Twisted Electrons Acid8 MKIII Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Twisted Electrons Acid8 MKIII (1 pagina's) in de categorie Synthesizer. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
-ACCENT
-(H)SHIFT+TEMPO= SWING
-(H)SHIFT+ = PW
-(H)SLIDE= SLIDE TIME
-ARP RANGE
-SPINDOWN SPEED
1
2
3
4
5 6
7
8
9
10
11
12
MASTER
VOLUME
FILTER
CUTOFF FREQ.
FILTER
RESONANCE
-FILTER ENV.
-WOBBLE AMOUNT*
-FILTER ENV.
DECAY TIME
-WOBBLE SPEED*
-ARP FALL TIME
*
LIVE RECORD MODE ON/OFF: (H)SHIFT + PLAY (RELEASE PLAY BEFORE SHIFT) SPINDOWN EFFECT: (H)PLAY + SLIDE
STUTTER EFFECT: (H)PLAY + REST
RECORD KEY CHANGE SEQUENCE: (WHEN RUNNING) (H)PLAY + SEQUENCE OF KEYS 1-12
SET WOBBLE, CRUSH & ARP: (H)SHIFT+ ARP, W & CRUSH
CHANGE SYNC MODE: (H)SLIDE + KEYS 1-6 (SEE OTHER SIDE FOR DETAILS)
SHORTEN PATTERN (RESET STEP): SELECT A STEP, THEN (H)PLAY+ (H)SHIFT+ REST
TRANSPOSE PLAYBACK: (WHEN LESS THAN 2 KEY CHANGES ARE RECORDED) (H)PLAY+ KEYS 1-12
CHANGE PATTERN: (H)SHIFT + PAT CHAIN PATTERNS: CHANGE PATTERN MULTIPLE TIMES , WITHOUT RELEASING SHIFT WHEN RUNNING
CLEAR/RANDOMIZE: (H)SHIFT + REST 4 TIMES: 1st & 2nd=TOGGLES ALL RESTS 3rd=CLEARS PATTERN, 4th=RANDOMIZES PATTERN
(H) = Hold
VIDEO TUTORIALS: www.twisted-electrons.com
SETUP install 2 fresh AAA batteries (be
careful of their orientation!) or connect a
micro-USB cable.
BATTERY MODE set the power switch to
the right position to power the synth from
the batteries.
USB-POWER MODE set the power
switch to the left position to disconnect
the batteries and draw power from an
optional micro-USB cable.
CONNECTIVITY the left jack is for input
and the right jack is for output.
SYNC MODES the output and input jacks
have different functions depending on
the SYNC MODE. hold SLIDE and press
KEYS 1 to 6 to select from the 6 following
modes:
Mode0 input stereo output stereo
Mode1 input stereo output mono/sync
Mode2 input sync output stereo
Mode3 input sync output mono/sync
Mode4 input mono/sync output stereo
Mode5 input mono/sync output mono/sync
When mono/sync is active the left chan-
nel (tip) will send or recieve click track and
the right channel (ring) will send or
recieve audio.
CREATE PATTERNS 3 ways to create
patterns:
-step by step: when not running simply
play a sequence of keys. The step will
advance on each key press.
-step edit: when running change the
selected step by holding shift and press-
ing the step < and > buttons, and change
the note with the keys.
-live record (real time): activate record by
holding shift and pressing and releasing
run without releasing shift. Now the key
LEDS are flashing and you can punch in
notes when the sequencer is running.
Repeat the procedure to deactivate
record.
COPY/PASTE Hold slide and press oct-
to copy and oct+ to paste a pattern
CHANGE PATTERN you have 16
patterns to choose from. Hold shift and
press pat < and > keys to change the
current pattern.
CHAIN PATTERNS change pattern
multiple times with sequencer running
without releasing shift to chain up to 16
different patterns to create a song.
TRANSPOSE PLAYBACK you can
change the key of the playback by
holding run and pressing any keys 1 to
12.
KEY CHANGE SEQUENCE record a
sequence of up to 16 key changes by
holding run and pressing a sequence of
keys 1 to 12
REST/UNREST ALL, CLEAR &
RANDOM hold shift and press rest
multiple times (without releasing shift) to
turn on rest for all steps, then off for all
steps, press rest a third time to reset the
entire pattern. Press rest a 4th time to
randomize the pattern.
CHANGE WAVEFORM hold shift and
press square, saw or triangle to cycle
through the 4 flavors of each waveform:
Normal, Distorted, Fat and Harmonized.
CHANGE TEMPO hold shift and press
tempo multiple times to tap the tempo
APPLY SWING hold shift and tempo.
Now the accent knob adds swing to the
groove.
SHORTEN PATTERN you can make the
pattern reset at a specific step to shorten
it.
Hold run and shift then press rest to make
a step reset.
APPLY ARP, WOBBLE & CRUSH FX hold
shift and press arp, w or crush to toggle
the fx on or off.
MONITOR MODE hold rest and press
play, to toggle the monitor mode on or
off.


Product specificaties

Merk: Twisted Electrons
Categorie: Synthesizer
Model: Acid8 MKIII

Heb je hulp nodig?

Als je hulp nodig hebt met Twisted Electrons Acid8 MKIII stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Synthesizer Twisted Electrons

Handleiding Synthesizer

Nieuwste handleidingen voor Synthesizer

2hp

2hp EG Handleiding

30 Januari 2025
2hp

2hp Clk Handleiding

30 Januari 2025
2hp

2hp Arp Handleiding

30 Januari 2025
2hp

2hp Grain Handleiding

30 Januari 2025
2hp

2hp Pluck Handleiding

30 Januari 2025
2hp

2hp Freez Handleiding

30 Januari 2025
2hp

2hp Euclid Handleiding

30 Januari 2025
2hp

2hp Brst Handleiding

30 Januari 2025
2hp

2hp VCA Handleiding

30 Januari 2025
2hp

2hp TM Handleiding

30 Januari 2025