Velleman K7302 Handleiding

Velleman Batterij-oplader K7302

Lees hieronder de 📖 handleiding in het Nederlandse voor Velleman K7302 (12 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

UNIVERSAL BATTERY CHARGER

K7302

ILLUSTRATED ASSEMBLY MANUAL H7302IP-1

Total solder points: 20

Diﬃculty level: beginner 1 2 3 4    5 advanced

Low cost soluton for charging of

both NiCd and NiMh batteries.

Specifications:

 Charges Ni Cd or Ni MH batteries.

 Ideal for in car use.

 Transforms a mains adapter into a charger (adapter socket included).

 Charge cellular phone, toys, portables, video batteries …

 Selectable charge current.

 LED charge indication.

Features:

 Charge current (±20%): 50mA, 100mA, 200mA, 300mA, 400mA. (selectable)

 Supply voltage: from 6.5VDC to 21VDC (depending on used battery)

 Supply current: same as charge current.

 Power supply polarity protected.

 LED function indication.

 Dimensions: 40 x 60 mm

 Fits in G403 type housing

Features & Specifications

Assembly hints

1. Assembly (Skipping this can lead to troubles ! )

Ok, so we have your attention. These hints will help you to make this project successful. Read them carefully.

1.1 Make sure you have the right tools:

• A good quality soldering iron (25-40W) with a small tip.

• Wipe it often on a wet sponge or cloth, to keep it clean; then apply solder to the tip, to give it a wet look. This is called ‘thinning’ and will

protect the tip, and enables you to make good connections. When solder rolls off the tip, it needs cleaning.

• Thin raisin-core solder. Do not use any flux or grease.

• A diagonal cutter to trim excess wires. To avoid injury when cutting excess leads, hold the lead so they

cannot fly towards the eyes.

• Needle nose pliers, for bending leads, or to hold components in place.

• Small blade and Phillips screwdrivers. A basic range is fine.

For some projects, a basic multi-meter is required, or might be handy

1.2 Assembly Hints :

⇒ Make sure the skill level matches your experience, to avoid disappointments.

⇒ Follow the instructions carefully. Read and understand the entire step before you perform each operation.

⇒ Perform the assembly in the correct order as stated in this manual

⇒ Position all parts on the PCB (Printed Circuit Board) as shown on the drawings.

⇒ Values on the circuit diagram are subject to changes.

⇒ Values in this assembly guide are correct*

⇒ Use the check-boxes to mark your progress.

⇒ Please read the included information on safety and customer service

* Typographical inaccuracies excluded. Always look for possible last minute manual updates, indicated as ‘NOTE’ on a separate leaflet.

0.0 0

Product specificaties

Merk:	Velleman
Categorie:	Batterij-oplader
Model:	K7302
Kleur van het product:	Groen
Breedte:	40 mm
Diepte:	60 mm
Capaciteit van de accu/batterij:	400 mAh
Spanning:	21 V