Wagner HT770 Handleiding
Wagner
Hittepistool
HT770
Lees hieronder de 📖 handleiding in het Nederlandse voor Wagner HT770 (32 pagina's) in de categorie Hittepistool. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/32
EnglishFrançaisEspañol
0908 • Form No. 0283939J
Heat Gun Model 750
Hot Air Paint Removal Tool
Owner’s Manual
Read all instructions and product labels. When using electrical tools, follow all
precautions to reduce the risk of re, electric shock, and other personal injury.
1-800-727-4023
Wagner Technical Service
http://www.wagnerspraytech.com
Register your product online at:
Need help? Call us first for answers fast.
Call Wagner toll-free if you have any comments
or problems with this Wagner product.
1770 Fernbrook Lane, Plymouth, MN 55447
56M8
MHT Products, Inc.
by Wagner Spray Tech
1770 Fernbrook Lane
Plymouth, MN 55447
1-800-727-4023
English
2
General Description
This heat gun is a quality power tool. Like any power tool, it can be dangerous when
misused. Read the following instructions carefully and follow all safety precautions. It is
the responsibility of the owner to use the heat gun properly.
Specications
Housing: ........................................................................................................ Die cast metal
Wattage: ...................................................................... 1680 Watts. Operates on 120 VAC
Heat Output: ............................................................................... 750ºF to 1000°F nominal.
BTUs ............................................................................. Approximately 5700 BTUs on high
Uses
• Soften paint, caulking and putty for easier removal
• Soften adhesives to help remove oor tiles
• Bend plastic pipes
• Shrink tubing for electrical work
• Shrink plastic lm for wrapping or weatherproong
• Loosen rusted nuts, bolts and ttings
Parts listing
2
1
3
4
5
6
7
8
9
10
11
12
13
14
Item Number Description Qty.
1 0283481 Shield ............................... 1
2 9820906 Washer ............................. 1
3 9803111 Screw ............................... 1
4 0283482 Nozzle .............................. 1
5 9803111 Screw ............................... 1
6 9820906 Washer ............................. 1
7 0283490 Screen .............................. 1
Item Number Description Qty.
8 0283492 Plate ................................. 1
9 0293491 Retaining ring ................... 1
10 9804924 Screw ............................... 1
11 0283485 Mica sheet ....................... 1
12 0283292 Element assembly ............ 1
13 0283484 Stand................................ 1
14 --------- Basic unit assembly ......... 1
English
3
Important Safety Information • Read all safety information
before operating the equipment. Save these instructions
To reduce the risks of re or explosion, electrical shock and the injury to persons,
read and understand all instructions included in this manual. Be familiar with the
controls and proper usage of the equipment.
Indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
HAZARD: POISON
Extreme care should be taken when stripping paint. The peelings, residue and vapors of
paint may contain lead, which is poisonous. Any paint applied to homes before 1950 is
likely to contain lead. Any paint manufactured before 1977 may contain lead. Once the
paint is deposited on surfaces, hand-to-mouth contact can result in the ingestion of lead.
Exposure to even low levels of lead can cause irreversible brain and nervous system
damage. Young and unborn children are particularly vulnerable to lead poisoning.
Before beginning any paint removal process you should determine whether the paint
you are removing contains lead. This can be done by your local health department or
by a professional who uses a paint analyzer to check the lead content of the paint to be
removed. Lead-based paint should only be removed by a professional and should not be
removed using a heat gun.
PREVENTION:
1. Move the work piece outdoors. If this is not possible, keep the work area well
ventilated. Open the windows and put an exhaust fan in one of them. Be sure the
fan is moving the air from inside to outside.
2. Remove or cover any carpets, rugs, furniture, clothing, cooking utensils and air
ducts.
3. Place drop cloths in the work area to catch any paint chips or peelings. Wear
protective clothing such as extra work shirts, overalls and hats.
4. Work in one room at a time. Furnishings should be removed or placed in the
center of the room and covered. Work areas should be sealed off from the rest of
the dwelling by sealing doorways with drop cloths.
5. Children, pregnant or potentially pregnant women and nursing mothers should not
be present in the work area until the work is done and all cleanup is complete.
6. Wear a dust respirator mask of a dual lter respirator mask for dust and fumes
which has been approved by the Occupational Safety and Health Administration
(OSHA) the National Institute of Safety and Health (NIOSH), or the United States
Bureau of Mines. These masks and replaceable lters are readily available at
major hardware stores. Be sure that the mask ts properly. Beards and facial hair
may keep masks from sealing properly. Change the lters often. Disposable paper
masks are not adequate.
7. Use caution when operating the heat gun. Keep the heat gun moving as excessive
heat will generate fumes which can be inhaled by the operator.
8. Keep food and drink out of the work area. Wash hands, arms and face and rinse
mouth before eating or drinking. Do not smoke or chew gum or tobacco in the work
area.
9. Clean up all removed paint and dust by wet mopping the oors. Use a wet cloth
to clean all walls, sills and any other surface where paint dust is clinging. Do
not sweep, dry dust or vacuum. Use a high phosphate detergent of trisodium
phosphate (TSP) to wash and mop areas.
10. At the end of each work session, put the paint chips and debris in a double plastic
bag, close it with tape or twist ties and dispose of properly.
11. Remove protective clothing and work shoes in the work area to avoid carrying dust
into the rest of the building. Wash work clothes separately. Wipe shoes off with
a wet rag and then wash it with the work clothes. Wash hair and body thoroughly
with soap and water.
Product specificaties
| Merk: | Wagner |
| Categorie: | Hittepistool |
| Model: | HT770 |
Heb je hulp nodig?
Als je hulp nodig hebt met Wagner HT770 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Hittepistool Wagner
31 Maart 2024
18 April 2023
16 April 2023
7 April 2023
23 Maart 2023
18 Maart 2023
8 Februari 2023
2 November 2022
Handleiding Hittepistool
- Hittepistool Bosch
- Hittepistool Panasonic
- Hittepistool AEG
- Hittepistool DeWalt
- Hittepistool Argo
- Hittepistool Einhell
- Hittepistool Ferm
- Hittepistool G3 Ferrari
- Hittepistool Gude
- Hittepistool Hikoki
- Hittepistool Hitachi
- Hittepistool Holzmann
- Hittepistool Kress
- Hittepistool Makita
- Hittepistool Metabo
- Hittepistool Milwaukee
- Hittepistool Parkside
- Hittepistool Powerplus
- Hittepistool Qlima
- Hittepistool Ryobi
- Hittepistool Skil
- Hittepistool Stanley
- Hittepistool Steinel
- Hittepistool Trotec
- Hittepistool Vonroc
- Hittepistool Weller
- Hittepistool Jocel
- Hittepistool Ozito
- Hittepistool Black And Decker
- Hittepistool Steren
- Hittepistool Meec Tools
- Hittepistool Rapid
- Hittepistool Genesis
- Hittepistool Fieldmann
- Hittepistool Proxxon
- Hittepistool Porter-Cable
- Hittepistool MSW
- Hittepistool Craftsman
- Hittepistool Alpha Tools
- Hittepistool Hazet
- Hittepistool Meister Craft
- Hittepistool Wagner SprayTech
- Hittepistool Challenge Xtreme
- Hittepistool Einhell Bavaria
- Hittepistool Bavaria By Einhell
Nieuwste handleidingen voor Hittepistool
19 November 2024
19 November 2024
17 November 2024
16 Oktober 2024
17 Juni 2024
10 April 2024
10 April 2024
10 April 2024
10 Januari 2024
19 December 2023