Trust Direct WebScan 19200 Handleiding

Trust Scanner Direct WebScan 19200

Lees hieronder de 📖 handleiding in het Nederlandse voor Trust Direct WebScan 19200 (14 pagina's) in de categorie Scanner. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/14

TRUST DIRECT WEBSCAN 19200

U K

Method when using for the first time Chapter

1. Uninstalling old drivers and devices (3.1)

2. Installing the TWAIN driver (3.2)

3. Installing FineReader Sprint (3.3)

4. Installing Photo Express (3.4)

5. Connecting the scanner (3.5)

6. Testing (4)

1 Introduction

This instruction manual is for users of the TRUST DIRECT WEBSCAN 19200 V2.0.

The TRUST DIRECT WEBSCAN 19200 V2.0 is a 600x1200 dpi, high resolution,

USB scanner with a slim-line design. You can use it to produce optimal results with

48-bit colour scanning.

The Direct Scan buttons on the scanner allow you to easily scan, copy, fax and e-

mail at the touch of a button.

2 Safety

Carefully read the following instructions before use.

- The TRUST DIRECT WEBSCAN 19200 does not require any special

maintenance. Use a slightly damp, soft cloth to clean the scanner.

- Do not use aggressive substances, such as white spirit, to clean the device.

These may harm the material.

- Do not submerge the device in liquid. This may be dangerous and will

damage the device. Do not use this device near water.

- Make sure nothing is placed on the cable. Do not use this device in an area

where the cable can become worn or damaged as a result of people walking

over it.

- Do not repair this device yourself. If you open this device, you may touch live

components. This device must only be repaired by qualified personnel.

- Under the following circumstances, have the device repaired by qualified

personnel:

- The cable or plug is damaged or worn.

- The device has come into contact with rain, water or another liquid.

TRUST DIRECT WEBSCAN 19200

3 Installation

3.1 Uninstalling old drivers and devices

The most common cause of faults during installation is the presence of a driver for a

similar, old device. The best solution is to first remove all drivers related to old

devices before installing the new driver. Make sure you only delete programs for old,

unused (similar) devices.

1. Enter the Windows ‘Safe Mode’. (Press F8 when starting Windows before the

Windows start screen is displayed and select ‘Safe Mode’.)

2. Click on ‘Start – Settings – Control Panel’ and double-click on the

‘Add/Remove Programs’ icon.

3. Find all the programs for similar, old devices and remove these by clicking on

the ‘Add/Remove’ button. When in the ‘Safe Mode’, it is possible for some

programs to appear twice. In that case, remove all the programs which

appear twice.

4. Restart the computer.

3.2 Installing TWAIN in Windows 98, Windows ME,

Windows 2000 and Windows XP

Note: The latest drivers can be downloaded from

www.trust.com/12389. Make sure you use the 12389-02

scanner version 2.0 (48bit HW) driver. Check whether a new

driver is available and use this for the installation.

Note: Make sure all other programs (except Windows) are closed

during the installation.

Note: When installing the Trust Direct Webscan 19200, you must first

install the software and then connect the scanner to your

computer’s USB port.

1. Start Windows.

2. Insert the CD-ROM containing the drivers and the applications into your CD-

ROM drive.

3. The Trust Software Installer will start automatically (see figure 1). If it does

not start automatically, select ‘Run’ from the Windows ‘Start’ menu. Type

[D:\SETUP.EXE] and click on ‘OK’.

Note: In the example, ‘D’ is used to indicate the CD-ROM drive. Check

which letter is used to indicate your CD-ROM drive.

4. Click on ‘Direct Webscan 19200’ to start the installation of the TWAIN driver.

5. Select the language version of the TWAIN driver you wish to use and click on

'OK'.

6. Click on 'Next' to continue with the installation.

7. Specify a location to save the driver to (if necessary) and click on ‘Next’.

8. Select ‘Custom’ and select both options in the next window. Click on ‘Next’.

9. Specify a location to save the program icons to (if necessary) and click on

‘Next’.

10. Click on ‘Start Install’ to copy the files to the specified location.

11. After the files have been copied, click on ‘Yes’ if you wish to view the

hardware tour. This tour explains how to connect the scanner. Click on ‘No’ to

complete the installation if you do not wish to view the hardware tour.

TRUST DIRECT WEBSCAN 19200

U K

12. Click on ‘OK’ to complete the installation and restart your computer

You have now completed the installation of the driver. Continue to the next chapter

for instructions on how to install the software and connect the scanner.

3.3 Installing FineReader 4.0 Sprint

FineReader 4.0 Sprint should be installed to make full use of the scanner’s OCR

(Optical Character Recognition) function. FineReader is a program which scans text

and converts it into a text document. This text can then be edited in a word

processing program. The CD-ROM contains a detailed instruction manual for this

program, which can be viewed via the Trust Software Installer menu (see figure 1).

Follow the instructions given below to install the program.

1. Follow points 1 to 3 in chapter 3.2 to start the Trust Software Installer

2. Click on 'FineReader Sprint 4.0' to start the installation (see figure 1).

3. Select the language you wish to use for the installation and click on ‘Next’.

4. Click on 'Agree’ to accept the license agreement and continue with the

installation

5. Fill in your name and possible company name. Click on ‘Next’.

6. Click on ‘Next’ again to confirm your information.

7. Click on ‘Full Installation’ to install all the components.

8. If desired, specify a location to install FineReader to and click on ‘Next’.

9. Click on ‘Next’ again to confirm the location.

10. Click on ‘Go’ to install the program in the specified location.

11. After the program has been installed, you have the option to register online.

Click on ‘Skip’ if you do not wish to register the program.

12. You have now completed the installation. Click on ‘OK’ to close the

installation program.

3.4 Installing Ulead Photo Express 4.0

Ulead Photo Express 4.0 is a drawing and editing program that offers a large

number of options. This program can be used to edit your scanner photographs.

Follow the instructions given below to install the program.

1. Insert the Ulead Photo Express 4.0 CD-ROM into your CD-ROM drive.

2. This program’s installation window will appear automatically. If it does not

appear automatically, click on ‘Start – Run’, type [D:\SETUP.EXE] and click

on ‘OK’

3. Select the language you wish to use during the installation and click on ‘OK’.

4. Click on 'Next' to continue with the installation.

5. Click on ‘Yes’ to accept the license agreement.

6. Fill in your name and company name. Click on ‘Next’.

Note: The installation will be stopped if you do not fill in a company

name. Always give a company name.

7. If desired, specify a location to install Photo Express in and click on ‘Next’.

8. If desired, specify another location for the program icons and click on 'Next'.

9. Click on ‘Next’ again to confirm all the settings.

Product specificaties

Merk:	Trust
Categorie:	Scanner
Model:	Direct WebScan 19200
USB-poort:	Ja
USB-versie:	2.0
Compatibele besturingssystemen:	Win 98, ME, 2000, XP\nMac OS 9.x
Mac-compatibiliteit:	Ja
Standaard interfaces:	USB 2.0
Soort scanner:	Paginascanner
Minimale systeemeisen:	CD-ROM
Minimale opslag schijfruimte:	60 MB
Minimale processor:	Pentium 166 MHz
Kleurdiepte invoer:	48 Bit
Minimale RAM:	256 MB
Film-scannen:	Nee
Kleurenkopiemogelijkheid:	Ja