V-Tac VT-61037 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor V-Tac VT-61037 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
INSTRUCTION MANUAL
LED BACKLIT PANEL
INTRODUCTION & WARRANTY
MULTI-LANGUAG
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. The products
are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
TECHNICAL DATA
MODEL VT-61037
SKU 23765, 23766
POWER 36W
LUMENS 4320 Lm
BEAM ANGLE 110°
CRI ≥80
DF ≥0.9
LIFE SPAN 20,000 Hours
ON/OFF CYCLE 10,000 Times
IP RATING IP20
OPERATING
TEMPERATURE -10°C to +35°C
INPUT POWER AC: 220-240V, 50/60Hz
DIMENSION 595x595x33.5 mm
RECESSED INSTALLATION
1
3 4
2
Please make sure to turn o the power before starting the installation.
Installation should only be done by a certified electrician.
Terminal block not included.
The light source of this luminaire is not replaceable, when the light source reaches its end of life
the whole luminaire should be replaced.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
For Indoor use only.
WARNING
INSTALLATION INSTRUCTIONS
This marking indicates that this
product should not be disposed
of with other household wastes.
Caution, Risk of electric shock
1. Make a hole ceiling
Blue N
Yellow & Green Ground
Brown L
3*0.75mm2
2. Put up the panel onto the ceiling
3. Connect cable into terminal as blow.
4. Turn on the switch, test
the fixture light on.
SURFACE INSTALLATION
1
3 4
2
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC WEST EUROPE LTD. GROUND FLOOR, 71 LOWER BAGGOT STREET, DUBLIN 02, IRELAND DO2 P593
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT PLEASE REACH OUT TO US AT
SUPPORT@VTACEXPORTS.COM V-TAC HOUSE, KELPATRICK ROAD, SLOUGH, BERKSHIRE, SL1 6BW, UK.
1. Made holes in the ceiling
and lead out the wire. 2. Wire and lamp wire docking.
3. Screw the lamp to the ceiling.
Screw Holes
4. Plug the screw hole
with a so rubber plug.


Product specificaties

Merk: V-Tac
Categorie: Niet gecategoriseerd
Model: VT-61037

Heb je hulp nodig?

Als je hulp nodig hebt met V-Tac VT-61037 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd V-Tac

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd