Valcom Audio Port VIP-804 Handleiding

Valcom Niet gecategoriseerd Audio Port VIP-804

Lees hieronder de 📖 handleiding in het Nederlandse voor Valcom Audio Port VIP-804 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

1 947988

ISSUE 6

VIP-804

QUAD ENHANCED NETWORK AUDIO PORT

INTRODUCTION

The VIP-804 Quad Enhanced Network Audio Port

enables voice access to four zones of one-way

paging over an IP network, allowing page zones

to be extended anywhere network connectivity is

available. The VIP-804 can be programmed as a

SIP (Session Initiation Protocol) device with four

identities (one per audio channel) for connectivity

to virtually any Voice over IP (VoIP) telephone

system.

SPECIFICATIONS

Features

 4 Audio Outputs or Inputs

 4 Form A relay contacts

 4 Contact Closure Inputs

 4 SIP identities for registering to a VoIP

telephone system

 RJ-45 jack for network connection

 Front panel activity LED

 Provides audio for up to 40 Valcom one-way

amplified speaker assemblies per zone

 Output control contact closure provided

during paging output

 Contact closure or VOX operation of audio

inputs

 VM-186 RJ-45 Connector provided for

audio and relay interface

 Page with music output, music mutes during

page

 AUX audio input via RCA jack

 Compatible with 25 or 70 Volt amplifiers

 2.5mm jack for optional DC power

 Power over Ethernet (PoE) 802.3af compatible

Dimensions/Weight

 1.75” H x 6.75" W x 9.5" D

(4.45cm H x 17.15cm W x 24.13cm D)

 Weight: 1.75 lbs. (0.80 kg)

Nominal Specifications

Input Impedance: 600 Ohms

Input Level: -10dBm nominal

Voice Switch Sensitivity: -21dBm

AUX Input Impedance: 8 to 600 Ohms

AUX Input Level: -10dBm nominal

Output Impedance: 50 Ohms

Output Level: - 10dBm nominal

Relay Current: 1 AMP @ 24VDC

Nominal Power Requirements

Via back panel barrel connector:

Voltage: 24VDC

Current: 325mA

Via 802.3af PoE Ethernet Switch:

802.3af: Class 3

Environment

Temperature: 0 to +40° C

Humidity: 0 to 85% non-precipitating

Packing List

Qty Item

1 VIP-804

1 VSP Document

2 Mounting Brackets W/ Hardware

4 Rubber Pads

4 RJ-45 Patch Cables

4 VM-186 RJ-45 Connectors

2 947988

CAUTION: To reduce the risk of electric shock,

Do not remove cover.

No user serviceable parts inside.

Refer servicing to qualified service personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that dangerous

voltage constituting a risk of electric

shock is present within this unit.

This symbol indicates that there are

important operating and maintenance

instructions in the literature accompanying

this unit.

INSTALLATION

Precautionary Designations

FCC Information

This equipment has been tested and found to

comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated in

a commercial environment. This equipment

generates, uses and can radiate radio

frequency energy and if not installed and used

in accordance with the instruction manual, may

cause harmful interference to radio

communications. Operation of this equipment

in a residential area may cause harmful

interference in which case the user will be

required to correct the interference at his own

expense.

Mounting

The VIP-804 is designed for wall, table or rack

mounting.

Table: Provided with the VIP-804 are four rubber

pads. Peel the pads from their carrier backing

and place at the four corners of the bottom of the

unit.

Wall: Using the template on last page of this

document, mark the location of the bracket screw

holes on the wall. Drill 5/64" pilot holes, 3/4" deep,

at each screw location and use the wood screws

provided to attach the brackets to the wall. For

surfaces other than wood, use hardware

appropriate for the surface (not included). With the

brackets securely attached to the wall, attach the

VIP-804 to the brackets using the included

hardware. Figure 2 illustrates the bracket

assembly.

Rack: Following the assembly drawing, attach the

two mounting brackets to the VIP-804 unit. Using

rack screws, mount the VIP-804 in an available 1U

rack slot. See Figure 1.

Figure 1. Rack Mount

Figure 2. Wall Mount

Power Connections

The preferred method of powering a VIP-804 is via

a Power over Ethernet (PoE) switch meeting the

802.3af specification.

If the rear panel barrel connector is used for power,

the preferred power supply is a Valcom VIP-324D.

Make all required signal connections before

applying power to the unit. If powering via PoE,

make sure all signal connections via the back

panel are made then connect the VIP-804 to the

Ethernet switch.

If power is supplied via the barrel connector, make

sure all signal connections are secure. Attach the

unit to the network via the front panel RJ-45

Ethernet connector. Apply power by plugging the

power supply into the VIP-804 via the barrel

connector on the rear of the VIP-804.

3 947988

VM-186

RJ45

BLUE

ORANGE

GREEN

BROWN

BLUE

N/O RELAY OUTPUT

AUDIO INPUT

CONTACT CLOSURE INPUT

AUDIO OUTPUT

WHITE/BLUE

BLUE

WHITE/ORANGE

ORANGE

WHITE/GREEN

GREEN

WHITE/BROWN

BROWN

Network Connection

The VIP-804 has one RJ-45 Ethernet network

connector on the front panel.

Use a standard Ethernet patch cable to connect

the VIP-804 to an Ethernet switch.

Front View

Status Indicator Lights

The VIP-804 has 3 status indication lights on the

front panel:

STATUS: Flashes during normal operation and

solid during system startup.

LINK: Indicates 100 Mbit Ethernet connection

when illuminated. No activity indicates 10 Mbit

connection.

ACT: Indicator flashes to indicate network activity.

Signal Connections

The VIP-804 has five signal connectors on the

rear panel:

 1 RCA jack for AUX audio input

 4 RJ-45 connectors for audio and relay

connections for each networked channel

AUX Input: Local audio may be input via the

rear panel RCA jack. Nominal input impedance

is 600 Ohms. Connect any compatible audio

source using an RCA patch cable. Audio

supplied through the rear panel RCA jack is

transformer coupled to both Audio Out channels

when Audio Out is idle. This is typically

used for background music.

Rear View

Networked Channels: Access to the networked

audio output, audio input, contact closure input

and relay closure output is provided via four rear

panel RJ-45 connectors. Provided with the

VIP-804 are four RJ-45 patch cables and four

VM-186 RJ-45 Connectors.

Signal connections are made by connecting one

end of a patch cable to the VIP-804, Port 1, 2, 3, 4,

and the other end of the patch cable to the VM-186

connector. Access to the signals is via screw

connections or 110-style punch down block on the

VM-186 (see Figure 3). Signals are present on

pairs of pins, as shown in the following chart:

Figure 3. VM-186 RJ-45 Connector

Setup

Information specific to your application will need

to be programmed into the VIP-804 using a

computer. The PC used for programming should

be connected to the same subnet as the VIP-804.

Setup will be done using the IP Solutions Setup

Tool. Download the latest version of the free IP

Solutions Setup Tool from the Valcom web site at

www.valcom.com/vipsetuptool.

TECHNICAL ASSISTANCE

When trouble is reported, verify power is being

supplied to the unit and there are no broken

connections. If a spare unit is available, substitute

a spare unit for the suspected defective unit.

Assistance in troubleshooting is available from the

factory. Call (540) 563-2000 and press 1 for

Technical Support or via email at

support@valcom.com.

When requesting assistance, you should include

all available information. General information and

troubleshooting procedures are available on the

Valcom website at www.valcom.com.

Valcom equipment is not field repairable. Valcom,

Inc. maintains service facilities in Roanoke, VA.

Should repairs be necessary, attach a tag to the

unit clearly stating your company name, address,

phone number, contact person and the nature of

the problem. Send the unit to:

Valcom, Inc.

Repair & Return Dept.

5614 Hollins Road

Roanoke, Va. 24019-5056

Product specificaties

Merk:	Valcom
Categorie:	Niet gecategoriseerd
Model:	Audio Port VIP-804
Gewicht:	790 g
Breedte:	171.5 mm
Diepte:	241 mm
Hoogte:	44.5 mm
Vormfactor:	Doos
Voldoet aan industriestandaarden:	802.3af
Ondersteunde netwerkprotocollen:	DHCP, IGMP v3, UDP, TCP, HTTP, Telnet, FTP
Rack-montage:	Nee
Quality of Service (QoS):	Nee
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 85 procent
Aansluiting type:	RJ-45
Aantal stemkanalen ondersteund (max):	4