Unicol HTS2 Handleiding

Unicol Niet gecategoriseerd HTS2

Lees hieronder de 📖 handleiding in het Nederlandse voor Unicol HTS2 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 209 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

WARNING

Please carefully inspect the product before assembling. If you notice any apparent damage, call your

carrier claims agent and do not continue the installation until it has been reviewed. Please watch for

pinch points. Do not put your ﬁngers between moveable parts. Do not tamper with or disassemble any

spring loaded parts. Before installing, make sure that the supporting surface will support ﬁve times the

combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also

layout all components to ensure that you have all of the required parts before proceeding (see BOM list

on following page). Use of this product for anything other than its speciﬁed use may result in failure or

personal injury. This product is intended for indoor use only. We recommend using a qualiﬁed trades

person for installation. Use an assistant or lifting equipment to lift and position products.

For support, please call: +44 (0)1865 767676 or email: sales@unicol.com

Revised 15/12/20

01865 767676

sales@unicol.com

www.unicol.com

*Please check model speciﬁc details before installing*

HTS1 / HTS2

Screen Size: Guide Max. Weight: 46-110” 60-110kg

01865 767676

sales@unicol.com

www.unicol.com

2Revised 15/12/20

COMPONENTS

INSTALLERS REQUIRED

1-2

# DESCRIPTION QTY

1Screen Rails 2

2Screen Arms 2

3Main Slider Body (inc. Cable Management) 1

4Removeable Equipment Tray 1

5Locking Keys 2

6Universal Fixing Kit 1

#TOOLS REQUIRED

1 Pozi Head Screwdriver

2 2.5mm Allen Key

3 4mm Allen Key

1 2

01865 767676

sales@unicol.com

www.unicol.com

Revised 15/12/20

centre of screen

check distance

a = ( HTS1: 339mm // HTS2: 224mm )

POSITIONING OF SERVICES STEP 1

Remove screws from handle in transport position.

Re-attach handle (as shown above) using the same

screws.

STEP 2

Gently pull on the lip of the cassette to release it.

Remove it from the slider body. Populate with your

media equipment.

STEP 3

Mark where you’d like the centre of the screen to

sit on the wall. Using the dimensions above, mark

and then ﬁx top rail to wall.

Please note - the dimensions above are based on

VESA ﬁxings being central to the screen. You may

need to adjust if your VESA ﬁxing points are offset.

Recommended position - opposite side to the

cassette/above and below HTS body. Screen

size dependant.

Do position services within body of HTS or NOT

within cassette path. Dependant on installation

positioning, see Step 4 - check before installing.

Additional space for max depth 90mm -

dependany on installation positioning, see Step

4. Check before installing.

Product specificaties

Merk:	Unicol
Categorie:	Niet gecategoriseerd
Model:	HTS2
Kleur van het product:	Zwart
Diepte:	95 mm
Hoogte:	568 mm
Maximale gewichtscapaciteit:	60 kg
Paneelmontage-interface:	200 x 200,600 x 400 mm
Verbeterd kabelbeheer:	Ja
Type product:	Steun
Maximale schermgrootte:	70 "
Minimale schermgrootte:	46 "
Verstelbare breedte:	Ja
Breedte instelbereik:	680 - 1575 mm