Valcom PagePro SIP VIP-204 Handleiding

Valcom Server PagePro SIP VIP-204

Lees hieronder de 📖 handleiding in het Nederlandse voor Valcom PagePro SIP VIP-204 (4 pagina's) in de categorie Server. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

1 947694

ISSUE 6

PagePro VIP-204

SIP Paging Gateway

INTRODUCTION

The VIP-204 SIP Paging Gateway is designed for

use with virtually all IP based telephone systems.

The unit provides SIP addressable groups and 4

analog outputs that may be included as part of

the SIP addressable groups. The VIP-204 can

control thousands of IP speakers and/or analog

speakers or provide an interface to legacy paging

systems.

Connection to a SIP server can be as individual

SIP Stations (extensions) or as a SIP trunk.

Station mode provides up to 8 SIP-adressable

groups. Trunk mode accepts up to 100 SIP

phone numbers for flexible grouping.

SPECIFICATIONS

Access Methods

 SIP

 Valcom Multicast Page Group

Features

 SIP – Addressable Groups (phone numbers)

 4 Analog Audio Outputs (for inclusion in

groups only)

 4 Programmable Form A Relay Closures

 RJ-45 for Network Connection

 Provides Audio for Valcom Analog One-Way

Self Amplified Speaker Assemblies or 25/70

Volt central amplifiers

 AUX Audio Input via RCA Jack

 Background Music Input, Music Mutes During

a Page

 Output Control Relay Closure Provided

During Paging Output

 2.5mm Jack for optional DC Power (non-

PoE)

 LED Status Indicator

 Network Activity LEDs

 Programmable Feedback Elimination/Page

Repeat

 Programmable Night Ring

Power Options

 Power over Ethernet (PoE) 802.3af, Class 3

Compatible

 Optional External Power Supply (VIP-324D)

Dimensions/Weight

1 Standard 19” Rack Unit:

 1.75” H x 16.6" W x 9.5" D

(4.57 cm x 42.16 cm x 24.13 cm)

 Weight: 7.25 lbs. (3.28 kg)

Nominal Specifications

AUX Input Impedance: 8 to 600 Ohms

AUX Input Level: -10dBm nominal

Output Impedance: 50 Ohms

Output Level: - 10dBm nominal

Relay Current Rating: 1 Amp @ 24VDC

Nominal Power Requirements

Via rear panel barrel connector:

Voltage: 24VDC

Current: 325mA

Via 802.3af PoE Ethernet Switch: Class 3

Environment

Temperature: 0 to +40° C

Humidity: 0 to 85% Non-Precipitating

Packing List

Qty Item

1 VIP-204

4 RJ-45 Patch Cables

4 VM-186 RJ-45 Connectors

4 Rubber Pads

2 Mounting Brackets W/ Hardware

1 VSP Document

CAUTION: To reduce the risk of electric shock,

Do not remove cover.

No user serviceable parts inside.

Refer servicing to qualified service pe rsonnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This sym bol indicates that dangerous

voltage constituting a risk of electric

shock is present with in this unit.

This symbol indicates that there are

important operating and maintenance

instructions in the literature accompanying

this unit.

INSTALLATION

FCC Information

This equipment has been tested and found to

comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated

in a commercial environment. This

equipment generates, uses and can radiate

radio frequency energy and if not installed

and used in accordance with the instruction

manual, may cause harmful interference to

radio communications. Operation of this

equipment in a residential area may cause

harmful interference in which case the user

will be required to correct the interference at

their own expense.

Precautionary Designations

Mounting

The VIP-204 SIP Paging Gateway is designed for

rack, shelf, or wall mounting.

Rack: Attach the brackets to the four holes

closest to the front on each side, and then mount

the unit to a 19” rack.

Shelf: Provided with the VIP-204 SIP Paging

Gateway are four rubber stick-on pads. Peel the

pads from their carrier backing and place at the

four corners of the bottom of the unit.

Wall: Using the brackets and wood screws

provided, secure the VIP-204 SIP Paging

Gateway to the wall.

Power Connections

The preferred method of powering a VIP-204 is

via a Power over Ethernet switch meeting the

802.3af specification.

If the rear panel barrel connector is used for

power, the preferred power supply is a Valcom

VIP-324D.

Make all required signal connections before

applying power to the unit.

Network Connection

The VIP-204 has one RJ-45 network connector

on the front panel.

Use a standard Ethernet patch cables to connect

the VIP-204 to an Ethernet switch. If the Ethernet

switch is 802.3af compliant, it will power the VIP-

204.

Signal Connections

The VIP-204 has 5 signal connectors on the rear

panel:

• 1 RCA jack for AUX audio input

• 4 RJ-45 connectors for audio and relay

connections for each networked channel.

AUX Input: Local audio may be input via the

rear panel RCA jack. Nominal input impedance

is 600 Ohms. Connect any compatible audio

source using an RCA patch cable. Audio

supplied through the rear panel RCA jack

broadcasts to all Audio Outs whenever they are

idle. This is typically used for background music.

Input / Output Connections: Access to the

audio output and relay output for each of the four

channels is provided through the four RJ-45 jacks

on the rear panel of the VIP-204. Four patch

cables and four VM-186 terminal block

connectors are included for ease of installation.

The following chart shows the pin assignments

for the four input/output connections.

N.O. Relay Closure Output: The Normally

Open Relay Closure Output connection can be

programmed on the VIP-204 to close the contacts

in response to paging events. The relay will

return to the open state when the event ends.

Audio Output: Typically connects to Self

Amplified Speakers or into an amplifier. Audio

feeds connected to the AUX Input mute on any

active Audio Output.

VM-186 Connector

Wire Color Signal

Blue & Blue/White N.O. Relay Closure

Output

Brown & Brown/White Audio Output

AUX

+24VDC

PORT4PORT 3PORT 2PORT 1

RJ-45 PATCH CABLE

VIP-204 (REAR VIEW)

VM-186

RJ45

BLUE

ORANGE

GREEN

BROWN

BLUE

N/O RELAY OUTPUT

AUDIO OUTPUT (TO SPEAKERS)

WHITE/BLUE

BLUE

WHITE/ORANGE

ORANGE

WHITE/GREEN

GREEN

WHITE/BROWN

BROWN

VIP-204 Audio/Relay Connections (one per channel)

Status Indicator Lights

The VIP-204 Network Interface has 3 status

indication lights:

STATUS: Flashes during normal operation and

solid during system startup.

LINK: Indicates a 100 Mbit Ethernet connection

when illuminated. A non-illuminated LINK LED

indicates a 10 Mbit connection or no network

connection.

ACT: Indicator flashes to indicate network activity

Operation

Provides paging from SIP connection or from

another Valcom VIP unit. Interface to customer

telephone system can be via SIP registration,

FXO port (with VIP-811), or FXS port (with

VIP-821). Unit can also be accessed from a

VIP-801 connected to a page port or a Valcom

page control.

Setup

Information specific to your application will need

to be programmed into the VIP-204. The PC

used for programming should be connected to

the same subnet as the VIP-204.

Setup will be done using the IP Solutions Setup

Tool. Download the latest version of the free IP

Solutions Setup Tool from the web site at

www.valcom.com/vipsetuptool.

TECHNICAL ASSISTANCE

Assistance in troubleshooting is available from

the factory. Call (540) 563-2000 and press 1 for

Technical Support or via email at

support@valcom.com.

Valcom equipment is not field repairable.

Valcom, Inc. maintains service facilities in

Roanoke, VA. Should repairs be necessary,

attach a tag to the unit clearly stating your

company name, address, phone number, contact

person and the nature of the problem. Send the

unit to:

Valcom, Inc.

Repair & Return Dept.

5614 Hollins Road

Roanoke, Va. 24019-5056

Product specificaties

Merk:	Valcom
Categorie:	Server
Model:	PagePro SIP VIP-204
Kleur van het product:	Zilver
Aantal Ethernet LAN (RJ-45)-poorten:	1
Spanning:	24 V
Ondersteunde protocollen:	IETF SIP (RFC3261), IETF IGMP 3 (RFC3376), IETF RTP (RFC1889), IETF RFC2833\nDHCP, NTP
Afmetingen (B x D x H):	421.6 x 241 x 45.7 mm
Relatieve vochtigheid in bedrijf (V-V):	0 - 85 procent