Ultimate Support IQ-2000 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Ultimate Support IQ-2000 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 164 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
4
800.525.5628 . www.ultimatesupport.com . Copyright 2010, Ultimate Support Systems . All Rights Reserved
warranty registration
Visit www.ultimatesupport.com for a quick and convenient process for registering your new
Ultimate Support product. Warranty Registration and Proof of Purchase are required for warranty
fulfilment. Full Limited Lifetime Warranty and Ultimate Protection Plus Premium Service and
Support Plan details are available online under Music Gear & Instrument Stands / Customer Support.
Revision 6, 03.21.09 . Product Manual Item #14036M
IQ-1000
ITEM #13231
IQ-2000
ITEM #13241
IQ-3000
ITEM #14036
IQ SERIES® KEYBOARD STAND
Load Capacity:
300 lbs. (136.1 Kg)
Load Capacity:
150 lbs. (68.2 Kg)
Load Capacity:
100 lbs. (45.5 Kg)
1. Stand the IQ-3000 upright with longer tubes on the floor and
Memory Lock facing you. Open the IQ-3000 up about 12".
2. Loosen Memory Lock knob by turning it counter-clockwise
about five (5) complete turns (being sure not to over loosen).
3. Holding Memory Lock front plate in left hand and back plate
in right hand, rotate plates in opposite directions and align
“hash marks to set desired height setting. There are nine
(9) height options.
4. Tighten Memory Lock knob clockwise.
5. Open IQ-3000 fully.
STEP 3
STEP 2
STEP 1
STEP 4
STEP 5
1. Set the IQ-1000 or IQ-2000 upright so that the longer leg
tubes are on the floor. Fully open the stand to the pre-set
position (there should be a noticeable resistance as the
plate catches the leg detent).
2. With the Memory Lock facing you, hold top left tube with
left hand and with your right hand pull the Memory Lock
knob toward you, being sure to fully retract the pin from
the Memory Lock plate.
3. Holding the extracted Memory Lock pin with right hand, pivot
the X” brace with left hand to desired height and release pin.
Be sure the Memory Lock is fully and securely engaged before
placing keyboard on stand.
STEP 1
STEP 2
STEP 3
IQ-3000/IQ-2000/IQ-1000
1. Open stand to fully open position.
2. If stand rocks on an uneven surface, turn black end cap
on bottom tube to a different thickness to correct.
3. End cap on top tube can also be adjusted to secure keyboard.
STEP 1 - 3
IQ-3000 SETUP INSTRUCTIONS IQ-1000 / IQ-2000 SETUP INSTRUCTIONS
ADJUSTING END CAPS
32
NOTE: Your IQ-1000 or IQ-2000 will open to this height every
time you use it unless a new height is desired. Repeat steps
1-3 to change height setting.
NOTE: Your IQ-3000 will open to this height every
time you use it unless a new height is desired.
Repeat steps 1-5 to change height setting.


Product specificaties

Merk: Ultimate Support
Categorie: Niet gecategoriseerd
Model: IQ-2000

Heb je hulp nodig?

Als je hulp nodig hebt met Ultimate Support IQ-2000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Ultimate Support

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd