Ventus W193-R Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Ventus W193-R (38 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 92 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/38
VENTUS W193-R
ENGLISH ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦PAGE 02
GERMAN ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦PAGE 07
DANISH ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦PAGE 15
SWEDISH ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦PAGE 21
NORWEGIAN ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦PAGE 27
FINNISH ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦ā€¦PAGE 33
Ownerā€™s Manual
W193-R WIRELESS COLOR RAIN GAUGE
Thank you for purchasing the new generation of color weather station. Designed and engineered with
the state-of-art technology and components, this instrument will provide accurate and reliable
measurement of rainfall readings as well as indoor/outdoor temperature and alarm clock. Read this
manual carefully to fully explore the features and functions of the new product.
In this package you will find:
One main unit (Receiver)
One rain gauge (Transmitter)
One remote thermometer sensor (Transmitter)
Mounting hardware for rain gauge (2 sets of screws & plastic screw plugs)
One ownerā€™sā€™ manual
Additional tools needed for installation
- Small Phillips screwdriver
- Electric drill
- Pencil
- Level
Name and Functions of Buttons:
Press Functions Hold 3 seconds
LIGHT/CHANNEL Select indoor, Channel 1,2,3, Search for remote sensor
auto scroll
Extend backlight
MODE (RAIN) Read daily, weekly, monthly and total Clear memory of current rainfall
rainfall display reading
UNIT (RAIN) Select mm or inch unit
SEARCH (RAIN) Hold to search for remote rain
gauge
CLOCK Read time, calendar and day-of-week Set Clock, Calendar
ALARM Read alarm time; enable/disable alarm Alarm time setting
+ 1 step forward in setting Fast advance
C/F Toggle degree C & F unit
LIGHT ON/OFF Turn on/off continuous backlight when
adapter is connected
2
INSTALLATION
Setting up the main unit
Main Power Source: Plug in the 6.0V adapter into the adapter socket at the back for basic operation
and continuous backlight.
Backup Power: Open the battery door, install 3 pieces of AAA backup batteries according to the
polarity indicated, close the battery cover.
Setting up the wireless thermometer sensor
Loosen the screws on the battery door with a small screwdriver, insert 2 pieces of AAA batteries
according to the polarity indicated. Replace the cover and tighten the screws.
ļ¬ For the first installation, always turn on the home unit and then the remote sensor. Set Channel 1
for the first remote sensor. Set channel 2 and channel 3 for the 2nd and 3rd sensor.
ļ¬ Press and hold [LIGHT/CHANNEL] button on main unit until a beep is sound to search for remote
sensor. Outdoor temperature readings will flash indicating it is in the searching mode
ļ¬ Press the [Tx] button on the back of remote sensor to transmit RF signal.
ļ¬ When RF connection is established, the respective temperature of the selected channel will
appear on the main unit.
Note: Make sure the transmission is within range and path is clear of obstacles and RF interferences.
Shorten the distance between the main unit & remote sensor if RF connection cannot be established.
Then follow the above procedure to setup the sensor again.
Setting up the wireless rain gauge
To ensure successful installation and the best performance, we recommend you follow the installation
instructions in the order they appear in this manual.
1. Selecting a location for the rain gauge
Select a mounting location for the rain gauge that is:
- a flat, level surface
- within 30 meter open area from the main unit. Reduce distance if obstacles is between the rain
gauge & the main unit.
IMPORTANT: For best transmission distance, look for a location where the rain gauge can be
placed 1 meter or more above ground level.
- in an area not blocked on the top or sides, so rain can freely reach the rain gauge (for example,
not under an overhang or too close to a building or fence)
3


Product specificaties

Merk: Ventus
Categorie: Weerstation
Model: W193-R

Heb je hulp nodig?

Als je hulp nodig hebt met Ventus W193-R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Weerstation Ventus

Handleiding Weerstation

Nieuwste handleidingen voor Weerstation