V7 Videoseven CS1330 Handleiding

V7 Videoseven CS1330

Lees hieronder de 📖 handleiding in het Nederlandse voor V7 Videoseven CS1330 (16 pagina's) in de categorie . Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

English User’s Manual . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 1

Español Guía del Usuario . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 3

Français Manuel de l'utilisateur. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 5

Deutsch Bedienungsanleitung . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 7

Italiano Manuale per l'utente . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 9

Nederlands Gebruikershandleiding . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 11

Português Manual do usuário . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 13

Webcam

CS1330

www.V7-world.com

User’s Manual

Guía del Usuario • Guide de l’utilisateur • Bedienungsanleitung •

Manuale per l’utente • Gebruikershandleiding • Manual do usuário

CS1330

User’s Manual

English

Installing the software

Note: Additional features will be available once you install the

software.

1. Connect the webcam to an available USB port.

2. After the hardware is found, insert the disc into your CD/DVD

drive.

3. Follow the on-screen instructions to install the software.

4. Double-click the amcap icon on your desktop and then select

Devices. Make sure that Vimicro USB 2.0 UVC PC Camera is

selected.

Note: The webcam software can also be found online at

www.V7-world.com under the Products and/or Support tabs.

Using the webcam

Important: If you have more than one webcam, set the CS1330

as the default. Double-click the amcap icon on your desktop

and then select Devices. Select Vimicro USB 2.0 UVC PC

Camera.

Finding the proper location for your webcam

• For best eye contact, put your webcam in the middle of your

monitor.

• Make sure the microphone on the webcam is no more than 3

feet (1 m) away from you and is pointing towards you.

• If you use computer speakers, put them at least 12 inches (30

cm) away from your microphone to reduce feedback and then

angle the speakers away from the microphone.

Focusing the webcam

Rotate the silver dial on the top of the camera to the right and left

until the webcam is in focus.

Recording video

1. Double-click the amcap icon on your desktop and then click

Capture.

2. In the drop-down menu select Start Capture. A menu opens.

3. Select OK to start capturing video or Cancel to exit.

4. To stop capturing video select Capture again and then Stop

Capture. The video is automatically saved to My Videos or to

the location you specified.

Recording video with audio

1. Double-click the amcap icon on your desktop and then click

Capture.

2. In the drop-down menu select Capture Audio. A checkmark will

appear.

3. Click Capture and select Start Capture.

4. To stop capturing video select Capture again and then Stop

Capture. The video is automatically saved to My Videos or to

the location you specified.

Taking a picture

1. Double-click the amcap icon on your desktop. The live image

from your webcam is shown.

2. Right-click the camera icon near your clock and click Still

Image.

3. Center your image in the viewfinder.

4. Select your desired resolution. The snapshot is taken and a

pop-up window appears.

5. Click File, then Save.

6. Select where you would like your picture to be saved.

Close the window to discard the photo.

Changing webcam settings

Saving videos

Videos are automatically saved to My Videos. To change the

location:

1. Double-click the amcap icon on your desktop and then select

Devices. Make sure that Vimicro USB 2.0 UVC PC Camera is

selected.

2. Click File, then select Save Captured Video As…

3. In the window that opens, select where you would like your

videos to be saved.

4. Click Open.

Plug and play

Connect the webcam to an available USB

port. The computer recognizes the webcam

and you are ready to start using the webcam.

1 Microphone

2 Activity light

3 Focus adjustment dial

4 Camera lens

Webcam Features

English: FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) This device must accept any interference received, including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna;

• Increase the separation between the equipment and receiver;

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not authorized by the party responsible for compliance could void the user’s authority to operate

this product.

Product Safety Instructions:

Read this guide for important safety and health information and for regulatory information.

Warning: Failure to properly set up, use, and care for this product can increase the risk of serious injury or death, or

damage to the device or devices. Read this instruction and keep all printed manuals, instruction for future references. This

Product Safety Instructions includes important information about many V7 products. Refer to sections that apply to the

feature of your device.

USB Powered Devices: Do not connect the USB power cable until all other cable connections are made.

All Devices:

Do not attempt repairs. Do not attempt to take apart, disassemble, service, or modify the hardware device or power supply.

Doing so could present risk of electronic shock or other hazard. Any evidence of any attempt to dissemble and/or modify

the device, including peeling, puncturing, or removal of any of the labels, will void the Limited

Warranty.

Do not abuse the device: Do not immerse the device to any liquid or expose to moisture. Clean only with dry cloth. Do

not use the device outside the specified operating temperature range of 5°C (41°F) to 35°C (95°F). If the device is

exposed to environment outside of its prescribed operation, turn off the device and allow

the temperature to stabilize

within the specified operating range before using the device.

Regulatory Information: Disposal of Waste Electrical and Electronic Equipment (WEEE) The Waste Electrical and Electronic

Equipment (WEEE) Directive aims to minimize the impact of electrical and electronic goods on the environment, by

increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on your V7

product or its packaging signifies that this product must be disposed separately from ordinary household wastes at

its end of life. Please kindly be aware that this is your responsibility to dispose electronic equipment at recycling

centers so as to help conserve natural resources.

Each country in the European Union should have its collection centers for electrical and electronic equipment recycling. For

information about your recycling drop off area, please contact your related electrical and electronic equipment waste

management authority or the retailer where you bought the product. Authorized Representative in European Community:

Ingram Micro Pan Europe GmbH, Heisenbergbogen 3, D-85609 Dornach / Munich, Germany. (www.V7-world.com)

Adjusting sound selections

1. Select Options, then Audio Format… A menu will open.

2. Change sound quality and attributes.

Setting the snapshot file size

1. Select File, then Allocate File Space…

2. Enter the desired file size in the Capture file size box, then click OK.

Setting the frame rate, color space, compression, or output

size

1. Select Options, then Video Capture Pin. The Properties menu

will open.

2. Change features by selecting them from their drop down menu,

then click OK.

Selecting still image pixels

1. Right-click the camera icon in the lower right hand corner of the

desktop.

2. Click Still Image and select your desired image pixel setting.

Setting the maximum video length

1. Select Capture, then Set Time Limit.

2. Check the Use Time Limit box and enter a time limit (in

seconds) in the Time Limit box.

3. Click OK when finished.

Adjusting special effects and other settings

1. Select Options, then Video Capture Filters. The Properties

menu will open.

2. Select a tab, make the desired changes, then click OK when

finished.

• Special Effects: Change image effects and add fun photo

frames. To reset to no effects select Normal.

• Face Tracking:

◦ Manually zoom the camera and move the zoom to one part

of the camera view.

◦ Change the tracking speed and use a picture-in-picture to

show what part of the camera view is being used in the

display.

◦ Choose the placement of the picture-in-picture.

• Face Effect: Add fun images and effects to your face. To reset

to no effects select Normal.

• Advanced: Flip the image horizontally or vertically.

• Proc Amp: Adjust the brightness, hue, saturation, sharpness,

white balance, backlight comp, and the anti flicker. Enter a

value into the appropriate box or slide the bar on each line to

the desired value. To reset the values to default, click Default,

then click OK.

• Camera Control: Adjust the exposure. Enter a value into the

appropriate box or slide the bar along the line to the desired

value. To reset the values to default, click Default, then click OK.

Safety and Maintenance Information

• Do not touch the lens with fingers or any sharp or coarse items.

• Use a soft cotton cloth to clean the lens.

• Do not use this product in extreme hot, cold, or dusty environments.

• Avoid dropping the webcam, as it may cause it to not work correctly.

Specifications

• Video capture up to 1280x1024 pixel

• Transmission Speed: 30FPS

• Interface: USB 2.0

• Focus: Manual Focus

• Distance: 5cm /1.9in to infinity

• Cable Length: 1.5 m / 4.9 ft

• Software upgrade for up to 16-mega pixel (optional)

• Automatic white balance (AWB)

• Automatic color compensation (ACC)

Product specificaties

Merk:	V7 Videoseven
Categorie:
Model:	CS1330

Heb je hulp nodig?

Als je hulp nodig hebt met V7 Videoseven CS1330 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding V7 Videoseven

V7 Videoseven LTV22HD Handleiding

3 Februari 2023

V7 Videoseven CS1330 Handleiding

3 Februari 2023

V7 Videoseven D22W12A Handleiding

3 Februari 2023

V7 Videoseven LED236W3 Handleiding

3 Februari 2023

V7 Videoseven NAV 740 Handleiding

3 Februari 2023

V7 Videoseven CS0300 Handleiding

3 Februari 2023

V7 Videoseven D1912B Handleiding

3 Februari 2023

V7 Videoseven LED215W2 Handleiding

3 Februari 2023

Handleiding

Nieuwste handleidingen voor

AEG Electrolux ce 270 0 vampyr Handleiding

8 November 2024

Techno Line WS 8055 Handleiding

12 Juli 2024

Techno Line WS 7024 Handleiding

12 Juli 2024

Techno Line WS 6767 Handleiding

12 Juli 2024

Techno Line WS 9170 Handleiding

12 Juli 2024

Techno Line WT 171 Handleiding

12 Juli 2024

Techno Line WS 7025 Handleiding

12 Juli 2024

Techno Line WS 9116 Handleiding

12 Juli 2024

Techno Line WS 9119 Handleiding

12 Juli 2024

Techno Line WS 8007 Handleiding

12 Juli 2024