Ventus W185 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Ventus W185 (4 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
W185. WIRELESS VFD WEATHER STATION Owners Manual
Name and Functions of Buttons:
Press Functions Hold 3 seconds
CHANNEL/SNOOZE Toggle Indoor & channel 1, 2, 3, auto-scroll Search for remote sensor
Trigger snooze alarm & extend backlight
CLOCK Read time, calendar and day-of-the-week Set Clock & Calendar
ALARM Read alarm time; enable/disable alarm Alarm time setting
UP 1 step forward in setting Fast advance
Down 1 step backward in setting Fast backward
MEM Read max/min readings Clear memory record
HEAT INDEX/ Read heat index & dew point
DEW POINT
C/F Toggle degree C & F unit
Slide Switch
BACKLIGHT (AUTO/ HIGH / LOW / OFF) Display brightness setting
(*** AUTO mode is recommended to adjust the brightness automatically)
BATTERY & ADAPTER INSTALLATION
Home Receiver Unit:
Main Power Source: Plug in the 7.5V adapter into the adapter socket at the back for basic operation
Backup Power: 2 pieces of LR44 lithium batteries are included in the unit to backup the time & calendar
setting. Pull out the plastic insulation sheet from the back casing to operate.
To replace the batteries, loosen the screw on the battery cover, replace 2 pieces of LR44
lithium batteries according to the polarity indicated, close the battery cover.
Remote Sensor: Loosen the screws on the battery door with a small screwdriver, insert 2 pieces of AAA
batteries according to the polarity indicated. Replace the cover and tighten the screws.
SETTING UP THE WIRELESS THERMO-HYGROMETER:
Place the main unit away from metal & source of interference such as mobile phones, appliances, TV etc.
For the first installation, always turn on the home unit and then the remote sensor. Set Channel 1 for the
first remote sensor. Set channel 2 and channel 3 for the 2
nd
and 3
rd
sensor.
Press and hold [CHANNEL/SNOOZE] button on main unit until a beep is sound to search for remote
sensor.
Press the [TX] button on the back of remote sensor to transmit RF signal.
When RF connection is established, the respective temperature & humidity of the selected channel will
appear on the main unit.
NOTE: If low battery indicator ” appears on the remote sensor’s display, the RF transmission range will
drop and it may fail to connect with the main unit. Replace the batteries if necessary to ensure successful RF
connection.
WEATHER FORECAST & BAROMETRIC PRESSURE BAR CHART
The unit predicts weather condition of the next 12 – 24 hours based on the change of atmospheric pressure.
The coverage area is around 30 – 50 km. The weather forecast is based on atmospheric pressure change and
is about 70-75% correct. As weather conditions cannot be 100% correctly forecasted, we cannot be
responsible for any loss caused by an incorrect forecast.
SUNNY PARTLY CLOUDY CLOUDY RAINY STORMY
IN/OUT TEMPERATURE & HUMIDITY
Press [CHANNEL/SNOOZE] button to select indoor, Ch1, Ch2, Ch3 and auto-channel scrolling display
modes.
Press [C/F] button to select temperature unit C/ F.
To search for remote sensor, hold [CHANNEL/SNOOZE] on the main unit until a beep is sound. Then press [TX]
on the remote sensor to transmit RF signal to the receiver. When RF connection is established, the respective
temperature & humidity of the selected channel will appear on the main unit
IN/OUT HEAT INDEX
Heat Index combines the effects of heat and humidity. It is the apparent temperature of how hot the
heat-humidity combination makes it feels.
Press [Heat Index/Dew Point] button once to show the respective indoor or outdoor heat index. “HEAT INDEX
icon will appear.
IN/OUT DEW POINT
Dew point is the saturation point of the air, or the temperature to which the air has to be cooled in order to get
condensation.
In normal mode, press [HEAT INDEX / DEW POINT] button twice to show the respective indoor or outdoor dew
point reading. “DEW POINT” icon will appear.
COLOR BAR GRAPHS
The color graphs are designed as an intuitive way to gauge the weather at a glance.
The red color bar graph represents the respective In/Out temperature, heat index or dew point of the current
display mode. The blue graph represents the respective In/Out humidity. As the measurements change, the
number of illuminated bars changes automatically.
MAXIMUM / MINIMUM MEMORY
Press [MEM] button repeatedly to view the maximum & minimum values of temperature, humidity, heat index or
dew point readings. To clear the memory record, hold [MEM] button while the respective values are displaying
on screen.
CLOCK & CALENDAR
Press [CLOCK] to toggle display between time, calendar and day of the week.
Hold [CLOCK] button to enter clock setting mode. Using [ ]or [ ] to adjust and [CLOCK] to confirm, the ▲ ▼
following values can be set in sequence:
12/24hr format > Hr > Min > Year > D/M or M/D format > Month > Date > EXIT
MOON PHASE
Moon phase is displayed according to the current calendar.
ALARM SETTING
Press [ALARM] to show alarm time and “AL.” icon will appear. Press repeatedly to enable or disable the alarm.
Bell icon “ ” appears when alarm is enabled.
Hold [ALARM] to enter alarm time setting mode. Press [ ] or [ ] to enter the desired Hr/ Min values and press ▲ ▼
[ALARM] to confirm setting.
SNOOZE
When alarm is going off, press [CHANNEL/SNOOZE] to trigger snooze alarm and “ ” icon will flash. To stop
alarm for one day, press [ALARM] key.


Product specificaties

Merk: Ventus
Categorie: Weerstation
Model: W185

Heb je hulp nodig?

Als je hulp nodig hebt met Ventus W185 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Weerstation Ventus

Handleiding Weerstation

Nieuwste handleidingen voor Weerstation