Watts Wattstemp 850 - 860 - Flush mounting thermostat series Handleiding

Watts Thermostaat Wattstemp 850 - 860 - Flush mounting thermostat series

Lees hieronder de 📖 handleiding in het Nederlandse voor Watts Wattstemp 850 - 860 - Flush mounting thermostat series (4 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Advanced installer’s parameters menu

Wattstemp 850 and 860 Flush mounting thermostat series

External sensor

NTC type 10k Ω

at 25°C (ß = 3950)

In order to enter in the menu, press on the escape key during 10 seconds, the following display with the first

parameter must be appears:

- Once you entered in the menu, go to the parameter which you can change by using the keys (◄) or (►).

- Use the keys (+) or (-) to modify and confirm by pushing the (OK) key.

- To leave the parameter menu, go to the parameter “End” and press the (OK) key.

Note:

You could reload one parameter to the default value if you press the escape key when the parameter value blinks.

How to accede it

/Edit

Press 10 sec on the

key

/Edit

Parameters

Installer’s Advanced Menu

number

names

Description of the parameter

Factory value

Other possibility

LanG

Selection the language for the both parameters menus.

“GB”

English

“Fr”

French

Air.S

View of the measured values of the ambient sensor.

“__._”

OUT.S

View of the measured values of the floor (external)

sensor.

“__._”

FL.Lo

Lower limit of the floor temperature.

“no”

The lower

limitation is not

used

From 5°C to “FL.Hi”

FL.Hi

Upper limit of the floor temperature.

“no”

The upper

limitation is not

used

From “FL.Lo” to 37°C

regu

Selection of regulation type

“pwm”

Proportional

band (PWM)

“hys”

0,5°C Hysteresis (On/Off)

t.Cy

Selection of the proportional band duration in minutes

(cycle duration)

“10”

Ideal value for

all Electrical

floors heating

application.

You could increase this

value if the thermostat is

used for other heating

application (Oil Boiler...)

t.on

Minimal starting time in minutes

“002”

Adjustable “0” to T cy/2

t.off

Minimal resting time between 2 heating cycles in minutes

“002”

Adjustable “0” to T cy/2

Pwm.v

Value of the proportional band in °C

Note:

If the value of proportional band is too big the system

reactivity will be slower and could affect the steps of the

program.

“3.0”

Ideal value for

all Electrical

floors heating

application.

Adjustable “1” to “6.0”

A well insulated house

« 1.5°C»

A not insulated house

« 4°C »

Compensating value of the regulation

This value will need to be modified only if the thermostat

is perturbed by the heating element.

Generally never the case with electrical floor heating.

“00.0”

Adjustable “0” to

“14.0”

Increase this value if the

thermostat is too close to

the heating source.

Clr EEp

All parameters will be reloaded with the factory value.

Press on the (OK) key during few seconds.

End

To exit the installer‟s menu

Press on the (OK) to exit.

Menu de réglage avancé pour l’installateur

Thermostats encastrables pour régulation PRE série Wattstemp 850 et 860

Sonde externe

type CTN 10k Ω

à 25°C (ß = 3950)

Pour entrer dans le menu, appuyez sur la touche échappe pendant 10 secondes. L‟affichage suivant avec le

premier paramètre doit apparaître:

- Une fois dans le menu, sélectionnez le paramètre que vous souhaitez modifier avec les touches (◄) ou (►).

- Utilisez les touches (+) ou (-) pour le modifier et appuyez sur la touche (OK) pour le valider.

- Pour quitter le menu paramètre, allez jusqu‟au paramètre “End” et appuyez sur la touche (OK).

Note:

Vous pouvez recharger un paramètre avec la valeur usine en appuyant sur la touche échappe quand la valeur du

paramètre clignote.

Comment y accéder

/Edit

Appuyer 10

secondes sur la

touche

/Edit

Product specificaties

Merk:	Watts
Categorie:	Thermostaat
Model:	Wattstemp 850 - 860 - Flush mounting thermostat series

Heb je hulp nodig?

Als je hulp nodig hebt met Watts Wattstemp 850 - 860 - Flush mounting thermostat series stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag