Vaddio Device Controller Handleiding

Vaddio Niet gecategoriseerd Device Controller

Lees hieronder de 📖 handleiding in het Nederlandse voor Vaddio Device Controller (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 229 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Document 411-0046-30 Rev B

April 2020

Installation and User Guide

Vaddio Device Controller

Color Touch-Panel

999-42300-000 (Worldwide)

The Vaddio Device Controller is designed to easily access and control Vaddio devices through their web-

based user interfaces. It is compatible with any Vaddio device that has a modern web interface.

Unpacking

Be sure you receive the following items:

nVaddio Device Controller

nTabletop mount with feet and mounting hardware

Installation

In this connection diagram, the Vaddio Device Controller touch-panel is connected to the same PoE+

switch that powers an EasyIP Decoder and EasyIP 10 camera. The touch-panel will locate the camera and

decoder when it scans the subnet.

1. Connect the Cat-5e cable to the touch-panel's network/PoE port.

2. Secure the mount to the touch-panel using the four screws.

3. Optional: Place the self-adhesive feet on the mount.

4. Connect the cable to a data and power source, such as the PoE+ switch that powers the devices to be

controlled.

Setting Up the Touch-Panel

You will need to set up the touch-panel. Select Configuration, then enter and save a PIN for the tablet. You

will need to enter the PIN whenever you return to the Configuration page.

Vaddio Device Controller Tablet Installation and User Guide

Locating a Device to Control

If you don't know the IP address of the device you need to control, select Scan. The touch-panel

searches the subnet where it's connected, and displays the Vaddio devices it finds.

If you know the IP address of the device you need to control, enter it in the Vaddio Device IP box and

select Save.

Opening the Selected Device's Web Interface

When you have selected the device to control, select Exit (upper right corner of the screen) to go to the

selected device's web interface. You will need to log in to the device if guest access is not enabled.

The first time you access a device at a specific IP address, the screen may remain blank for 20 seconds or

more.

Vaddio Device Controller Tablet Installation and User Guide

Product specificaties

Merk:	Vaddio
Categorie:	Niet gecategoriseerd
Model:	Device Controller
Kleur van het product:	Zwart
Breedte:	260.4 mm
Diepte:	177.8 mm
Hoogte:	28.6 mm
Beeldschermdiagonaal:	10 "
Resolutie:	1280 x 800 Pixels
Touchscreen:	Ja
Ondersteuning voor plaatsing:	Bureau
Ethernet LAN:	Ja
Type stroombron:	Power over Ethernet (PoE)
Certificering:	CE, TAA
Merkcompatibiliteit:	Vaddio
Aantal:	1
Compatibele producten:	EasyIP Ecosystem
Type product:	Vergaderzaalconsole