Waring Commercial 700G Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Waring Commercial 700G (4 pagina's) in de categorie Blender. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed including the following:
1. READ ALL INSTRUCTIONS.
2. To protect against electrical hazards, do not immerse the blender
base in water or other liquid.
3. Close supervision is necessary when any appliance is used by or
near children.
4. Unplug from outlet when not in use, before putting on or taking off
parts, and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions or is dropped or damaged in any
manner. Return appliance to the nearest authorized service facility for
examination, repair or electrical or mechanical adjustment.
7. The use of attachments including canning jars not recommended by
the appliance manufacturer may cause hazards.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch hot
surfaces.
10. Keep hands and utensils out of container while blending to prevent
the possibility of severe personal injury and/or damage to the
blender. A rubber scraper may be used but must be used only
when the blender is not running.
11. Blades are sharp. Handle carefully.
12. If your blender utilizes a removable jar base and blade assembly, to
avoid injury never place cutting assembly cutting blades on base
without container properly attached.
13. Always operate blender with cover in place.
14. When blending hot liquids, remove center piece of two-piece cover
on those units supplied with this construction. See Hot Blending
Instructions
SAVE THESE INSTRUCTIONS
Service
Refer to the list of Authorized Service Centers enclosed with your
Waring blender for the name of the nearest Service Center, or
Write to:
Waring Factory Service Center
314 Ella T. Grasso Ave.
Torrington, CT 06790
(800) 269-6640
Ship blenders for repair to the above address or to an Authorized
Service Center. Do not ship to a Waring Sales Ofī˜Ÿce.
Note: If your application involves the processing of biologically
active materials we request that any items returned for service
be sterilized before being shipped. Such items must be clearly
identiī˜Ÿed as having been sterilized both by a tag on the item itself
and by a statement in the accompanying correspondence. Waring
will not accept delivery of any returns unless they are so identiī˜Ÿed.
Replacement parts for your own ā€œOut of Warrantyā€ repairs are
obtainable at the above address.
WARRANTY
Waring warrants every new WARING COMMERCIAL BLENDER to be free from
defects in material and workmanship for a period of one year from the date of
purchase when used with foodstuffs, non-abrasive liquids (other than detergents)
and non-abrasive semi-liquids, providing it has not been subject to loads in excess
of the indicated rating.
Under this warranty, the Waring Commercial Division will repair or replace any part
which, upon our examination, is defective in materials or workmanship, provided the
product is delivered prepaid to the Waring Service Center at Torrington, CT 06790,
or any Factory Approved Service Center.
This warranty does not: a) apply to any product which has become worn, defective,
damaged or broken due to use or due to repairs or servicing by other than the
Waring Service Center or a Factory Approved Service Center or due to abuse,
misuse, overloading or tampering; b) cover consequential damages of any kind.
This warranty gives you speciī˜Ÿc legal right, and you may have other rights which
vary from state to state so that certain limitations or exclusions set forth above may
not apply to you.
WARNING: This warranty is VOID if appliance is used on Direct Current (D.C.) or if
the appliance has not been registered.
WARING COMMERCIAL
314 Ella T. Grasso Ave.
Torrington, CT 06790
www.waringproducts.com
BLENDER
OPERATION MANUAL
10WC116188004589 RV19 1008
Operation
This piece of equipment is designed for the high speed blending,
pulping, mixing or reducing of animal tissue, vegetables, foodstuffs,
plant materials and other substances. A typical operating sequence is
as follows:
1. Add materials to be processed to container.
2. Place cover on container.
3. With the power switch on OFF position, place container on
blender. Be sure container is fully seated and the drive coupling
is properly engaged.
4. Set power switch to ON, Low or High position.
5. When ī˜Ÿnished processing, set power switch to OFF position.
6. Allow motor to come to a complete stop before removing
container from blender.
Note: Containers with removable bottoms have left-handed threads.
To tighten, turn in direction of molded arrow on underside of removable
bottom. When reassembling, be sure rubber gasket is positioned
between the container and the ī˜žange on the blade assembly.
Important
HOT BLENDING INSTRUCTIONS
To minimize possibility of scalding when blending hot materials, the
following precautions and procedures must be observed.
1. Limit amount of material processed to 1/2 pint.
2. Completely remove the center portion of the two-piece container
lid before starting motor. (This will allow venting of the rapidly
heated and expanding air present inside container when blender
is running.)
3. Always start blending lowest speed setting, then progress to
desired speed.
4. Never stand directly over blender when it is being started or while
it is running.
To Operate Timer Model Only
Blender
One Quart Capacity Speciļ¬cations
ā€¢ī˜Ratingsī˜ 120ī˜VACī˜ā€“ī˜50/60Hzī˜ā€“ī˜Singleī˜Phase
ī˜ ī˜ 230ī˜VACī˜ā€“ī˜50Hzī˜ā€“ī˜Singleī˜Phase
ā€¢ī˜Motorsī˜ ī˜Permanentlyī˜lubricatedī˜series-woundī˜universalī˜type
ā€¢ī˜Timerī˜ Selectiveī˜timerī˜cycleī˜fromī˜1ī˜toī˜180ī˜secondsī˜forī˜
automatic continuous running
ā€¢ī˜Basesī˜ ī˜Zincī˜dieī˜castingī˜withī˜epoxyī˜enamelī˜ī› nishī˜orī˜polishedī˜
stainless steel
ā€¢ī˜Containersī˜ ī˜Stainlessī˜steel,ī˜borosilicateī˜glass,ī˜polycarbonateī˜or
san plastic
ā€¢ī˜Cordī˜ ī˜6ī˜footī˜ā€“ī˜18ī˜gaugeī˜ā€“ī˜threeī˜conductorī˜groundedī˜cordī˜withī˜
strain relief
Grounding Instructions
ā€¢ī˜ ī˜Forī˜yourī˜protection,ī˜Waringī˜Commercialī˜Blendersī˜areī˜equippedī˜withī˜aī˜
3-conductor cordset.
ā€¢ī˜ ī˜120ī˜Voltī˜unitsī˜areī˜suppliedī˜withī˜aī˜moldedī˜3-prongī˜grounding-typeī˜plugī˜andī˜
should be used in combination with a properly connected grounding-type
outlet
If a grounding-type outlet is not available, an adapter, shown in Figure 2, may
be obtained to enable a 2-slot wall outlet to be used with a 3-prong plug.
Referring to Figure 3, the adapter must be grounded by attaching its
grounding lug under the screw of the outlet cover plate.
Before using an adapter, it must be determined that the outlet cover Caution:
plate screw is properly grounded. If in doubt, consult a licensed electrician.
Never use an adapter unless you are sure it is properly grounded.
Note: Use of an adapter is not permitted in Canada.
Green/Yellow: Earth Ground Blue: Neutral Brown: Live
MESURES DE PROTECTION IMPORTANTES
En utilisant des appareils Ʃlectriques, il faut observer des mesures de sƩcuritƩ
incluant ce qui suit :
1. LIRE TOUTES LES INSTRUCTIONS.
2 Pour se protƩger contre les dangers Ʃlectriques, ne pas plonger la base
du mĆ©langeur dans lā€™eau ou dans tout autre liquide.
3. Il faut une supervision Ʃtroite lorsque tout appareil est utilisƩ par ou
prĆØs dā€™enfants.
4. DĆ©brancher lā€™appareil de la prise lorsquā€™il nā€™est pas utilisĆ©, avant
dā€™installer ou de retirer des piĆØces et avant tout nettoyage.
5. Ɖviter tout contact avec les piĆØces mobiles.
6. Ne pas faire fonctionner tout appareil ƩlectromƩnager avec un cordon
ou une ī˜Ÿche endommagĆ©(e), ou si lā€™appareil fonctionne mal, ou est
ƩchappƩ ou endommagƩ de quelque faƧon que ce soit. Retourner
lā€™appareil au centre de service autorisĆ© le plus proche pour quā€™il soit
vĆ©riī˜ŸĆ©, rĆ©parĆ© ou que les Ć©lĆ©ments Ć©lectriques ou mĆ©caniques soient
ajustƩs.
7. Lā€™utilisation de tout accessoire, incluant les contenants de mise
en conserve, non recommandĆ© par le fabricant de lā€™appareil peut
provoquer des dangers.
8. Ne pas lā€™utiliser Ć  lā€™extĆ©rieur.
9. Ne pas laisser le cordon pendre au bord de la table ou du comptoir ni
toucher des surfaces chaudes.
10. Garder les mains et les ustensiles loin du contenant en mƩlangeant
pour Ʃviter la possibilitƩ de blessures graves et/ou des dommages au
mƩlangeur. On peut utiliser un grattoir en caoutchouc, mais seulement
lorsque le mƩlangeur ne fonctionne pas.
11. Les lames sont tranchantes. Manipuler avec soin.
12. Si votre mƩlangeur utilise un assemblage de lame et de base du
contenant amovible pour Ć©viter les blessures ne jamais placer les lames
de coupe de lā€™assemblage de coupe sur la base sans le contenant bien
installƩ.
13. Toujours faire fonctionner le mƩlangeur avec le couvercle en place.
14. En mĆ©langeant les liquides chauds, retirez la piĆØce centrale du
couvercle Ć  deux piĆØces de ces appareils fournies avec cette
construction. Reportez-vous aux instructions de mƩlanges chauds.
CONSERVER CES INSTRUCTIONS
SERVICE
Reportez-vous Ơ la liste de centres de service autorisƩs incluse avec
votre mƩlangeur Waring pour le nom du centre de service le plus
prĆØs, ou
Ɖcrivez Ơ : Waring Factory Service Center
314 Ella T. Grasso Ave.
Torrington, CT 06790
(800) 269-6640
ExpĆ©diez les mĆ©langeurs pour rĆ©paration Ć  lā€™adresse ci-haut ou Ć 
un centre de service autorisĆ©. Nā€™expĆ©diez pas au bureau des ventes
Waring.
Remarque : Si votre application inclut le traitement de matƩriaux
biologiquement actifs, nous demandons que tous les articles retournƩs
pour leur entretien soient stƩrilisƩs avant leur expƩdition. Ces articles
doivent ĆŖtre clairement identiī˜ŸĆ©s comme stĆ©rilisĆ©s par une Ć©tiquette
sur lā€™article mĆŖme et par une dĆ©claration dans la correspondance
dā€™accompagnement. Waring nā€™acceptera pas de livraison dā€™articles
retournĆ©s Ć  moins quā€™ils ne soient identiī˜ŸĆ©s de cette maniĆØre.
Vous pouvez obtenir des piĆØces de rechange pour vos propres
rĆ©parations Ā« hors garantie Ā» Ć  lā€™adresse prĆ©cĆ©dente.
GARANTIE
Waring garantit tout nouveau MƉLANGEUR WARING COMMERCIAL libre de tous
dĆ©fauts de matĆ©riau et de main dā€™Å“uvre pendant une pĆ©riode dā€™un an Ć  partir de la date
dā€™achat lorsquā€™il est utilisĆ© avec des aliments, des liquides non-abrasifs (autres que des
dĆ©tergents) et des semi-liquides non-abrasifs, pourvu quā€™il ne soit pas soumis Ć  des
charges dƩpassant la valeur nominale indiquƩe.
Sous cette garantie, la division commerciale Waring rĆ©parera ou remplacera toute piĆØce
qui, suite Ć  notre examen, est dĆ©fectueuse en termes de matĆ©riaux ou de main dā€™Å“uvre si
le produit est livrƩ prƩpayƩ au centre de service Waring Ơ Torrington, CT 06790, ou Ơ tout
centre de service approuvƩ en usine.
Cette garantie ne : a) sā€™applique pas Ć  tout produit qui est devenu usĆ©, dĆ©fectueux,
endommagƩ ou brisƩ suite Ơ une utilisation ou Ơ cause de rƩparations ou de rƩparations
par dā€™autres que le centre de service Waring ou un centre de service approuvĆ© en usine
ou Ć  cause dā€™abus, de mauvaise utilisation, de surcharge ou dā€™altĆ©ration, b) couvre pas
les dommages consƩcutifs de quelque sorte que ce soit.
Cette garantie vous donne des droits lĆ©gaux prĆ©cis, et vous pouvez aussi avoir dā€™autres
droits qui varient dā€™un Ć©tat Ć  lā€™autre. Il se peut donc que certaines limitations ou
exclusions indiquĆ©es ne sā€™appliquent pas dans votre cas.
AVERTISSEMENT : Cette garantie est ANNULƉE si lā€™appareil est utilisĆ© sur un courant
continu (c.c.) ou si lā€™appareil nā€™a pas Ć©tĆ© enregistrĆ©.
WARING COMMERCIAL
314 Ella T. Grasso Ave.
Torrington, CT 06790
www.waringproducts.com
MANUEL Dā€™UTILISATION
DU MƉLANGEUR
10WC116188004589 RV19 1008


Product specificaties

Merk: Waring Commercial
Categorie: Blender
Model: 700G

Heb je hulp nodig?

Als je hulp nodig hebt met Waring Commercial 700G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Blender Waring Commercial

Handleiding Blender

Nieuwste handleidingen voor Blender