Vitek VTC-C2BHSE Handleiding

Vitek Bewakingscamera VTC-C2BHSE

Lees hieronder de 📖 handleiding in het Nederlandse voor Vitek VTC-C2BHSE (32 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

FEATURES:

• 1/3” Panasonic Progressive Scan CMOS Sensor

• 2.1MegaPixel With full 1080p/720p HD-SDI (SMPTE 292M) / EX-SDI

Output

• Smart Motion Zoom tracks motion, then intelligently zooms into that area of

the frame

• True Day/Night with Dual Filter Switch

• Small scale design to fit in 5” dome enclosures such as the Pelco® DF5

Housing

• Secondary Video (CVBS) Output

• Fully programmable True WDR (Dual Scan) at 30fps

• Sensitivity of 0.0005 Lux

• Advanced OSD Functions: Smart Motion Zoom, Focus Assist, Motion

Detection, Privacy Mask, Defog, D-Zoom(~8x), Sens-up (~x32), BLC/ HLC,

Title Set, Pixel Defect Compensation, Lens Shade Compensation

• 100% Pure Digital Transmission of video data

• Extended Range Beyond 1000’ with RG59U 95% Copper Braid Coax

• 12VDC / 24VAC Dual Voltage Operation

VTC-C2BHSE

2.1MP EX-SDI/HD-SDI Smart

WDR Camera

VITEK

Safety Precaution

CAUTION: TO REDUCE THE RISK OF ELECTICAL

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

To prevent electrical shock and risk of fire hazards, do not expose this unit

to rain or moisture and only use specified power source..

Warning :

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

their own expense.

Caution :

Any changes or modifications in construction of this device which are not expressly

approved by the party responsible for compliance could void the user's authority

to operate the equipment.

Main power quality should be that of a typical commercial environment. If the user

of the model requires continued operation during power interruptions, it is

recommended that the device be powered from an uninterruptible power supply

(UPS).

The symbol is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature

accompanying the unit.

The symbol is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electrical shock.

Safety Precaution

NOTICE

• The image used in this instruction manual are processed to help

comprehension and may differ from actual video of the camera.

• Avoid installing in areas where shock or vibration may occur.

• Pay attention to safety when running the connection cables and

make sure that the cables are not subject to heavy loads, kinks,

moisture or damage.

• Never open the device (no user serviceable parts inside). The

warranty becomes void if repairs are undertaken by

unauthorized persons.

• Maintenance and repair have to be carried out only by authorized

service centers.

• Use only a mild detergent to clean the housing.

• The camera should never be operated beyond the technical

specifications. This can lead to damaging the device and void

the warranty.

• The camera should never be operated in water.

Product specificaties

Merk:	Vitek
Categorie:	Bewakingscamera
Model:	VTC-C2BHSE

Heb je hulp nodig?

Als je hulp nodig hebt met Vitek VTC-C2BHSE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Bewakingscamera Vitek

Vitek VTD-HOCMD2CH Handleiding

10 Mei 2023

Vitek VTC-C2BHSE Handleiding

29 April 2023

Vitek VTC-HOCRBDE4F Handleiding

29 April 2023

Vitek VTC-BHOC6R4F Handleiding

18 April 2023

Vitek VT-PTZ230HD Handleiding

7 April 2023

Vitek Spire VT-SRL904 Handleiding

1 Maart 2023

Vitek Spire VT-SRL908 Handleiding

15 Oktober 2022

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Honeywell HC35WE5R3 Handleiding

20 December 2024

Honeywell Performance H4W8PER2V Handleiding

20 December 2024

Hikvision DS-2CE12KF3T-LS Handleiding

18 December 2024

Hikvision DS-2CE78D0T-LXTS/A Handleiding

18 December 2024

TP Link VIGI C450 Handleiding

18 December 2024

Hikvision DS-2CE76U0T-LPF Handleiding

18 December 2024

Hikvision DS-2CE78U0T-LF Handleiding

18 December 2024

Hikvision DS-2CE16U0T-LPF Handleiding

18 December 2024

Hikvision DS-2CE72KF3T-LSYE Handleiding

18 December 2024

Hikvision DS-2CE17U0T-LF Handleiding

18 December 2024