Vitek VT-3582 BK Handleiding

Vitek Radio VT-3582 BK

Lees hieronder de 📖 handleiding in het Nederlandse voor Vitek VT-3582 BK (2 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

HIGH OUTPUT LED TAPE

Installation Guide

V2 .0

Caution: Please read this guide carefully before installing Lyyt LED tape

Damage caused by incorrect application is not covered by the warranty

Installation

Lyyt high output LED tape is supplied on 5m reels and operates from a 24Vdc power supply.

Installation should be carried out by competent electrical installers, observing the relevant electrical safety procedures.

The tape has a self-adhesive backing to allow it to be easily attached to a clean, non-porous surface.

Where less than 5m of tape is needed, there are solder points as shown below, where the tape may be cut to size. These

cut points will be at 5cm intervals. In order to re-connect to another length of tape after cutting, strip away the epoxy

coating at the solder points and solder a wire from “+” to “+” and a wire from “ ” to “ ” as shown below. - -

Some accessories are supplied with the tape reel for this purpose or alternatively, connection clips may also be used Lyyt

to join lengths of tape (156.135UK 156.140UK). In order to retain weather-proofing, it is advised to seal the cuts and –

joints with silicone glue.

Each 5m reel of single colour LED tape is fitted with a 2.1mm DC jack socket for power input for easy connection to a

power supply. This connector may be removed and stripped for bare wire connection if a 2.1mm jack is not fitted to the

power supply.

If the power supply has enough capacity to power more than one reel, another reel can be connected to the end of the

first reel via the 2.1mm DC jack plug.

For Lyyt high output LED tape, it is recommended to link no more than 15m of tape in sequence .

Using a separate wire to loop “+” and “ ” back to the power supply will help to avoid dimming at the far end through -

voltage drop.

To connect beyond these lengths, a parallel wire must be run from the power supply to the further reels of tape.

High Output LED Tape Installation Guide

Power requirements

It is imperative that the power supply should have higher than the rated capacity in Amps (A) for the current required to

power the length(s) of LED tape installed. Please see the table below for reference.

Tape length

10m

15m

20m

25m

30m

Current

10A

12A

Suggested PSU

153.759UK

153.760UK

153.761UK

153.762UK

153.763UK

153.764UK

Lyyt high output LED strips can also be operated with Lyyt single colour 12/24V controllers, amplifiers or dimmers.

Specifications

Stock ref.

156.776UK

156.777 UK

156.778UK

Colour

Warm white (3000K)

Natural white (6000K)

Cool white (6000K)

Number of LEDs

120/m

Beam angle

140°

Cut intervals

5cm

Reel length

LED type

Epistar™ SMD3528

LED spacing

8.3 mm

IP rating

IP65

Power consumption / metre

9.6W

Luminous flux (Lumens per metre)

720lm/m

Light intensity per LED

2400mcd

Cross-section

10.5 x 2.55mm

Weight

210g

Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or

Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life .

The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.

Product specificaties

Merk:	Vitek
Categorie:	Radio
Model:	VT-3582 BK
Kleur van het product:	Zwart
Gewicht:	862 g
Breedte:	235 mm
Diepte:	63 mm
Hoogte:	132 mm
Type aansluitplug:	3,5 mm
Accu/Batterij voltage:	1.5 V
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	3 W
Aantal ingebouwde luidsprekers:	1
Ondersteund aantal accu's/batterijen:	3
Hoofdtelefoonuitgangen:	1
FM-radio:	Ja
Ingang stroom:	Ja
Soort tuner:	Analoog
Ingangsspanning:	220 V
Uitgangsvermogen:	350 mW
MP3 afspelen:	Nee
Ondersteunde frequentiebanden:	FM, MW, SW
Radio:	Draagbaar
Compatibele batterij grootte:	D
Apple docking-compatibiliteit:	Niet ondersteund
FM-band:	87 - 108 MHz
AC-ingangsfrequentie:	50 Hz