Turing TRMR64RB Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Turing TRMR64RB (18 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18
SMART INSTALLATION QSG
Smart Series NVR and BridgeTUR-SI-QSG-V18
For Installer Only
Internet Access Required
Congratulations on your purchase of the TURING Smart Series IP Cameras and NVR system!
This system provides Video Surveillance as a Service features with local storage and
connectivity - as as well as cloud storage capabilities.
PARTS : Check to be sure the following parts have been included in your purchase. If anything is missing,
please contact our support at support@turingvideo.com.
Peripherals Needs ( Not Included )
What's in the box
HDMI CableMonitor Network Cable
CATS / CAT6
Internet Access
TURING SMART SERIES NVR
NVR Hardware
Accessories Box
Power cord
SATA cable
TURING BRIDGE TV-SERVER
Bridge Hardware
Power adapter
Available Ports
GROUND SCREW
GROUND SCREW NETWORK
AUDIO OUT
CVBS
AUDIO IN HDMI
VGA USB
12V DC OUTPUT
USB
eSATA
RS232
RS485
ALARM I/O
NVR PART NUMBERS: TR-MR32R, TR-MR64R
NVR PART NUMBERS: TR-MRP04(2T), TR-MRP08(2T), TR-MRP16(4T)
AUDIO IN
AUDIO OUT
VGA
HDMI Power Supply
Power Supply
Alarm I/O ON/OFFNETWORKPoE PoE
ON/OFF
NVR PART NUMBERS: TR-MRP04(2T), TR-MRP08(2T), TR-MRP16(4T)
Installing Hard Drive
If you need to install a drive into the
NVR, use a Phillips head screwdriver and
remove four rear screws and two side
screws.
Lift cover oļ¬€ and position the drive over
the holes shown below.
Insert four screws under the NVR and
connect them to the four holes in the
bottom of the drive.
DRIVE
FR ON T
REAR
NVR PART NUMBERS: TR-MRP04(2T), TR-MRP08(2T), TR-MRP16(4T)
Insert the driveā€™s SATA data and power supply cables to the control board as shown below.
Installing Hard Drive
Data cables and power cables
be inserted into the control board
er. For a single drive, you must
ct it to HD1, and for a second drive,
ust connect it to HD2. Be sure not
any ports, in order for the NVR to
on properly.
REAR
FR ON T
*The image is for illustration only. Insert the HDD SATA and
power cables in the order indicated on the NVR control board.
Installing Hard Drive
NVR PART NUMBERS: TR-MR32R, TR-MR64R
To install a drive into the NVR, remove
the two rear screws and four side screw
using a Phillips head screwdriver.
Lift the cover oļ¬€ and swing the
mounting plate out of the base.
Position the drives into the mounting
plate. Be sure to align the four holes in
each of the drives with the correspond-
ing holes in the plate.
Insert and tighten screws to secure eac
drive to the mounting plate and
re-insert plate back down into base.
MOUNTING PLATE DRIVE
FR ON T
REAR
Installing Hard Drive
NVR PART NUMBERS: TR-MR32R, TR-MR64R
Insert the driveā€™s SATA data and power cables to the control board as shown.
TE: Data cables and power cables
st be inserted into the control board
rder. For a single drive, you must
nect it to HD1, and for a second drive,
must connect it to HD2. Be sure not
kip any ports, in order for the NVR to
ction properly.
REAR
FR ON T
For NVRs with PoE ports: Connect the cameras to PoE ports on the NVR.
For NVRs without PoE ports or cameras
connected via the local network: Set up the bridge, the NVR, and the cameras
on the same local network.
Wiring and connections
120V OUTLET
(Optional)
Router
Turing Bridge
Smart NVR
TURING Smart Series can be activated online using the web address below
on a computer or by using a smartphone with the TURING app below.
Create an account for your customer
Go to HTTPS://AI-VIDEO.TURINGVIDEO.COM
Scan the QR code to download the TURING Mobile app.
1. To get started
2. Sign in or sign up
Create an account for your customer and enter
their business information if they are new
to our service.
Log in to your customerā€™s account
if they already have one.
Enter your TPP info to view the customer's contact and device information on the Turing Partners Portal for
adding and managing licenses.
When prompted, ask your customer for permission to monitor their system health and install updates.
By clicking "Allow," you can perform the following actions on behalf of your customer from the Partners Portal:
* Device health monitoring
* OTA system/ļ¬rmware upgrades
* Remote device reboot
3. To get started
For new user accounts:
For existing accounts:
If your customer already has an account, under Settings, select "Your Dealer Info" and enter your TPP number.
Create an account for your customer
1 2 3 4 5 6 7
Your dealer may assist you with technical support. Thus, your contact
information and device information may be shared with them.
Your dealer can also monitor system health and install updates for you. By
clicking "Allow," you authorize the dealer to perform the following tasks on your
behalf:
Ā· Remote device health monitoring
Ā· Over-the-air system/ļ¬rmware upgrades
Ā· Remote device restart
You can decide later at [Settings] > [Proļ¬le] > "Yes, allow my dealer to monitor
system health and install updates."
Iā€™ll decide Later Allow
Activating the System
Click or tap ā€œAdd Camerasā€ and follow the instruction to add and activate your systems.
ON A COMPUTER ON A SMARTPHONE
Sites are locations where your bridge, NVR, and
cameras are grouped together.
Sites make it easy to view and search events
and manage users' access and permissions.
Bridge connects your devices to Turing's
cloud, so you can make the most of
Turing Al. To add a bridge, enter its
MAC address or scan its QR code.
You can also select from the list of
existing bridges.
Activating the System
Create or
Select Site
Add Bridge MAC addr e s s
QR Co d e
Conļ¬guring AI Detection
For Turing cameras
For third party cameras
Once the cameras are successfully added, continue to the camera settings to conļ¬gure AI detections.
Once the cameras are successfully added, please select the camera and follow the onscreen instructions.
1. Select the camera you want to conļ¬gure.
2. Select and enable INTRUSION DETECTION
or ENTER AREA.
3. Once enabled, click ā€œ + New Areaā€.
4. Draw four points to deļ¬ne the area
of interest on the camera view;
5. Conļ¬gure the parameters as needed;
6. Repeat steps 3-5 to add detection areas.
7. Click ā€œSaveā€ to save the settings.
The product must be installed and protected in a location that is not easily accessible,
and is away from impacts or heavy vibration.
Do not install the product on an unstable mount or surface.
Do not disassemble the camera or perform maintenance task when power is connected.
The product should be used in compliance with local laws and regulations.
Before installation, the product should be stored in a dry and ventilated environment.
Use only accessories that comply with the technical speciļ¬cations of the product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Safety
1. Document Purpose and Scope
2. Turing AIā€™s Responsibility
3. Product Warranty
4. General Return Requirements and Instructions
5. Return for Credit Policy
6. Advance Replacement
Limited Warranty
Turing AIā€™s sole responsibility under the Turing warranty is limited to repairing or replacing the defective products returned by authorized distributors and direct purchasers. The warranty does not apply
to any product where damage has been caused by accident, abuse, misuse, neglect, mishandling, misapplication, modiļ¬cation, improper operation, improper repair, any unauthorized disassembly or
rework, or natural disaster. Turing AI reserves the right to examine the returned products. If the damage on the product is caused by improper action as described above, the direct purchaser or
authorized distributor shall be liable for paying the related charge having occurred or paying the price of the replacements if the returned products are discarded. For details on the product warranty
provided by Turing for the respective products, please refer to the following.
RMA Inquiry: Prior to returning product(s), please reach out to your direct point of purchase for return options. Turing only accepts returns from direct purchasers and/or authorized distributors.
Direct purchasers or distributors must obtain an authorized RMA # from the Turing RMA Team via email rma@turingvideo.com.
To obtain authorization, direct purchasers or distributors can request via email at rma@turingvideo.com. Once the form is completely ļ¬lled out and required documents are available i.e Proof of
Purchase and Replacement Proof, please submit the form and documents to rma.usa@turingvideo.com for processing. Note that the RMA number approved must be clearly written in black or blue
ink in large type on the outside of all returned packages. Turing will refuse the package(s) without an RMA number and return the product to the customer with freight due.
Expiration: An RMA number is valid for thirty (30) calendar days after its issuance by Turing. The distributor must return the product described in the RMA, or else a new RMA number will be required. If
Turing does not receive the product(s) within the allowed time frame, the RMA will be closed and returns may be refused, potentially delaying the process.
Turing has a 30-day return policy for both hardware and software. Warranty begins from the date the distributor ships the product to dealers/end-users. The dealer or end-user is required to send the
product(s) back to the distributor for return processing. Distributors must submit a return authorization request with Turing via the RMA form. Returns outside the 30-day time period are not eligible for
credit. Product(s) that have been painted tampered with, serial number removed, or any other modiļ¬cations will void the credit warranty. These product(s) may be repaired but fees may apply. Please
contact the RMA team: rma@turingvideo.com for the RMA number and return credit.
Turing has a one (1) year warranty policy for replacement/returns. Dealers/end-users must send the product(s) back to the distributors. Distributors may then oļ¬€er an over-the-counter exchange option
if the product is available at the branch.
Repair: The distributor must ļ¬ll out and submit the RMA form with all the required information to assist the repair department with diagnosing and repairing the item. Out-of-warranty items require
written authorization from the customer. If an item is deemed ā€œunrepairableā€ the customer is contacted and has the option of (1) having the product returned, (2) having the product scrapped, or (3)
purchasing a new unit as a replacement. Non-Turing product(s) received from an approved Turing Repair RMA, including Hard Drives not sold by Turing will not be repaired nor replaced. The product(s)
will be shipped back as is to the sender.
Freight Charges: The direct purchaser or authorized distributor will pay inbound freight of the returned product and Turing will pay the ground outbound freight of the repaired product to the
customer.
Packaging Requirements: All returned products must be packaged to aļ¬€ord individual mechanical protection so damage does not occur while the product is in transit to Turing. In addition, the
packaging must provide proper electrostatic discharge (ESD) protection. All packaging should be comparable to the packaging in which Turing originally shipped the product. For multiple packages, each
package must be labeled with the approved RMA number and properly sealed, and a copy of the RMA form must be enclosed with the shipment. The distributor or customer must enclose a packing list
identifying the contents in each shipping carton. Turing is not responsible for packages or items received damaged in transit, the credit will be voided for Credit RMAs, and repair fees will apply for Repair
RMAs.
Lost Package(s) in Transit Credit Request: Turing must be notiļ¬ed in 15 days from the expected delivery date of Purchase Orders not received / shipments possibly due to Lost in Transit. It will be
investigated by both our warehouse and the carrier. The party that covered the freight charges will be responsible for ļ¬ling the claim with the carrier for credit purposes. Turing credit is not guaranteed
until the claim is determined. On that note, Turing will make the ļ¬nal conclusion according to the case and eligibility for credit.
Server Return: Once the software service is terminated the server will need to be returned to Turing, please contact the RMA team: rma@turingvideo.com for return details. If the server is not returned
after the contract termination, a penalty will be applied. Please refer to the Master Service Agreement for the details.
Amending this Policy: Turing may choose to amend the Policy, in part or its entirety, at any time, without notice.
You can ļ¬nd the most updated and complete Turing RMA policy here: https://turing.ai/legal/rma-policy
Software Maintenance: Turing warrants the software within the active subscription period.
Hardware Warranty:
+ 36 months repair warranty on IP cameras and NVRs.
+ Servers are warrantied within the active subscription period.
This document addresses return policies applicable to the products that are purchased by authorized distributors of Turing AIā€™s products and that are returned to Turing AI for repair or return.
https://turing.ai/
Contact us at
or visit
Support:
866.816.7426
support@turingvideo.com
Ā© Copyright 2022 Turing AI. All Rights Reserved.


Product specificaties

Merk: Turing
Categorie: Bewakingscamera
Model: TRMR64RB

Heb je hulp nodig?

Als je hulp nodig hebt met Turing TRMR64RB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Turing

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera