Viking K-1200-IP Handleiding

Viking Toegangscontrolesysteem K-1200-IP

Lees hieronder de 📖 handleiding in het Nederlandse voor Viking K-1200-IP (25 pagina's) in de categorie Toegangscontrolesysteem. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/25

Features

Specifications

Information: 715-386-8861

www.VikingElectronics.com

• Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with

permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad

buttons and T-10 Security Torx drive mounting screws.

• Marine grade 316 stainless steel faceplate and screws. Weather Resistant Features:

Keypad internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate,

mic and speaker gaskets.

• Two sets of SPDT 2 Amp relay contacts for door/gate or camera control

• Optional for Secure Remote Relay Control, see RC-4A DOD 582

• Blue “Call /Status” LED indicator

• SIP compliant (see page 2 for compatible SIP servers and IP phone systems)

• Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging

• PoE powered (class 2, <6.5 Watts)

• Automatic Noise Canceling (ANC) feature for operation in noisy environments

• Viking’s proprietary VOX switching eliminates the need for “Push to Talk” mode

• Network downloadable firmware

• 26 bit Wiegand input for optional proximity card readers, see and DOD 221 228

• 26 Bit Wiegand output connect to card reader input of an Access Control System

• Programmable to speed dial up to 12 numbers

Power: PoE class 2 (<6.5 Watts)

Dimensions: Overall: 5” x 10” x 2.5” (127 mm x 254 mm x 63.5 mm)

Rough-in box: 4.5” x 9.12” x 2.5” (114 mm x 232 mm x 64 mm)

Shipping Weight: K-1200-IP: 4.2 lbs (1.9 kg), K-1200-IP-EWP: 4.4 lbs (2.0 kg)

Operating Temperature: -40°F to 140°F (-40°C to 60°C)

Humidity - Standard Products: 5% to 95% non-condensing

Humidity - EWP Products: Up to 100%

Audio Codecs: G711u, G711a, G722

Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over

Regulatory Compliance: CE, FCC Part 15 and Canada ICES-003 Class A

Connections: (1) RJ45 10/100 Base-T, (14) gel-filled butt connectors

Installation requires the assistance of a

Network Administrator / IT Technician.

The K-1200-IP is a durable and attractive handsfree phone for apartment and residential door entry

applications requiring a vandal resistant VoIP speaker phone. The phone is designed to provideK-1200-IP

quick and reliable handsfree communication for SIP VoIP phone systems or cloud based service providers.

The unit can be programmed from any PC on the same LAN or remotely using a Static IP Address. The

K-1200-IP entry phone can dial up to 12 programmable numbers and 12 rollover numbers. The brushed

stainless steel faceplate has a built-in 12 resident directory with a waterproof, scratch resistant lens and 12

buttons for single push auto-dialing of a tenant’s phone number or business extension.

When the phone is connected to an apartment or business tenant, a built-in contact closure mayK-1200-IP

be activated to control an electric gate or door strike. Up to 1,000 keyless entry codes may be programmed,

providing tenants with keyless entry. A 26 bit Wiegand input is provided for adding an optional proximity

card reader with capacity to program up to 1,000 card numbers. Keyless entry codes and card numbers

can be programmed to only allow access at specific times and/or day of the week. The includesK-1200-IP

a request for exit (REX) input and also offers event logging with time and date stamp.

The K-1200-IP-EWP K-1200-IP shares all of the features of the in addition to Enhanced Weather Protection

(EWP) for outdoor installations where the unit is exposed to precipitation or condensation. EWP products

are designed to meet IP66 standards and may feature foam rubber gaskets, sealed connections, gel-filled

butt connectors, as well as potted circuit boards. For more information on EWP, see . DOD 859

• Gate Entrance

• Courtesy Assistance Phone

• Customer Service Phone

• Automated Teller (ATM) Phone

K-1200-IP-EWP

(shown in optional VE-5x10

surface mount box sold separately)

• Cycles to rollover phone number on busy or no-answer

• Program up to 1,000 keyless entry codes and/or proximity card numbers

• Keyless entry codes and proximity card numbers can be programmed to only allow

access at specific times and days of week

• Event logging with time and date stamp

• Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66

Ingress Protection Rating, see DOD 859

• Hangs up on busy signal, time-out or touch tone command

• Remotely programmable

• Extended temperature range -40°F to 140°F

• Programmable volume adjustments for microphone and speaker

• Selectable auto-answer feature for monitoring

• Flush mount with included Zinc plated steel rough-in box,

• Surface mount using an optional surface mount box (not included, see VE-5x10 DOD 424)

• Optional Long Range RFID receiver, see LRR-4 DOD 226

• Optional kit to illuminate the front panel at night, see VE-LIGHT DOD 428

• Diagnostics for testing microphone, speaker and relays

• Door Entry Phone

• Apartment Entry Phone

• Kiosk Phone

Vandal Resistant VoIP Entry Phone System

with Built-In Directory and 12 Button Auto Dialer

K-1200-IP

“Brushed 316 Stainless Steel”

(similar to brushed nickel)

Applications

PRODUCT

MANUAL

Designed, Manufactured and Supported in the USA

K-1200-IP Series

VoIP Entry Phone System

with 12 Button Auto Dialer

September 28 , 2021

SECURITY & COMMUNICATION

VIKING

VoIP SIP System Compatibility

For compatibility and vendor specific detailed configuration instructions, see the Viking VoIP

SIP System Compatibility List, DOD 944. To open and download this PDF file:

1. Go to www.vikingelectronics.com

and enter in the search box 944

2. Click Application Note (DOD 944)

to open and download the PDF

Scan the QR code below to open

and download the Viking VoIP

SIP System Compatibility List - OR -

Important: Exclusion from this list means only that compatibility has not been verified, it does not mean

incompatibility. If you have questions, please call Viking Electronics at 715-386-8861.

Definitions

Client: A computer or device that makes use of a server. As an example, the client might request a particular file from the server.

DHCP: Dynamic Host Configuration Protocol. In this procedure the network server or router takes note of a client’s MAC address and

assigns an IP address to allow the client to communicate with other devices on the network.

DNS Server: A DNS (Domain Name System) server translates domain names (ie: www.vikingelectronics.com) into an IP address.

Ethernet: Ethernet is the most commonly used technology. An Ethernet Local Area Network typically uses twisted pair wires toLAN

achieve transmission speeds up to 1Gbps.

Host: A computer or device connected to a network.

Host Name: A host name is a label assigned to a device connected to a computer network that is used to identify the device in various

forms of network communication.

Hosts File: A file stored in a computer that lists host names and their corresponding IP addresses with the purpose of mapping addresses

to hosts or vice versa.

Internet: A worldwide system of computer networks running on protocol which can be accessed by individual computers or networks.IP

IP: Internet Protocol is the set of communications conventions that govern the way computers communicate on networks and on the

Internet.

IP Address: This is the address that uniquely identifies a host on a network.

LAN: Local Area Network. A LAN is a network connecting computers and other devices within an office or building.

Lease: The amount of time a DHCP server reserves an address it has assigned. If the address isn’t used by the host for a period of

time, the lease can expire and the address can be assigned to another host.

MAC Address: MAC stands for Media Access Control. A MAC address, also called a hardware address or physical address, is a unique

address assigned to a device at the factory. It resides in the device’s memory and is used by routers to send network traffic to the correct

IP address. You can find the MAC address of your K-1200-IP phone printed on a white label on the top surface of the PoE LAN port.

Router: A device that forwards data from one network to another. In order to send information to the right location, routers look at IP

Address, and Subnet Mask. MAC Address

RTP: Real-Time Transport Protocol is an Internet protocol standard that specifies a way for programs to manage the real-time transmission

of multimedia data over either unicast or multicast network services.

Server: A computer or device that fulfills requests from a client. This could involve the server sending a particular file requested by the

client.

Session Initiation Protocol (SIP): Is a signaling communications protocol, widely used for controlling multimedia communication sessions

such as voice and video calls over Internet Protocol ( ) networks. The protocol defines the messages that are sent between endpoints,IP

which govern establishment, termination and other essential elements of a call.

Static IP Address: A static IP Address has been assigned manually and is permanent until it is manually removed. It is not subject to the

Lease limitations of a Dynamic IP Address assigned by the DHCP Server. The default static IP Address is: 192.168.154.1

Subnet: A portion of a network that shares a common address component. On TCP/IP networks, subnets are defined as all devices

whose IP addresses have the same prefix. For example, all devices with IP addresses that start with 100.100.100. would be part of the

same subnet. Dividing a network into subnets is useful for both security and performance reasons. IP networks are divided using a subnet

mask.

TCP/IP: Transmission Control Protocol/Internet Protocol is the suite of communications protocols used to connect hosts on the Internet.

TCP/IP uses several protocols, the two main ones being TCP and IP. TCP/IP is built into the UNIX operating system and is used by the

Internet, making it the de facto standard for transmitting data over networks.

TISP: Telephone Internet Service Provider

WAN: Wide Area Network. A WAN is a network comprising a large geographical area like a state or country. The largest WAN is the

Internet.

Wireless Access Point (AP): A device that allows wireless devices to connect to a wired network using Wi-Fi, or related standards. The

AP usually connects to a router (via a wired network) as a standalone device, but it can also be an integral component of the router itself.

Wireless Repeater (Wireless Range Extender): takes an existing signal from a wireless router or access point and rebroadcasts it to

create a second network. When two or more hosts have to be connected with one another over the IEEE 802.11 protocol and the distance

is too long for a direct connection to be established, a wireless repeater is used to bridge the gap.

Product specificaties

Merk:	Viking
Categorie:	Toegangscontrolesysteem
Model:	K-1200-IP
Kleur van het product:	Roestvrijstaal
Ingebouwd display:	Nee
Gewicht:	1900 g
Breedte:	127 mm
Diepte:	63.5 mm
Hoogte:	254 mm
Materiaal behuizing:	Roestvrijstaal
LED-indicatoren:	Status
Aantal Ethernet LAN (RJ-45)-poorten:	1
Ingebouwde luidsprekers:	Ja
Certificering:	CE\nCanada ICES\nFCC Part 15\nSIP
Bekabelingstechnologie:	10/100
Camera voorzijde:	Nee
Power over Ethernet (PoE):	Ja
Keypad aantal toetsen:	12
Bedrijfstemperatuur (T-T):	-40 - 60 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Vermogen per poort Power over Ethernet (PoE):	6.5 W
Geïntegreerd Keypad:	Ja
Authenticatie type:	Access chip/card, Password
Toegangcode lezer:	Ja
Toegangchip/kaart lezer:	Nee