Universal Audio Solo/610 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Universal Audio Solo/610 (24 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
SOLO/610
Classic Tube Preamplifier
& DI Box
Universal Audio Part Number 65-00055
Revision B
Universal Audio, Inc.
1700 Green Hills Road
Scotts Valley, CA 95066-4926
www.uaudio.com
Customer Service & Tech Support: +1-877-MY-UAUDIO
Business, Sales & Marketing: +1-866-UAD-1176
Outside USA: +1-831-440-1176
ii
Notices
This manual provides general information, preparation for use, and operating instructions for the
Universal Audio SOLO/610 Classic Tube Preamplifier & DI Box.
Disclaimer
The information contained in this manual is subject to change without notice. Universal Audio, Inc.
makes no warranties of any kind with regard to this manual, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose. Universal Audio, Inc. shall not be
liable for errors contained herein or direct, indirect, special, incidental, or consequential damages in
connection with the furnishing, performance, or use of this material.
Copyright
© 2011 Universal Audio, Inc. All rights reserved.
This manual and any associated artwork, product designs, and design concepts are subject to
copyright protection. No part of this document may be reproduced, in any form, without prior written
permission of Universal Audio, Inc.
Trademarks
SOLO/610, 4-710d, 710, Twin-Finity, 4110, 8110, SOLO/110, 2-610, LA-610, LA-2A, 2-LA2, LA-3A,
6176, 1176LN, 2-1176, 2192, DCS Remote Preamp, UAD, and the Universal Audio, Inc. logo are
trademarks of Universal Audio, Inc. Other company and product names mentioned herein are
trademarks of their respective companies.
Box Contents
The retail package should contain:
(1) Universal Audio SOLO/610 unit
(1) User Manual
(1) IEC Power Cable
(1) Warranty Registration Card
(1) UA Full Line Catalog
iii
Important Safety Information
Before using this unit, be sure to carefully read the applicable items of these operating instructions and the
safety suggestions. Afterwards, keep them handy for future reference. Take special care to follow the warnings
indicated on the unit, as well as in the operating instructions.
1. Water and Moisture - Do not use the unit near any source of water or in excessively moist environments.
2. - Object and Liquid Entry Care should be taken so that objects do not fall, and liquids are not spilled, into
the enclosure through openings.
3. - Ventilation When installing the unit in a rack or any other location, be sure there is adequate ventilation.
Improper ventilation will cause overheating, and can damage the unit.
4. - Heat The unit should be situated away from heat sources, or other equipment that produce heat.
5. - Power Sources The unit should be connected to a power supply only of the type described in the
operating instructions, or as marked on the unit.
6. Power Cord Protection - AC power supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them. Pay particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the unit. Never take hold of the plug or cord
if your hand is wet. Always grasp the plug body when connecting or disconnecting it.
7. Grounding of the Plug - This unit is equipped with a 3-wire grounding type plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding type power outlet. This is a safety feature. If you -
are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do
not defeat the purpose of the grounding- type plug.
8. - Cleaning Follow these general rules when cleaning the outside of your SOLO/610:
a. Turn the power Off and unplug the unit
b. Gently wipe with a clean lint- free cloth
c. If necessary, moisten the cloth using lukewarm or distilled water, making sure not to oversaturate it
as liquid could drip inside the case and cause damage to your SOLO/610
d. Use a dry lint- free cloth to remove any remaining moisture
e. Do not use aerosol sprays, solvents, or abrasives
9. - Nonuse Periods The AC power supply cord of the unit should be unplugged from the AC outlet when left
unused for a long period of time.
10. Damage Requiring Service - The unit should be serviced by a qualified service personnel when:
a. Objects have fallen or liquid has been spilled into the unit; or
b. The unit has been exposed to rain; or
c. The unit does not operate normally or exhibits a marked change in performance; or
d. The unit has been dropped, or the enclosure damaged.
11. Servicing - The user should not attempt to service the unit beyond that described in the operating
instructions. All other servicing should be referred to qualified service personnel. See Service &
Support” on page 24 for servicing information.


Product specificaties

Merk: Universal Audio
Categorie: Receiver
Model: Solo/610

Heb je hulp nodig?

Als je hulp nodig hebt met Universal Audio Solo/610 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Universal Audio

Handleiding Receiver

Nieuwste handleidingen voor Receiver