Ventus W927 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Ventus W927 (1 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
KSPO:
NIL BRAND DV101NL & TS331 MANUAL(ENG)
SIZE: W105 X H148(mm)
BY Lai H Z 13/03/15
(DV101NL)
USER MANUAL
Remote Thermometer
Main Unit
In/Outdoor Temperature
DAY/NIGHT
DAY/NIGHT
DAY/NIGHT
WEEK ALARM
SINGLE ALARM PRE-ALARM TIME & DATE.
Insert 2 pcs AAA batteries for remote sensor, and then insert 2 pcs AA batteries for the
-20 degree C to 60 degree C
AA batteries x 2 pcs.
AAA batteries x 2 pcs.
Key Features:
- Weather Status for today and tomorrow for 470 cities
- Rain/Snow/Hail Probability for today
- Wind Speed and Wind Direction for today
- 3 channel outdoor 433MHz wireless Thermometer
- Indoor Thermometer
- Maximum and minimum memories of temperature readings
- Temperature trends (UP/ FLAT/ DOWN), Temperature in degree C only.
- Regional Day-time temperature and Night-time Temperature information
- 7-languages abbreviation (English/ Espanol/ Francais/ Italiano/Dutch /Swedish/ Deutsch)
- Critical Weather Alert
- 5 Selected cities Information.
- Radio-controlled Clock and Calendar (24 hours format only)
- Time-zone setting
- Powered by 2 x AA batteries for main unit, and 2 x AAA batteries for the outdoor sensor
- Dual alarm (weekday alarm/single alarm, Alarm sound for 2 minutes)
- Pre- alarm (Programmable) for outdoor sensor – Channel 1 only.
- Battery Low Indicator for Main Unit and Wireless Sensor
There are total 7 buttons on the Main Unit, namely:
SET
- Selected Date &Time City Week Alarm time“OFF W-ALM” Single
alarm“OFF S-ALM” Pre-Alarm“OFF P-ALM”
- Press and HOLD [SET] for 3 seconds to select your <1> Country, <2> Time Zone, <3>
Language, <4>Exit to city display mode
DAY/NIGHT
- Critical Whether Information Time + Date Day/Night Weather Status Change
- Read the critical weather information one by one.
- increasing the value during setting
- Turn ON alarm
- Press and Hold for 3 seconds to force RC Clock receiving
- Shift Tomorrow Weather information on LCD and the “DAY”tcon fleshing.
- decreasing the value during setting
- Chose one of the pre-selected cities
- Turn OFF alarm
- Press and Hold for 3 seconds to force to search for outdoor sensor
MEM
- display the maximum and minimum measured Temperature in record
- Press and Hold for 3 seconds to clear all the Max. and Min. record
- Edit your home town
TEST
- Find the place for the device which has a good reception
- Add the city into the list of your desired cities
OR
Remove the city out of the list of desired Cities
- Edit your home town
CHANNEL
- Switch to read Outdoor Thermometer channel 1, 2, 3.
- Press and Hold key for 3 seconds to enter into“ ” display mode
MOTION SENSOR
- Move your hand before the sensor, to shift Tomorrow Weather information on LCD and the
“DAY” icon flashing.
with 3 channels
Alarm time
Scan A: that “A” means the reception quality should be 0=bad…..9=very good
SWITCH CITY ALARM TIME TIME & DATE
After inserting the batteries, the weather station searches for the Radio controlled Time signal
as well as the MeteoTime signal. After it has successfully received the MeteoTime signal, the
information windows the default city “ ”.
You are able to press [ ] to switch from the display of the City to week alarm, single SET
alarm or pre-alarm or date for Frankfurt am Main.
When you selected the other city, the weather information will be of this selected city.
City mode.
C (within +5ºC - +40ºC)
Maximum No. of Remote unit : 3
OUTDOOR TEMPEATURE READING
The wave display indicates the reception of the remote unit is in good order.
If no readings are received from the remote unit for more than two minutes, blanks will be
displayed until further readings are successfully searched. Checked the remote unit is sound and
secure. You can wait for a little while or Hold DOWN ( ) button for 2 seconds to enforce an
immediate search.
The kinetic wave display shows the signal receiving status of the main unit. There are three
possible forms:
TEMPERATURE TREND
The trend indicator shows the trend of temperatures collected at that particular remote sight.
Three trends: rising steady and falling will be shown.
VIEWING REMOTE (CHANNEL) TEMPERATURE
Static Display:
- Press [ ] button to select measurements from different remote sensors, each is CHANNEL
mode to a unique channel 1,2, or 3
Channel Auto-Scan Display:
- Press To enable an automatic scan of all channels, press and hold button, until the CHANNEL
icon is displayed. The measurements from each remote channel will be alternately
displayed with a 5 seconds viewing.
NOTE: are more than onethe channel auto-scan feature can be active only if there remote
sensors operating and are set to different channels.
MAXIMUM AND MINIMUM TEMPERATURES
- The maximum and minimum recorded indoor and outdoor temperatures will be automatically
stored in the memory of the main unit. To display them, press [ ] button and the MEM
respective indicators, [ ] or [ ] will be displayed.MAX MIN
- To clear the memory, hold [ ] button for 3 seconds. The maximum and minimum MEM
temperature records will be erased.
ALARM FEATURE
There are three time alarms available on the main unit:
* Weekday Alarm
The alarm sound will be activated and the icon will flash on weekdays (Mo-Fr) when it is
armed and the alarm time is reached.
* Single Alarm
The alarm sound will be activated and the icon will flash when it is armed and the alarm time
is reached. Once it finished, it will be disabled automatically
* Pre-Alarm
The pre-alarm will be activated and the icon will falsh if the temperature of channel 1 is falling
to +0 °C or below.
It is programmable 15,30,45,60 or 90 minutes earlier than the weekday alarm or single alarm
time.
HOW TO SET ALARM
- Press [ ] button to toggle between weekday, single alarm time or pre-alarm.SET
If the alarm is disarmed, the time will be displayed as “OFF W-ALM”
- Hold [ ] button for 3 seconds, the hour digits will blink.SET
- Enter the hour by using UP [ ] DOWN [ ] or button.
- Press [ ] button to confirm, the minute digits will blink.SET
- Enter the hour by using UP [ ] DOWN [ ] or button.
- Press [ ] button to exit and the respective alarm icons [ ] , [ ] and [ ]will be SET
activated.
SNOOZE FUNCTION
-When alarm is on, swing your hand on above the motion sensor, alarm will be stopped
temporarily and the alarm icon flashing. The alarm will sound again after 4 minutes.
HOW TO STOP ALARM
- When alarm is on, the respective alarm icons [ ] and [ ] will be flashing. Press UP [ ] or
DOWN [ ] button to stop the alarm immediately.
- To turn off the alarm, press UP [ ] DOWN [ ] or button to change the alarm time display as
“OFF W-ALM”
- If no button is pressed, the alarm will be sounded for 2 minutes and then deactivated
automatically.
Icon
Arrow indicator
Temperature Trend Rising Steady Falling
Status
Searching for the signals from the remote sensor
Corresponding remote sensor signal received successfully
No signals
SET THE TIME ZONE AND LANGUAGE
90
SIZE AA / UM3
SIZE AA / UM3
Today or Tomorrow (shift)
Information including Wind
Speed, Wind Direction, and the
probability of Rain/Snow/Hail,
Day & Night Temperature, Day
& Night Weather Status.
DAY/NIGHT
WEATHER
WEATHER
WEATHER
blinkt
Tomorrow
WIR ELE SS TH ER MO HYG RO
2
3 4
5 6
7 8
9 10
11 12
13 14
15 16
17 18
19 20
21 22
23 24
25 26
27 28
29 30
31 32
33 34
35 36
37


Product specificaties

Merk: Ventus
Categorie: Weerstation
Model: W927

Heb je hulp nodig?

Als je hulp nodig hebt met Ventus W927 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Weerstation Ventus

Handleiding Weerstation

Nieuwste handleidingen voor Weerstation