Viking VK20 Handleiding

Viking Niet gecategoriseerd VK20

Lees hieronder de 📖 handleiding in het Nederlandse voor Viking VK20 (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 243 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

www. .co.ukmetaldetectors

Metal Detectors

1 Angela Street

Mill Hill, Blackburn

BB2 4DJ

t: +44 (0)1254 55887

f: +44 (0)1254 676901

e: viking@metaldetectors.co.uk

User Manual

Thank you for purchasing a VK-Series

detector from VIKING. This is one of a family

of microprocessor driven metal detectors

that are very simple to use yet provide

excellent performance. The VK20 is a motion

metal detector and the VK30 also provides

non-motion operation, which assists with the

accurate pinpointing of targets.

Please take time to read this booklet. It will guide

you through each of the available features to

ensure you get the best out of your detector.

The term 'motion' used above simply means the

search head needs to be kept moving in order to

detect metal items. This allows the

microprocessor to analyse the received signals

and discriminate against poor quality metals.

When a suitable target is detected, an audible

'beep' is heard either from the loudspeaker or

headphones (if connected).

Getting Started

1. Unpack The Detector

There are two main sections. The 'S' shaft, onto

which is mounted the control box, armrest and

detector stand, and the lower shaft with the

search head.

2. Assemble The Detector

Note the spring button clip protruding from near

the top end of the lower shaft. Slide the lower

shaft into the 'S' shaft, wrapping the cable

snugly, but not tightly, round the shaft. When

correctly aligned the spring button clip will click

into 1 of the 3 holes in the 'S' shaft.

3. Tighten the coupling

Turn the coupling to the 'lock' position as

indicated by the arrow. This makes a rigid

connection between the two parts of the shaft.

4. Insert Battery

The detector takes a single PP3 (alkaline) 9V

battery. This is placed in the battery

compartment on the back of the control box.

ENSURE THE BATTERY IS INSERTED THE

CORRECT WAY ROUND

Push the drawer back into the detector until it

clicks. Please note the drawer can only be

inserted the one way.

VK20 Display Panel

1. Off / On - Sensitivity Control

2. Discrimination Control

3. Detector Display

4. Inland / Beach Switch

VK20 & VK30

www. .co.ukmetaldetectors

Metal Detectors

1 Angela Street

Mill Hill, Blackburn

BB2 4DJ

t: +44 (0)1254 55887

f: +44 (0)1254 676901

e: viking@metaldetectors.co.uk

VK30 Display Panel

1. Off / On - Sensitivity Control

2. All Metal / Discrimination Control

3. Detector Display

4. Inland / Beach Switch Target ID

5. Pinpoint / Retune Pushbutton

1. Off / On - Sensitivity Control

This control has two functions. When turned fully

anticlockwise the detector is switched off.

Turning the control clockwise will initially turn the

machine on. Turning the control fur ther

clockwise will increase the sensitivity setting of

the detector. Maximum sensitivity is achieved

when the control is turned fully clockwise. The

ability of the detector to locate small or deep

objects will increase with the sensitivity setting.

In some environmental conditions the detector

may produce false beeps which do not indicate a

target. In this case it is recommended that the

sensitivity setting is reduced until the problem is

resolved.

When this control is adjusted, the display unit

indicates the current setting.

2. Discrimination Control

On the VK30 only: this control has two functions.

When turned fully anticlockwise it will click and

switch the detector into All-Metal mode. Turning

the control slightly clockwise will switch the

detector into Motion mode and from this point

the control will work exactly as on the VK20.

This control is used to discriminate against

unwanted metal targets. When turned fully

anticlockwise, all metal targets will be found. The

further the control is turned clockwise the more

discriminating the detector will be. When turned

fully clockwise only the most conductive metals

(Silver and Copper) will be found. All other

targets will be ignored. For general detector use

it is not recommended to search with the

discrimination control set to full as you may miss

the most valuable targets. Items such as gold

rings are not as conductive as a piece of copper

and will be missed if the discrimination control is

set too high.

When this control is adjusted, the display unit

indicates the current setting. The number

displayed relates to the minimum target ID

number that will give an audio signal when

detected

Sensitivity Adjust

Audio Discrimination Adjust

www. .co.ukmetaldetectors

Metal Detectors

1 Angela Street

Mill Hill, Blackburn

BB2 4DJ

t: +44 (0)1254 55887

f: +44 (0)1254 676901

e: viking@metaldetectors.co.uk

3. Beach / Inland Switch

This switch is used for detecting on the beach.

Pressing the button once will switch the detector

into beach mode. Pressing it again will switch

back into inland mode. The display will show 'B'

when beach mode is selected. When using this

mode the detector will not detect iron objects,

but will still provide an audio signal and target ID

for non-ferrous metals.

Note that the detector will always reset to inland

mode when the power is switched off

4. Target ID

This part of the display provides an indication of

the identity of each target. When the search

head is swept past a target a number, between 0

and 95, is shown on the display and the bar fills

up to a point. If only one or two blocks appear

and the number that appears is low then the

object is likely to be iron. If seven or eight blocks

are shown and the number is high then the

object is likely to be of high conductivity.

Some Typical Targets:

5. All Metal Mode (VK30 only)

Turning the discrimination control fully anticlock-

wise switches the detector into All Metal mode.

This mode allows more accurate pinpointing of

the target as the search head does not need to

be kept moving to detect.

6. Pinpoint / Retune Button (VK30 only)

When in Motion mode, pressing and holding this

button switches the detector into All Metal mode.

When detecting in All Metal mode, holding this

button switches the detector to Motion mode and

also retunes the threshold tone. When the

detector is in Non-Motion mode, whether chosen

by the discrimination control or the pushbutton,

the display shows a 'P'. The display gives the

target ID of the object as in motion mode. Please

note that although there is increased sensitivity

when using non-motion mode, the display is not

capable of correct ID for small signals that would

not be detected in Motion mode.

7. Battery Check

The detector continually monitors the condition

of the battery. As the battery power begins to

fade, the blocks used to indicate target ID or

control position reduce in size. When the blocks

show up as a thin line the battery should be

replaced.

Detection in Beach Mode

Small Iron (Nail)

Non-Motion Detection

Modern 5p

Victorian (Silver) Shilling

Battery Fading

Replace Battery

Product specificaties

Merk:	Viking
Categorie:	Niet gecategoriseerd
Model:	VK20

Heb je hulp nodig?

Als je hulp nodig hebt met Viking VK20 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Viking

Viking DVA-500A Handleiding

1 Juni 2023

Viking D22 Handleiding

26 Mei 2023

Viking VBO1830S Handleiding

10 Mei 2023

Viking PDDP242SS Handleiding

30 April 2023

Viking PDDP242 Handleiding

28 April 2023

Viking RD30BG6SS Handleiding

23 April 2023

Viking VSP30 Handleiding

17 April 2023

Viking DCCE1810SS Handleiding

17 April 2023

Viking VBO1811 Handleiding

16 April 2023

Viking VSBO2402SS Handleiding

24 Maart 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Protector AS-5030.3 V2 Handleiding

21 December 2024

Sabrent AU-MMCW Handleiding

21 December 2024

Sabrent AU-2X35 Handleiding

21 December 2024

Sabrent CB-RS232 Handleiding

21 December 2024

Owon 500W Handleiding

21 December 2024

Owon 300W Handleiding

21 December 2024

Sabrent SB-RKTQ4-1TB Handleiding

21 December 2024

Sabrent SB-RKTQ-1TB Handleiding

21 December 2024

Sabrent SB-ROCKET-1TB Handleiding

21 December 2024

Sabrent SB-HTSS Handleiding

21 December 2024