix
- Blender Maxwell
- Blender Melissa
- Blender Mesko
- Blender Mia
- Blender Micromaxx
- Blender Midea
- Blender Moa
- Blender Montana
- Blender Morphy Richards
- Blender Moulinex
- Blender MPM
- Blender Nedis
- Blender Ninja
- Blender Nordmende
- Blender Nova
- Blender Novamatic
- Blender Novis
- Blender NutriBullet
- Blender Philco
- Blender Primo
- Blender Princess
- Blender Privileg
- Blender ProfiCook
- Blender Proline
- Blender Redmond
- Blender Renkforce
- Blender Ritter
- Blender Rommelsbacher
- Blender Rotel
- Blender Russell Hobbs
- Blender Sage
- Blender Salton
- Blender Santos
- Blender Sanyo
- Blender Saro
- Blender Saturn
- Blender Schneider
- Blender Sencor
- Blender Severin
- Blender Shark
- Blender Sharp
- Blender Silvercrest
- Blender Smeg
- Blender Sogo
- Blender Solac
- Blender Solis
- Blender Springlane
- Blender Steba
- Blender Studio
- Blender Sunbeam
- Blender SupportPlus
- Blender Swan
- Blender Taurus
- Blender Team
- Blender Telefunken
- Blender Tesco
- Blender Tevion
- Blender Thane
- Blender Thomas
- Blender Tomado
- Blender Tower
- Blender Trebs
- Blender Tristar
- Blender Turbotronic
- Blender Turmix
- Blender Ufesa
- Blender Vitamix
- Blender Vitek
- Blender Vivax
- Blender Weasy
- Blender Westinghouse
- Blender Wmf
- Blender Wolf
- Blender Xsquo
- Blender Zelmer
- Blender Jata
- Blender JML
- Blender Jocel
- Blender JTC
- Blender Juiceman
- Blender OK
- Blender Omega
- Blender OneConcept
- Blender Orion
- Blender Oster
- Blender Clas Ohlson
- Blender Arzum
- Blender Black And Decker
- Blender Camry
- Blender Caso
- Blender Clatronic
- Blender Concept
- Blender Continental Edison
- Blender Cuisinart
- Blender ECG
- Blender Elba
- Blender Gallet
- Blender Hamilton Beach
- Blender Heinner
- Blender Imetec
- Blender Izzy
- Blender Khind
- Blender Mellerware
- Blender OBH Nordica
- Blender Optimum
- Blender Orbegozo
- Blender Profilo
- Blender Scarlett
- Blender Sinbo
- Blender Trisa
- Blender Vox
- Blender Wilfa
- Blender Champion
- Blender Monoprice
- Blender Catler
- Blender Drew & Cole
- Blender Nutrichef
- Blender AYA
- Blender Bella
- Blender Costway
- Blender Danby
- Blender King
- Blender Nevir
- Blender Svan
- Blender Ardes
- Blender Eldom
- Blender Grunkel
- Blender Lümme
- Blender Coline
- Blender Haeger
- Blender Waring Commercial
- Blender Brentwood
- Blender Chefman
- Blender DCG
- Blender Witt
- Blender Royal Catering
- Blender Apuro
- Blender Day
- Blender Zephir
- Blender Lenoxx
- Blender Riviera And Bar
- Blender Cosori
- Blender Baby Brezza
- Blender G21
- Blender Aurora
- Blender BORK
- Blender Orava
- Blender Signature
- Blender Dash
- Blender Cecotec
- Blender Prixton
- Blender Flama
- Blender Nesco
- Blender RGV
- Blender Comelec
- Blender Dynamic
- Blender Bar Maid
- Blender Ursus Trotter
- Blender Noveen
- Blender CRUX
- Blender AENO
- Blender Nutri Ninja
- Blender Łucznik
- Blender Emeril Lagasse
- Blender PowerXL
- Blender Globe
- Blender Beautiful
- Blender Tribest
- Blender Usha
- Blender Vitinni
- Blender Zwilling
- Blender Sam Cook
- Blender Zeegma
- Blender WestBend
- Blender Just Perfecto
- Blender Focus Electrics
- Blender Petra Electric
- Blender AvaMix
- Blender Robot Coupe
- Blender Inno-Hit
- Blender Jarden
- Blender JIMMY
- Blender Semak
- Blender Create
- Blender Girmi
- Blender BioChef
- Blender Power Air Fryer XL
- Blender Luvele
- Blender Back To Basics
- Blender Proappliances
- Blender Electroline
- Blender Imarflex
- Blender Mystery
Nieuwste handleidingen voor Blender
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024