Unicol PGG Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Unicol PGG (4 pagina's) in de categorie Projector accessoire. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for pinch
points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any spring
loaded parts. Before installing, make sure that the supporting surface will support five times the combined
load of the solution and the hardware. Never exceed the maximum load capacity. Please also layout all
components to ensure that you have all of the required parts before proceeding (see BOM list on following
page). Use of this product for anything other than its specified use may result in failure or personal
injury. This product is intended for indoor use only. We recommend using a qualified trades person for
installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Revised 05/01/24
01865 767676
sales@unicol.com
www.unicol.com
*Please check model specific details before installing*
PGG / PGL / PGM / PGS / PGW / PGX
Screen Size: Guide Max. Weight: n/a 20kg
2Revised 05/01/24
COMPONENTS
01865 767676
sales@unicol.com
www.unicol.com
INSTALLERS REQUIRED
1
# DESCRIPTION QTY
1Guardbox Body 1
2Locking Plate 1
3Keys for Built-In Lock 2
4Security Bars 3
#TOOLS REQUIRED
14mm & 5mm Allen Keys
2Pozi Head Screwdriver
319mm Spanner
417mm Spanner
3
4
1
2
01865 767676
sales@unicol.com
www.unicol.com
3
Revised 05/01/24
STEP 1
Place projector inside the Guardbox cage. Ensure
that it rests on the two adjustable rail inside the cage.
STEP 2
Drop the security bars into position as shown above.
Make sure that the projector lens is not covered or
restricted by the bars.
STEP 4
Take the locking plate and slide it over the front half
of the top of the Guardbox. This should slide over the
column socket fixings, protecting them from being
tampered with.
Once positioned, use the keys to secure the locking
plate. Take a record of the numbers located on the
keys for replacement purposes.
STEP 3
Before placing the Lcok Slider Plate, place your
ceiling suspension column into the socket. Ensure
that the holes in the column line up with the hole in
the column. Thread the through-bolt through the
hole in the socket and secure.
Next, tighten the grub screws located either side of
the through-bolt hole.


Product specificaties

Merk: Unicol
Categorie: Projector accessoire
Model: PGG

Heb je hulp nodig?

Als je hulp nodig hebt met Unicol PGG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Projector accessoire Unicol

Handleiding Projector accessoire

Nieuwste handleidingen voor Projector accessoire