Wagner SprayTech HT3500 Handleiding

Wagner SprayTech varmepistol HT3500

Lees hieronder de 📖 handleiding in het Nederlandse voor Wagner SprayTech HT3500 (32 pagina's) in de categorie varmepistol. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

EnglishFrançaisEspañol

0908 • Form No. 0503703C

Heat Gun

HT3500

Owner’s Manual

Read all instructions and product labels. When using

electrical tools, follow all precautions to reduce the

risk of re, electric shock, and other personal injury.

1-800-727-4023

Wagner Technical Service

http://www.wagnerspraytech.com

Need help? Call us first for answers fast.

Call Wagner toll-free if you have any comments

or problems with this Wagner product.

1770 Fernbrook Lane, Plymouth, MN 55447

56M8

English

General Description

This heat gun is a quality power tool. Like any power tool, it can be dangerous when

misused. Read the following instructions carefully and follow all safety precautions. It is

the responsibility of the owner to use the heat gun properly.

Specications

Housing: ............................Engineered high-impact corrosion and heat-resistant polymers

Wattage: ...............................................1500 watts on highest setting, 150 watts on lowest

Heat Output: ......

Approximately approximately 1350°F on highest setting, 250°F on lowest

BTU: ..............................................................Approximately 5100 BTUs on highest setting

Weight: .............................................................................................................. 1.5 pounds

Uses

• Soften paint, caulking and putty for easier removal

• Soften adhesives to help remove oor tiles

• Bend plastic pipes

• Shrink tubing for electrical work

• Shrink plastic lm for wrapping or weatherproong

• Loosen rusted nuts, bolts and ttings

Touch pad

The electronic touch pad gives you a wide temperature range to choose from, depending

upon the type of project.

HIGH

LOW

1350

1250

1150

1050

950

850

750

650

550

450

350

250

POWER

COOL

HIGH

LOW

SELECT

Power

button

Temperature

selector

Select

button

Mode

indicator

Temperature

indicator (6)

IMPORTANT!

The temperature

indicators will light up

sequentially as you

increase the

temperature. The

lighted indicator

farthest to the right will

reflect the current

temperature setting.

Power button: Turns the heat gun ON and OFF

Select button: Determines the temperature range and fan speed of the heat

gun, or switches the heat tool into cool down mode.

Temperature selectors: Sets the temperature within the HIGH or LOW temperature

ranges

Mode indicator: Shows the temperature range in which you are operating

Temperature indicator: Shows the current heat output of the heat gun

English

Important Safety Information • Read all safety information

before operating the equipment. Save these instructions

To reduce the risks of re or explosion, electrical shock and the injury to persons,

read and understand all instructions included in this manual. Be familiar with the

controls and proper usage of the equipment.

Indicates a hazardous situation which, if not avoided, could result in death or

serious injury.

HAZARD: POISON

Extreme care should be taken when stripping paint. The peelings, residue and vapors of

paint may contain lead, which is poisonous. Any paint applied to homes before 1950 is

likely to contain lead. Any paint manufactured before 1977 may contain lead. Once the

paint is deposited on surfaces, hand-to-mouth contact can result in the ingestion of lead.

Exposure to even low levels of lead can cause irreversible brain and nervous system

damage. Young and unborn children are particularly vulnerable to lead poisoning.

Before beginning any paint removal process you should determine whether the paint

you are removing contains lead. This can be done by your local health department or

by a professional who uses a paint analyzer to check the lead content of the paint to be

removed. Lead-based paint should only be removed by a professional and should not be

removed using a heat gun.

PREVENTION:

1. Move the work piece outdoors. If this is not possible, keep the work area well

ventilated. Open the windows and put an exhaust fan in one of them. Be sure the

fan is moving the air from inside to outside.

2. Remove or cover any carpets, rugs, furniture, clothing, cooking utensils and air

ducts.

3. Place drop cloths in the work area to catch any paint chips or peelings. Wear

protective clothing such as extra work shirts, overalls and hats.

4. Work in one room at a time. Furnishings should be removed or placed in the

center of the room and covered. Work areas should be sealed off from the rest of

the dwelling by sealing doorways with drop cloths.

5. Children, pregnant or potentially pregnant women and nursing mothers should not

be present in the work area until the work is done and all cleanup is complete.

6. Wear a dust respirator mask of a dual lter respirator mask for dust and fumes

which has been approved by the Occupational Safety and Health Administration

(OSHA) the National Institute of Safety and Health (NIOSH), or the United States

Bureau of Mines. These masks and replaceable lters are readily available at

major hardware stores. Be sure that the mask ts properly. Beards and facial hair

may keep masks from sealing properly. Change the lters often. Disposable paper

masks are not adequate.

7. Use caution when operating the heat gun. Keep the heat gun moving as excessive

heat will generate fumes which can be inhaled by the operator.

8. Keep food and drink out of the work area. Wash hands, arms and face and rinse

mouth before eating or drinking. Do not smoke or chew gum or tobacco in the work

area.

9. Clean up all removed paint and dust by wet mopping the oors. Use a wet cloth

to clean all walls, sills and any other surface where paint dust is clinging. Do

not sweep, dry dust or vacuum. Use a high phosphate detergent of trisodium

phosphate (TSP) to wash and mop areas.

10. At the end of each work session, put the paint chips and debris in a double plastic

bag, close it with tape or twist ties and dispose of properly.

11. Remove protective clothing and work shoes in the work area to avoid carrying dust

into the rest of the building. Wash work clothes separately. Wipe shoes off with

a wet rag and then wash it with the work clothes. Wash hair and body thoroughly

with soap and water.

Product specificaties

Merk:	Wagner SprayTech
Categorie:	varmepistol
Model:	HT3500
Bredde:	88 mm
Dybde:	243 mm
Strømkilde:	AC
Høyde:	320 mm
Produktfarge:	Gult
Inngangseffekt:	1500 W
Maximum airflow:	- l/min
Driftstemperatur (min.):	121 °C
Driftstemperatur (maks.):	732 °C