Viking DVA-500A Handleiding

Viking Niet gecategoriseerd DVA-500A

Lees hieronder de 📖 handleiding in het Nederlandse voor Viking DVA-500A (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 206 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
• ACD/UCD announcements
• Intercept announcement
• Announce-only applications
• School closings
• Ski reports
• Night answer
• Wake-up calls
• Bank rates/commodity prices
• Any application where information must be
repeated continuously and may require frequent
updating
• Replace existing tape and drum recorders
• Up to 1 minute of record time
• Remotely recordable
• Locally recordable using a standard carbon
handset or tapeplayer
• Selectable ring delay
• Detects CPC signal and disconnects
• Callers may be transferred after the
announcement (see page 6, paragraph A, 3)
• (no Messages stored in non-volatile memory
batteries required)
• Recording volume LED indicator for
consistently high-quality recordings
• Recognizes handshake signals from
virtually any PABX, Centrex or C.O. line
• Programmable to repeat announcement
The DVA-500A is a professional and
cost-effective digital voice announcer
specifically designed for ACD/UCD, auto
attendant, intercept, night message,
information provider applications and
other PABX and Centrex announcement
functions.
Non-Volatile Digital Voice Announcer with
Remote Recording and Transfer Capabilities
VIKING©
Technical Practice
Telecommunication Peripheral Products DVA-500A
Digital Voice
Announcer
October 26, 2004
Features Applications
Sales...(715) 386 - 8861
Specifications
http://www.VikingElectronics.com
E-mail...Sales@VikingElectronics.com
Power: 120V AC/12V DC 500 mA, UL listed adapter provided
Dimensions: 127mm x 127mm x 38mm (5” x 5” x 1.5”)
Shipping Weight: 1.13 kg (2.5 lbs.)
Environmental: 0°C to 32°C (20°F to 90°F) with 5% to 95% non-
condensing humidity
Message Length: Up to 1 minute
Connections: (1) RJ11, (1) 4-wire E&M, (1) 1/8 audio jack, (1)
handset jack
Sampling Rate: 64 K (equivalent)
The DVA-500A is factory installed with 1 minute of non-volatile record time.
Recordings are retained for 25 years or more without power or batteries.
The DVA-500A will increase call handling capacity by answering on demand or during
the first ring and automatically adjusting the announce cycle to the message length.
The DVA-500A disconnects on CPC and provides instant “rewind” for the next caller.
Installation
Programming
Wire the DVA-500A with either or both the 4 wire E&M jack and/or the 2 wire ring trip jack as shown above. When
using the 4 wire E&M, the ring trip interface may be used for remote programming. The E&M functions will resume
when programming is nished.
Six wire modular
cable
Ring Trip - Standard C.O. line
or analog PABX/KSU station
120V AC
Rear View of the DVA-500A
3
2
4
5
34
6
3 & 4
5
2
6
600 Ohm audio
M lead (start)
E lead (busy)
Earth Ground
Four Wire E&M
A. Continuous Play
Set dip switches to protocol A. Connect pin 5 (start) to pin 2 (busy). The announcement will be repeated
continuously on pins 3 and 4 (600 ohm output).
600 OHM
E & M
USE ONLY LISTED
CLASS 2 POWER
SOURCE
12V --------
0.5 A MAX
CO/PABX
LINE
E & M
PROTOCOLS
Viking Electronics, Inc., Hudson, WI 54016
Four Wire E & M
Note: The DVA-500A requires a 24 hour unswitched 115V AC outlet. To protect the internal electronics, the
installation of a surge protector is recommended.
3.5mm (1/8”) audio jack permits down-
loading the message from a tape player.
Start Button
Record/Play Selector
Playback Volume Adjustment
“In Use” and “Record Level” Indicator
VIKING©
Digital Announcer
Model DVA-500A
REC/MON
VOL
Viking Electronics, Inc. Hudson WI 54016
PLAY REC START
TAPE
LED
Standard carbon handset to record and monitor
Note: Electret or Dynamic handsets will not work.
1 2 3 4
A. Installing the DVA-500A
2
B. E & M Protocol Settings and Timing Specications
1 2 3 4
Three different protocol settings are switch selectable for changing E&M timing plus the ability to invert the start
and/or busy signals. Place the DIP switches in the desired settings, then momentary power down the .DVA-500A
600 OHM
E & M
USE ONLY LISTED
CLASS 2 POWER
SOURCE
12V --------
0.5 A MAX
CO/PABX
LINE
1 2 3 4
E & M
PROTOCOLS
Viking Electronics, Inc., Hudson, WI 54016
Protocol
A
B
C
Sw 1
OFF
OFF
ON
Sw 2
OFF
ON
OFF
ON
OFF
Switch
3
4
Position
ON
OFF
ON
OFF
Description
Inverted Start
Normal
Inverted Busy
Normal
1. “On Demand” A OFF . Set dip switches to protocol “ ” (Sw 1 and Sw 2 - ).
GND DVA-500A pin 6 on
Earth
GND
Contact from PABX
Pin 5
Start
250ms minimum
Idle/open
GND (+)
M Lead (Start)
Open
Busy output
from DVA-500A
Pin 2
Idle/closed
In Use
250ms maximum
GND (+)
E Lead (Busy)
Open
Announcement Duration
2. Type 5 E & M, wink start. B OFF ON Set dip switches to protocol “ ” (Sw 1 - , Sw 2 - ).
GND DVA-500A pin 6 on
Earth
GND
Contact from PABX
Pin 5
Start (M)
Idle/open
GND (+)
M Lead (Start)
Open
Busy output
from DVA-500A
Pin 2
Wink (E)
600ms (Programmable)
GND (+)
E Lead (Busy)
Open
Announcement
Idle/closed
B
O
M
*
E
O
M
*
B
O
M
*
GND DVA-500Apin 6 on
Earth
GND
Pin 5
Start GND (+)
M Lead (Start)
(Connected to
earth GND)
Busy output
from DVA-500A
600ms (Programmable)
GND (+)
E Lead (Busy)
Open
Announcement
B
O
M
*
B
O
M
*
3. Drum Recorder Replacement. A OFF). Set dip switches to protocol “ ” (Sw 1 and Sw 2 -
Announcement B
O
M
*
Pin 2
*NOTE: BOM = “Beginning Of Message” pulse. EOM = “End Of Message” pulse.
4. Single Play On Demand C ON OFF. Set dip switches to protocol “ ” (Sw1 - , Sw 2 - ).
GND DVA-500Apin 6 on
Earth
GND
Contact from PABX
Pin 5
Start
Idle/open
GND (+)
M Lead (Start)
Open
Busy output
from DVA-500A
Pin 2
Idle/closed
In Use
250ms maximum
GND (+)
E Lead (Busy)
Open
Announcement
250ms minimum
3

Product specificaties

Merk: Viking
Categorie: Niet gecategoriseerd
Model: DVA-500A

Heb je hulp nodig?

Als je hulp nodig hebt met Viking DVA-500A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Viking

Viking

Viking DVA-500A Handleiding

1 Juni 2023
Viking

Viking D22 Handleiding

26 Mei 2023
Viking

Viking VBO1830S Handleiding

10 Mei 2023
Viking

Viking PDDP242SS Handleiding

30 April 2023
Viking

Viking PDDP242 Handleiding

28 April 2023
Viking

Viking RD30BG6SS Handleiding

23 April 2023
Viking

Viking VSP30 Handleiding

17 April 2023
Viking

Viking DCCE1810SS Handleiding

17 April 2023
Viking

Viking VBO1811 Handleiding

16 April 2023
Viking

Viking VSBO2402SS Handleiding

24 Maart 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo VAVE-P17-TP-5YL1-P Handleiding

21 November 2024
Festo

Festo SD-SUB-D-BU9 Handleiding

21 November 2024
Festo

Festo SAMH-F12-MK Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024