Tryton THL2000 Handleiding

Tryton Niet gecategoriseerd THL2000

Lees hieronder de 📖 handleiding in het Nederlandse voor Tryton THL2000 (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/24
THL2000
Инструкция по эксплуатации
Oryginalna instrukcja obsługi
Instruction manual
Instrucţii de folosire
RO
Lietošanas instrukcija
LV
RUТЕРМОВОЗДУХОДУВКА ...............................................
DMUCHAWA GRZEJNA (OPALARKA) ..............................
HOT AIR GUN (HEAT GUN) ... ............. ...............................
PISTOLUL CU AER CALD.................................................
KARSTĀ GAISA PLŪSMAS ĢENERATORS ......................
7
3
11
16
20
E L E K T R O N A R Z Ę D Z I A
2
A
B
1
23
5
4
3
INSTRUCTION MANUAL
Original text translation
HOT AIR GUN (HEAT GUN) THL2000
BEFORE YOU START USING THE MACHINE READ
THOROUGHLY THIS MANUAL.
Keep this document for future reference.
WARNING! Read all safety warnings marked with a
symbol and all operating safety instructions.
WARNING! General warnings regarding the use of
power tools.
Electric safety:
WARNING! General warnings regarding the use of
power tools.
Use and taking care of your power tool :
a) Do not overload your power tool. Use a power tool with
power adjusted to work being done. An appropriately chosen
power tool will allow you to work better and safer under load it has
been designed for.
b) Do not use a power tool when its power switch is out of order
(it does not switch it on or off ). Any power tool with its power
switch out of order is dangerous and must be repaired.
c) Always disconnect the plug from the power source and/or
disconnect its battery before changing any settings,
performing replacement or storage. Such preventive measures
reduce the risk of accidental power tool start up.
WARNING! General warnings regarding the use of d) Keep your power tool out of reach of children and do not
power tools. allow unauthorized persons to use the power tool. Power tools
Personal safety:in hands of untrained persons can be dangerous.
To limit the risk of fire, electric shock and injury while using the device,
follow all operating safety instructions and tips provided below.
Keep all work safety instructions and tips for future reference.
In warnings provided herein the expression “power tool” means a power
tool powered from the mains (with a power cord) or a battery powered
power tool (cordless).
WARNING! General work safety warnings for use of
the tool.
Workplace safety:
a) Keep your workplace tidy and well lit. Untidiness and bad lighting
result in higher accident rate.
b) Do not use the power tool in explosive environments, created
by flammable liquids, gases or dusts. The power tool generates
sparks that can ignite dust or vapors.
c) Keep children and unauthorized persons away from the place
where the power tools are used. Inattention may result in losing
control over your power tool.
a) Plugs used in power tools must match wall outlets. Never
modify the plug of your power tool. Do not use any extension
c ab le s w he n o pe rati ng a p ow er t o ol wi th a
grounding/earthing conductor (PE). Any modifications of plugs
and outlets increase the risk of electric shock.
b) Avoid touching earthed surfaces or grounded items like
pipes, heaters, central heating radiators and refrigerators.
Touching earthed or grounded surfaces increases the risk of electric
shock.
c) Do not expose your power tool to rain or damp environments.
Water penetrating the tool increases the risk of electric shock.
d) Do not damage the power cord. Never use the power cord to
carry, pull the power tool and do not pull by its power cord to
disconnect plug from the outlet. Keep the power cord away
from sources of heat, oils, sharp edges and moving parts.
Damaged or entangled power cords increase the risk of electric shock.
e) When your power tool is operated outdoors use extension cords
intended for outdoor use only. Using an extension cable intended for
outdoor use decreases the risk of electric shock.
f) When it is unavoidable to use your power tool in a damp
environment use an RCD (Residual Current Device) for
protection. The use of RCDs decreases the risk of electric shock.
a) This equipment is not intended for use by persons (including
children) disabled physically , mentally, sensorial or persons
with no experience and knowledge in operating the
equipment unless they operate the equipment under
supervision or follow user's instructions provided by persons
responsible for their safety.
b) It is necessary to predict steps, watch and keep common
sense when using power tools. Do not operate power tools
when you are tired, under influence of drugs, medicine or
alcohol. A moment of inattention while operating a power tool may
result in serious personal injury.
c) Use personal protective equipment (PPE). Always wear safety
goggles. Wearing personal protective equipment (PPE) including a
dust mask, anti-slippery footwear, a helmet and ear protection reduces
personal injury.
d) Avoid unexpected start up. Before connecting your power
tool to the mains and/or inserting a battery make sure its
power switch is in off position. Carrying your power tool with a
finger on its power switch or without disconnecting it from the mains
(switched on) may result in an accident.
e) Before starting your power tool remove any keys/wrenches.
Leaving a key/wrench in the rotating part of your power tool may result
in personal injury.
f) Do not lean forward too far. Always remain stable and
maintain balance. It will allow you to have a better control over your
power tool in unpredictable situations.
g) Wear appropriate clothing. Do not wear loose clothes or
jewelry. Keep your hair tied. Keep your clothes away from
moving parts. Loose clothes, jewelry or long hair may be caught by
moving parts.
h) If your power tool allows for using an external dust
extraction or collection system, make sure it is connected
and used properly. Using dust collectors may reduce dust
affected risks.

Product specificaties

Merk: Tryton
Categorie: Niet gecategoriseerd
Model: THL2000

Heb je hulp nodig?

Als je hulp nodig hebt met Tryton THL2000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Tryton

Tryton

Tryton TJ3LD Handleiding

21 November 2023
Tryton

Tryton THL1800 Handleiding

21 November 2023
Tryton

Tryton THL2000 Handleiding

16 November 2023
Tryton

Tryton THL2000B Handleiding

15 November 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Protector

Protector AS-5030.3 V2 Handleiding

21 December 2024
Sabrent

Sabrent AU-MMCW Handleiding

21 December 2024
Sabrent

Sabrent AU-2X35 Handleiding

21 December 2024
Sabrent

Sabrent CB-RS232 Handleiding

21 December 2024
Owon

Owon 500W Handleiding

21 December 2024
Owon

Owon 300W Handleiding

21 December 2024
Sabrent

Sabrent SB-RKTQ4-1TB Handleiding

21 December 2024
Sabrent

Sabrent SB-RKTQ-1TB Handleiding

21 December 2024
Sabrent

Sabrent SB-ROCKET-1TB Handleiding

21 December 2024
Sabrent

Sabrent SB-HTSS Handleiding

21 December 2024